I just bought a furby on eBay and I’m going to make her long and name her fallopian tube
@beignet6235 жыл бұрын
How'd it go?
@erindonahue32375 жыл бұрын
nvrm It went great! If you want to check her out my tumblr is erin_studies_vocab
@Rice_Wolf5 жыл бұрын
Erin Donahue i’m going to make one and name it breadstick
@birdbrain89335 жыл бұрын
Mineslof Cat I’m naming mine fishsitck
@strxwbxrrymxlk15595 жыл бұрын
If I make one I'll call it charger
@goblinteehee5 жыл бұрын
Im not part of the furby fandom, I just want a furby of *l o n g*
@Dirty_balls5 жыл бұрын
lol same
@Victoria-hp6sf5 жыл бұрын
also not part of furby fandom but here trying to figure out how theyre made cause i think the perfect thing for my sister will be a long my little pony cause she likes mlp but.. im too chaotic to give her something not cursed
@ScreamPuffXD4 жыл бұрын
I didn't even know there was a fandom.
@imsojulia-b9k4 жыл бұрын
Commit to the religion.
@goblinteehee4 жыл бұрын
@@imsojulia-b9k hey I'm here to tell you 9 months later, I have entered the religion of furbys *high five*
@Ren-jv9ou5 жыл бұрын
Here from strange aeon's. Would love one but no money to buy a furby or its parts
@soapytoastpants5 жыл бұрын
omg did she reference this video? i would die. But yes, it can be an expensive hobby, but you can buy one thing at a time and do it bit by bit maybe! It took me a few months to get everything together!
@elliotkaniki69114 жыл бұрын
websites like offerup, ebay, and letgo have some pretty cheap furbys ! :)
@ellav80644 жыл бұрын
@@elliotkaniki6911 yeah i got one of the older versions for 38$, which is pretty cheap considering that the old ones are seen as vintage.
@macaroni76394 жыл бұрын
You can get a 3D printed faceplate on Etsy, that’s were I got mine
@thymebutter25564 жыл бұрын
Same! I have a plan for my future lengthy offspring though
@sofiamuller55795 жыл бұрын
I STAN A LONG FURBY LEGEND
@GlitteringChesh5 жыл бұрын
I never realized how much I needed one of these until now...
@besussus78215 жыл бұрын
I just finished mine he is lovely and i named him bhristopher
@yuppypuppy5 жыл бұрын
Thank you. I am going to make 50 of these
@natesenft53764 жыл бұрын
fucktard have fun spending over 6k lmao
@eli11054 жыл бұрын
@@natesenft5376 I like how you worked out the prices
@natesenft53764 жыл бұрын
@@eli1105 you’re welcome
@darkjade5 жыл бұрын
Did you use a normal furby or a buddy, and what size spine did you use?
@soapytoastpants5 жыл бұрын
Miscellaneous productions a normal furby and a 1/4” spine!
@rachelmichele76974 жыл бұрын
“What size spine did you use” that’s not a question I thought I’d see today
@anonymous-fv4ec4 жыл бұрын
@@rachelmichele7697 HAND OVER YOUR SKELTON
@mothma_am4 жыл бұрын
@@anonymous-fv4ec gimme ur skelton daddio
@7u3sd4y5 жыл бұрын
where would you think sells the fluffy/furry fabric of a furby? i havent looked anywhere but hobbylobby didnt seem to have anything that matched w the furby i plan on making long ): (spring 1999)
@soapytoastpants5 жыл бұрын
Mine is from Joanne’s and it’s really not a perfect match for color or level of fluffiness. It’s just a fur fabric from the costume section I think. Felt also is used sometimes
@imadifferentpersonnow51555 жыл бұрын
Tuesday Herrera honestly furby babies are really easy to match because baby blankets are plentiful lol it seems stupid but I got a decent match at a dollar store and it was the perfect amount of fabric I needed for 3 feet
@aleah6975 жыл бұрын
Joanns fabrics snd crafts has fur!
@theidiotsacc5 жыл бұрын
I find all of my faux fur products on Etsy
@liver-failure5 жыл бұрын
I’m gonna name my long boi Crystal Methany
@comeonmang4 жыл бұрын
Mine will be ranchup kranch the 3rd
@voidpriestess424 жыл бұрын
Perfect
@sanjanapaul43854 жыл бұрын
Thank you for this tutorial, it is very helpful. I will be making a Long Furby soon once I learn how to use the sewing machine!
