LONG TRAVEL for NOT a lot of MONEY? PLUS Bucko’s 50pt Mustang Inspection 🤣

[@LucoreAuto]

Always happy to help out Sir, thanks for trusting us once again with another of your rides! Editing our video right now... SHOULD be up by 6pm EST tonight. As long as we don't get distracted too badly with other toys sitting around here wanting attention 😉 Looking forward to a test launch to see how much difference the "tweaks" make!

[@davidwiley2913]

Ditto on the brake line part number

[@LucoreAuto]

@@davidwiley2913 Video just went up :)

[@RealSteelStreet]

@@bradleydunford725 all the parts he used are listed in the first video description from Lucore👌🏼

[@kevinjones3251]

Uncle Bucko is funny AF. Love his sense of humor, and that's coming from a Ford guy. Lol

[@garylucier6817]

Notice though, for a guy that hates Fords, what his old still unfinished mod rod skeleton is in his own garage, isn't it a very early model Ford? Or am I mistaken? Not to uneasy to do with all the vehicles you guys all have.

[@CCRider5312]

@@garylucier6817 I was thinking it’s an old Chevrolet I thought I heard them say.

[@51-FS]

I think it's a chevy. But not sure

[@augie-dawgiewright3798]

@@garylucier6817 Jeremy's future "toy" is a '36 Chevy Gary.

[@jerryhatrick5860]

Same, dry n quiet expresions are more than words. Hes a funny lil shit.

[@freddiemoralez1536]

We can never get enough of uncle BUCKO the comedian. Shout out to A1 & LUCORE. GREAT CONTENT AND GOD BLESS ALL

[@CCRider5312]

WOW 😲 1.5 hours and Mark has located 2 axles all the hardware to install, 4 new tires and Rims and delivers it all. GOOD OLE PARTS GUYS LIKE THAT ARE VERY RARE!!! Shout out to Mark at A-1 Auto Parts. 👏 Buckeye lake Ohio y’all are lucky 🍀 to have a Parts Guy like that !!!!!!

[@troymyers5181]

I'm very impressed also. Most part stores you'd be lucky to get them within a week and you'd be picking them up yourself too.

[@garyclarke2385]

There all just what a rural community should be like, helping out if and when you're asked or needed... I LOVE WATCHING ALL THE SRC CONTENT, BILL, BILLY AND TOMMY TO..TOMMY IS GETTING TO BE A PRO AT EDITING, RECORDING AND EVEN GREAT QUESTIONS..BE A GREAT RACING PUNDIT AND ABLE TO SAY AND ASK THE RIGHT THINGS TO THE RIGHT PERSON...BOTH BILLY AND TOMMY ARE A FORCE TO GO UP AGAINST....AGAIN ALL STARTED WITH BILL ASKING HIS DAD TO GO ZOOM ZOOM IN THE 55 !!!.... THE REST IS HISTORY AND THE STORY IS STILL BEEN WRITTEN TO....

[@craigengelman4534]

tractor supply 10 mins and walk out with the parts in hand

[@donhorner6019]

They don’t make em like Mark any longer,he’s a dying breed.

[@CCRider5312]

@@troymyers5181 yep that’s the way it’s gotten but it really should be like ole Mark runs his parts store! It’s not just called building up a clientele it’s called building RELATIONSHIPS! When Mark or anyone else goes the extra mile and builds relationships THEY HAVE PAYING CUSTOMERS FOR LIFE. When they make you wait and do your own leg work, they have would be customers that’s looking elsewhere for that Parts Man/customer relationship.......

[@rayrussell6064]

Mark never seize to amaze me coming up with all the parts for your trailer in a hour and a half including delivery and for uncle bucko to get it back on the road that quick. At least you'll have content by owning the mustang with leaks from every orfisess lol . To all a happy valentines day God bless and as always be safe 👍

[@jameslovitt994]

Ol' "chumpy", lol!

[@billyray8062]

Rich at Lucore is a master at doing alignments on race cars. Bill great job making points with Vicki for Valentine's Day.