@eonbree85934 жыл бұрын
wow your so passionate about furbys. i really gota say thats kinda admireable as i have passions for things such as mlp and latias. im not into the furby fandom but i did know about these long ones and i found a broken one at the donation center i work at so id thought id test my sewing skills in something that sounds like a bunch of fun such as this :D keep your passion :)
@colleenacorrigan61744 жыл бұрын
I have a long furby named Weeves Chapstick Soup
@imsojulia-b9k4 жыл бұрын
I'm gonna name mine Wigless Buba
@maggieg5324 жыл бұрын
mines name is gonna be ketamine kyllosis carp-creme the third
@glutenfurbalicious86263 жыл бұрын
Mine is gonna be Gluten Furbalicious
@someoneonthisplanetearth5 жыл бұрын
You did an amazing job, I love your design! Quick question: how did you separate the face plate from the mechanical insides of the furby with the eyes and mouth still attached? I tried googling it but I couldn't find anything.
@soapytoastpants5 жыл бұрын
i can't remember entirely to be honest, but i think its mostly brute force tbh. i think there might be youtube videos? maybe search like 'total furby dismantle or something' sorry i'm not much help!
@someoneonthisplanetearth5 жыл бұрын
@@soapytoastpants Thanks for the help! I can't wait to make my own long furby!
@mynotsocrazylife5 жыл бұрын
Hey! I know this is a bit of a late reply and you have probably found something already, but here is the video I referenced when removing mine (hope this helps!) kzbin.info/www/bejne/pp-1d4Sjrpdjpas
@erindonahue32375 жыл бұрын
Do they still talk after you make them long?
@soapytoastpants5 жыл бұрын
you can keep the electronics and work around them , but i took them out
@erindonahue32375 жыл бұрын
Sophie awesome thx sm!
@yeahsuredude70825 жыл бұрын
If you did this project again is there anything you think you'd do differently?
@soapytoastpants5 жыл бұрын
Rhea - I would probably not attach her spine to her faceplate just so I could maintain functionality of her mouth.
@dustyboialex5 жыл бұрын
@@soapytoastpants How would you attach the spine in the future, if not to the face plate?
@emmajane48554 жыл бұрын
Ahhhhh i just ordered everything!! My long furby is going to be a present for my girlfriend and will be named Jaden "ahhhhsparigus" Smith
@a_animation34505 жыл бұрын
Thank you so much this was very helpful :)
@somethingfalls9145 жыл бұрын
My friend wants one and I’m very tempted to make one for her
@aminishnamedvaati5 жыл бұрын
Normal furbys are scary, long furbys are god
@Sickwqd5 жыл бұрын
Will a wire spine work? I could only find wire armature on amazon...
@nathanasher19455 жыл бұрын
Hey! Do you know if a wire spine will work?
@soapytoastpants5 жыл бұрын
No clue. Probably!
@Todomo5 жыл бұрын
question: how do you attach the spine? some kind of glue? which kind? i have all the materials and i’m about to start making him
@playhooky4 жыл бұрын
Wish she would have answered this. It looked like a bottle was sitting on the table & I suspect it was some kind of glue. On other videos I've watched they used a hot glue gun.
@Todomo4 жыл бұрын
playhooky i ended up using super glue. it’s worked great so far with all the bending
@moss54555 жыл бұрын
Why do you only have 51 subs! That’s a tragedy! Also dang that’s easy to make
@timgarcia2595 жыл бұрын
I love these.
@Somethingbaddotjpeg5 жыл бұрын
I love long furbies
@Pedro-pf2xs4 жыл бұрын
OKG FINALLY A TUTORIAL
@kit33514 жыл бұрын
Man I just wanna make a Furby for my friend
@yumiiru76324 жыл бұрын
Hhdhdhdhdhh I know that this video might be older but i have a question, since I'm planning to make my own long furby. Can i still make them without the spine?
@sidneyr5254 жыл бұрын
toad_sto0l you can, it just wont be able to “pose”
@JesterCircus5 жыл бұрын
Where'd you get the spine? I have most of my materials but I can't quite find a spine
@soapytoastpants5 жыл бұрын
eBay! Search for doll armature
@San-fj8hl4 жыл бұрын
the dark market
@SodiumUluminie5 жыл бұрын
How exactly did you attach the armeture to the face plate? Glue? Screws? Power drill?
@MothCattuchini2 ай бұрын
For those who wanna have a long boi but are poor like me: You can make the face plate out of clay and get the fur fabric from charity stores clothing items like fluffy robes! That's what I did and now I have scraggly mc scragleton.
@edtheoneandonly90414 жыл бұрын
Any name suggestions for mine? Also what did you use for the spine?
@alternate73624 жыл бұрын
Good thing I bought a 1998 furby for $5 at the flea market, I'm thinking about making a peppermint patterned long furby.