[@joshholden8561]

Mrs Vicky's eyes seeing those flowers 🌺 will melt ur heart nice move uncle Bill !

[@richsadventure9736]

Detroit locker for the win! That's all we use for for all rear differential build's, super strong and very street friendly without giving up performance 👌

[@ThomasThomas-wn3km]

Jeremy is a real hoot! He has the best comments. Bucket of turds, race wiring, LMAO! I can't wait to see what Rich did with the calipers/pads to make it free wheel the way it does.

[@kevinlawrence4066]

Uncle Bucko should be on the next Comedy Central roast as one of the roasters. That boy swings for the fences every time. lol.

[@scottcooper346]

Thanks for advertising for perfect converter I own a high performance shop in Maryland and I am in the process of becoming a dealer for them. GREAT PEOPLE!!! Thanks again Bill

[@jeffmonroe9766]

Love Vicki and her procrastinating ways a gal after my heart as I have procrastinating down to an art.

[@alanmontanus9315]

Enjoyed listening to you & Ms Vicky banter back and forth (always funny)! Was pretty impressed by the short amount of time it took to locate, and have the complete trailer axles delivered! Damn! Bucko is always in form lol.

[@NastyNate98]

Bet those freed up brakes in the front help with fuel mileage as well. That's bad ass. I need to go watch that video

[@vsrgarage]

Uncle bucko inspection are the Best lack of maintenance. Uncle bill thank you for all the awesome content

[@johnperun232]

Lucore Auto did Great on your Malibu Have a Great Day 👍 God Bless America 🇺🇸🙏🇺🇸

[@6spd85notch]

My hats on it’s way Ty.

[@WDMtea]

The first 2 minutes of this vid has me dead!! Grumpy old bastard is funny af with his critique of the Mustang !! love this channel lol

[@stephenhale8445]

I love all of the content but Uncle Bucko just brings tears to my eyes! Brilliant.

[@donhorner6019]

Bucko was in hoot mode this am,had me laughing. Good to see the trailer got some love,Mark IS the man.

[@randycarter429]

If it weren't for Bucko this channel would suck

[@gf6.6]

Uncle Bucko had me laughing so hard!!!!

[@glamiskid50]

Mark is on the ball and Uncle Bucko is top notch trailer repairman happy Valentine’s Day to Miss Vicki beautiful flowers two thumbs up Bill can’t wait for the red hats hope to get one this time. Love y’all

[@jakessmallengines]

That motor and engine compartment looks sweet ! Ready for the next big car show ! A+

[@Highstranger951]

Bill, I can’t stress enough how good the Eaton Trutrac differential is!! It’s the best of both worlds without compromise. Stronger too. It’s the perfect diff for a street car without the noise and ratcheting of the locker. Drives like an open diff around town but locks together when you get on it seamlessly.

[@steverathwell2173]

I was going to say the same thing!

[@Highstranger951]

@@steverathwell2173 it is soo good

[@steverathwell2173]

@@Highstranger951 I have it in a big old Cadillac.. :)

[@Highstranger951]

@@steverathwell2173 that ain’t no slow boat..! Nice!

[@mrhighlight8771]

Bill and Ms Vicki have already collected a few extra grandkids 😊.. What a joy that people love you along with all the kids and family. We are all one and together anything is possible.

[@jonathanhanners6057]

Uncle bucko is funny as hell can’t wait to see more of the mustang

[@beeboopbipip2403]

Love to see the 55 up and running.

[@kens.2753]

Uncle Bucko could never keep your late night hours and make it in the morning like you do Bill..... Thanks for another great video. Salute.

[@biglon62]

I love Uncle Bucko a man after my own heart!😂😂😂

[@jrhalverson1280]

Uncle Bucko delivers. That inspection was pure genius.

[@MsMoose1979]

Love when Uncle Bucko goes on his rant! What a tease on the truck action. All hands on deck!

[@michaelstephens7588]

Would like to see more videos like this. Learned something’s. That stock caliper modification is awesome. Wheels rolled nice!

[@Godsy_Garage]

The longer I have a channel the more I respect the Discipline it takes to edit a video same day and get it uploaded . As always thanks for uploading mr. Bill

[@theoldmansgarage]

Thank you

[@mr.bigblock1316]

@@theoldmansgaragehello how are you Would you advise to replacement engine mount for my C1500 obs big block engine 555 cid replacement engine mount to solid mount ???

[@mikemontgomery7337]

There's Kenny ! Has tools will travel to who has the best job of the day !!

[@Gokywildcats11]

That's very generous of the bucket of goodies.

[@mrimpalarider1606]

Heck yeah. Just got off at 2 got home 2:30. Got cleaned up and BAM the best channel done did post!!!

[@sampson7941]

That Lucore is i nice gem of a shop. Cool that they have some knowledge and tricks

[@justo2101]

Thanks bucko needed that laugh

[@brianstephanierobertson357]

Really enjoyed the video, like uncle Bucko 's input on the mustang!!! Made my day much better!!! Keep up the good work. Mark should open up a franchise of good auto parts stores!!!!

[@randycarter429]

Yea he could make a fortune if they keep buying Fords lol

[@damonrice8469]

Well, have driven a Ford latley??? Lol. Well, I still love this channel, and all the wonderful folks in it. Mr Bill is the best narrater in the mid Ohio. Great job uncle Bucko. Happy Valentine's day Mrs. Vickie.

[@havablast70]

I need the brake drag trick for sure!

[@stevefrano2777]

I learn so much from this channel! Thanks Bill!!

[@joesheehan6000]

Living the American Dream, great family and friends.

[@meghandawson7905]

I love how your brothers straight face humor

[@tca375]

So fortunate to have great businesses near by!

[@Dirtnap300]

Honestly, Jeremy content could be it's own channel.. He is on another level of crummundgonery (if thats a word?) that guy is hilarious.

[@thagerdorn2009]

I live close to that car wash and frequent pataskala a lot. It's awesome to see someone with a badass Malibu close to me. Hopefully I'll see it out and about. I've gotta get my 80 Z28 ready for power tour

[@bradnichols2474]

Thats gotta be some mph and et in the brakes alone! It's time to refresh the front of mine now! Love this channel!

[@travispeoples]

You'd love the Eaton Trutrac differential... I have them in two of my cars and absolutely love them.

[@curtismorris8243]

"The Bickersons". You guys kill me.

[@MrDan1509]

From the last video, i bet that smoke puff when shifting is the darn Valve Guide Seals. One thing that has to be replaced if a Ford overheats. Even slight overheating kills them. I would replace them all and also drop the oil pan. Last thing you want is for a chunk of seal to bind up the oil pump and take out the roll pin on the distributor gear!

[@christopherhill6064]

Thank you for sharing. I need to do this front suspension mods to my S10.

[@1982MCI]

Let’s Roll 3am Crew!!! Lol 😂

[@onegative8887]

U know it lol

[@robertgreat1746]

Yeah

[@squidgymop1]

It's 8pm here buddy Wednesday night

[@ridingwithlucas1745]

Yep lol

[@danielbryant9837]

Put Kenny Powers on the mustang detailing!!

[@clydegreenwood5673]

Thanks for sure and I like watching your videos and you guys are awesome people and good luck and be safe and God bless you guys

[@kennethchapman9564]

I have mellowed in my old age. I used to hate anything GM and Mopar with a passion. However over the years I bought my wife a Dodge Dakota and a Cadillac CTS. The CTS is really a great car. My Dad owned everything from Renault and Hillman, to GMC, Chevrolet, Plymouth, Dodge and of course Ford's. So I understand the non GM hate and it is pretty funny Bucko ragging on the Mustang when his pickup looks like it does, Lol. The Malibu is slowly but surely changing. Surprised you didn't put a Detroit locker in third member to begin with for better street manners. Go fast and be safe. God bless you and your family.

[@812racing]

Just got off work got out the shower and see at the top of my list old man’s garage! Great way to end the night! Thank you for keeping us in mind bill much love!