@brip15625 жыл бұрын
if i make one out of the little keychain furbs, do you know how i’d sew the tube body? ty
@RM-sm8tc4 жыл бұрын
I'm off to making this my summer project.
@MrMrwhisker14 жыл бұрын
I have 2 questions. How much did the materials cost and where can I buy that lovely spine? I’m deciding whether to just buy one on Etsy or make one myself
@kookytanuki50614 жыл бұрын
Want one so bad lol idk y but idk if i can make it and are priced high 😂 I didn't know I wanted one of these till now 😂😂
@blossomnessstudios44464 жыл бұрын
My girlfriend and I are planning to make one of these, we just need a furby first lol. I'm planning to use wire for the spine as I think it'll work okay.
@cupidb0nes5 жыл бұрын
How does the spine stay in?
@soapytoastpants5 жыл бұрын
i glued it to the inside of her faceplate
@playhooky4 жыл бұрын
@@soapytoastpants What kind of glue did you use???? What diameter size of spine/armature did you use, & are you happy with that size or do you wish you went bigger or smaller???
@JoMomma_____285 жыл бұрын
Can someone provide a link for a long furby spine? I cant seem to find the correct one, or I find it but it's not long enough.
@soapytoastpants5 жыл бұрын
www.comiccon.co.kr/ko-kr.html this is the one i used or a similar one
@ie82075 жыл бұрын
Where did you get the “spine”
@hasumikeito5 жыл бұрын
is it possible to make a long boi with the more recent furbies?
@maxhill15664 жыл бұрын
It is indeed, but if you want to remove the mechanics then you’ll need to paint or otherwise make new eyes, My furby Jester Bumfuzzle Peanut Ramsay was made with a furby Boom and has custom eyes
@wildlylucky4 жыл бұрын
yes but it is so complicated
@needsbread63684 жыл бұрын
I’m planing on making a long Furby and naming him potato wedge
@phantommedia65895 жыл бұрын
Do all furbies have like a fluff tail if so how do you work around it and potentially move the tail down? I’m new to this and my Furby has a little fluff tail it I wanna put further down on the body by idk how
@greenwater50594 жыл бұрын
How much money did this project cost in all?
@beignet6235 жыл бұрын
If not to the faceplate where would you glue the spine?.
@gangnopolis4 жыл бұрын
hey how do you put the spine in place because im trying to and the other cylinders that arent connected to the spine are upwards
@Ali-hu3ef4 жыл бұрын
I'm not in the furby fandom but one of my life goals is to make a god such as yours
@Corvin_Ito5 жыл бұрын
Anyone know how to make a working long furby?
@eeeeeeelemons4 жыл бұрын
My plan to make two long furbies based off of characters from My Hero Academia, because I’m a hopeless weeb. Their names will be Chicken Nugget and Hotshot. I think a black furby with purple patchwork all over would just be really cool looking. And if I’m honest, a red winged furby with yellow eyes would be very beautiful.
@thatwolfchick215 жыл бұрын
I love you
@sfrederickson26195 жыл бұрын
Where did you buy this material? It looks exactly like what I need 😂
@elizabethkoski2404 жыл бұрын
How did you get the actual face of the furby out of the electronics?
@glutenfurbalicious86263 жыл бұрын
I made a Long furby discord server incase anyone wants to join here's the link: discord.gg/3mstKRZGBv
@ld-xp7rw4 жыл бұрын
Can I get the spine on Amazon?
@perhaps95674 жыл бұрын
Nice tutorial but how do I make it 3 headed?
@JMunny5 жыл бұрын
Would a 1/8" spine work instead of a 1/4" spine? They don't sell 1/4" inch spines anymore.
@soapytoastpants5 жыл бұрын
probably! it may not stand up independently very well but it should work!
@jacquelinemoreno16914 жыл бұрын
im kinda having trouble understanding the pattern. what are the measurements?
@lyssnelson14 жыл бұрын
Where can you find cheap spine sockets?
@vb0.o4 жыл бұрын
do you know if this is possible with a furby boom?
@egggyweggy31125 жыл бұрын
Where did you get your furby?
@toxicthelynx72014 жыл бұрын
I want this as a prop for my fursuit
@devon7125 жыл бұрын
On what I'm confused?
@theboba_addict3 жыл бұрын
if you don't know you can buy just the face plate off etsy to save money. ppl 3D print them and thats how im going to make mine
@reais12154 жыл бұрын
Can you make a long furby without a spine?
@glutenfurbalicious86264 жыл бұрын
Yeah but they won't be exactly posable.
@kcharris134_35 жыл бұрын
I'm currently making one that's 5ft tall cause I'm extra af, but I have to dye the furby and so far I've resorted to colouring the fur with felt pen to match the extra fur I bought:( The fur for the furby was like a cream with brown patches and I didn't wanna bring it around with me until it was done and the only place near me sold only solid colours so I just was like ITS FINE ILL DYE IT. Wish me luck pls x
@soapytoastpants5 жыл бұрын
ahhh good luck i'm sure it'll turn out great!~
@dakotariley55105 жыл бұрын
how is it going?:)
@wildlylucky4 жыл бұрын
Hey how'd it go?
@kcharris134_34 жыл бұрын
I just got reminded of this, I have made her, she is beauty and grace, I'll post her and her gloryness when I get the chance🖤 I'll comment the link
@prettycolors24 жыл бұрын
Hellooo! this is Chef John from food wishes dot com. With Long Furby. Don't forget you're the Herbert Herbie of your Long Furby.
@spookymae4 жыл бұрын
i want to make a long furby soon and this was incredibly helpful lol One quick question though, how does length work with the spines? If I am making a furby longer than a foot do I need to get several spines that are a foot, how does this work I do not understand!
@Caldella4 жыл бұрын
Look for a place that says they ship the spine material to you as one unit. I'm currently working on a long Furby (only on painting the faceplate/sewing new peets for it RN), and I ordered the ball jointed armature (aka spine material) from CR"s Crafts. I ordered 3x 1 ft. sections, and they sent it in one long 3 ft. piece. Will say ordering from them was weird, as I didn't get a confirmation/shipping email, but I got the material itself within a few days. There's someone on eBay that sells it as well.
@spookymae4 жыл бұрын
@@Caldella thank you!
@charlie.37874 жыл бұрын
My long Furbys name is Snake Noodle Soup 😂
@starberriiemmy43824 жыл бұрын
I’m doing this for my art badge at girl scouts-
@ld-xp7rw4 жыл бұрын
@Sophie what could I use in place of the spine
@threecheersforsweetcheesew32314 жыл бұрын
There are multiple options, if you want it to be posable you could use wire, but if you don’t than you could just not use a spine
@banditdrit74064 жыл бұрын
I'm currently making a son for my boy Mr. Burns. I made the face out of clay lol
@MothCattuchini2 ай бұрын
me too hows mr burns going 3 yrs later :D
@holoragiummediocris76505 жыл бұрын
Does it work after the longification?
@RedRaiderFilmsLLC5 жыл бұрын
Holoragium Mediocris nope
@RedRaiderFilmsLLC5 жыл бұрын
There are ways to do that tho
@Aa1aaaaaaaaaa4 жыл бұрын
i'm trying to purchase an inexpensive furby buddy on many places but most if not all listings are big money for a broke child eeeeeeeeee
@pillbugheart4 жыл бұрын
Dude ikr! I couldn't even find any furby buddies for cheap, literally the cheapest furby i could find is currently the only one i have which is the Christmas 1999 furby, but im not gonna longify her because she's a limited
@bunny_galaxy4 жыл бұрын
There's people who sell 3d printed/resin furby buddy faceplates if you can't afford a furby buddy or don't wanna tear one apart! There's one on etsy who is selling printed ones and @walrus-furbs on tumblr who sells custom colored resin ones.
@laughing_gas_50985 жыл бұрын
What kind of fabric is that
@soapytoastpants5 жыл бұрын
it's just fur fabric from the fabric store!
@Jodiejg764 жыл бұрын
ive had my furby for a year, i still need to make him long but i have never sewed anything in my life oops
@furbymaster42394 жыл бұрын
Do you have to have a spine to make one?
@soapytoastpants4 жыл бұрын
Furby Master nope! It’ll just be extra noodly
@constipatedhamster77454 жыл бұрын
I have one, I need to make it l o n g but I can’t
@rqvishing40895 жыл бұрын
Was the fur inside out and then you unfolded it?
@soapytoastpants5 жыл бұрын
Electric Potato yep
@autopedu18064 жыл бұрын
furbies kinda creep me out which is why i love them ngl
@jaydenkay58714 жыл бұрын
I'm going to make a long teaddy bear because I can't afford a furby.
@kekelli15414 жыл бұрын
How long is the spine?
@soapytoastpants4 жыл бұрын
Matthew Matarazzo three feet I think
@kekelli15414 жыл бұрын
@@soapytoastpants alright, thanks
@mynameluvsdragonscancelled67595 жыл бұрын
I’m the 361st person to like
@jordan18315 жыл бұрын
how did you detach the eyes and beak?
@MetobiInc3 жыл бұрын
1, buy the parts or 2, break down the furby until it is only the eyes and beak