[@burtmoore2101]

Can't wait to see it launch now!

[@luiscarrasquillo9743]

That front suspension looks great 💪🏻

[@AMeZoRaCiNG]

Uncle Bucko is a National Treasure. I almost woke up the whole house laughing. All He did was be Himself.

[@arthurgoldman3136]

When I converted my G-body to manual brakes, i swapped out the "low drag" factory calipers for Afco calipers and a Jegs PTFE/Stainless brake line kit similar to yours. Also used synthetic grease on the wheel bearings. (Mobil SHC 220 Synth lube) I don't street drive my G so the swaybar is on the shop floor. Weight savings is weight savings....

[@COYOTE_N8]

Lol I'm actually loving this 5.0 coyote I just bought. Working all these damn nights finally paying off

[@bobtucker8875]

Thanks for sharing ☺️. Till next time.

[@jarroddomingos]

Put in a WaveTrac best thing I have found!! I pulled the spool out of mine and put one in and absolutely love it!!

[@ericdanielson1138]

Circle track Trick, put those Upper Ball Joints on the underside of the upper control arm and gain a 1/4 + inch more on the travel.

[@brandaneakright6082]

Great video can’t wait to see the foxbody content coming, still really like the Malibu too. Honestly I only use Jaxwax for all of my detailing, they’re second to none. Keep up the great work guys.

[@DonCatherman]

Another great episode Bill, 👍👍😎💪💯

[@scotthazelton519]

Great content Bill, Thanks for sharing

[@KeepGrindingGarage]

Jeremy's pile'a sh*t meter had me rolling 🤣 😂..."extra piston ring...bonus"..I swear if he had one day that he didn't complain I'd think something was wrong with him..lmao..🤣🤣🤣

[@jackperry9369]

Uncle Buck oh he's an original for sure 😂 what a character I'd love to meet him that would be hilarious

[@elsdp-4560]

Thank you for sharing. You go Mark at A-1👍

[@jd440]

Bill, you gotta lighten that Malibu up some. Tubular front suspension. Tbm brakes all around, Fiberglass front end, fiberglass inner fenders, fiberglass stock type hood, both bumpers, trunk, replace what brackets you can with aluminum style. Get the professor of weight savings to help you out...(tony P). Might be able to shed nearly 300lbs off it. Would help out quite a bit. That front end will have no issue coming up then. Keep up the good work. Can't wait to see what lucore did to those stock front brakes on it. I may have to try that on my own car. Every little bit helps.

[@joshuarivera7622]

Uncle Bucko cam was on a roll today🤣

[@pauldhiman8369]

ThanksBill just on coffee break🤠👋🏾

[@jackdeath5856]

Ms Vickis Price is Right was spot on!!! Haha She is funny!!!!

[@joeldossett9606]

Best content on KZbin.

[@joeldossett9606]

Yeah right

[@jacobsawtelle5429]

I had a Detroit locker in my 12bolt for a k10 it was alright but it does bang when it is going around the corner not all the time but it does make you think that something is going on. 85 Chevy 406 4” lift 373gears 35” tires.great content once again

[@joeferreira7382]

a good learning experience 🕶

[@jamesbranner4029]

God I wish we had an A1 auto and a mark in michigan!

[@RustyRowdy]

Looking forward to that big launch

[@BIGFESH]

Perfect timing 👌 nice little treat before bed. Best channel on youtube!!

[@Bandit74.]

Looking forward to seeing it going down the track... Definitely can't wait to see what all y'all do to the mustang..

[@dustinpoor2286]

Once all the videos get to the detail parts .. I start getting depressed an start looking for another video!!! 🤣🤣!!!! 4 yrs Ago I bet you would of told someone to to get bent if they thought you would of gave up moving dirt to be a you tuber!! An now I swipe down in the comments an I can't find a shitty word anywhere....fantastic job ad usual!!!

[@coryholbrook4643]

Ooooooo I want to know that trick with the calipers if it doesn’t add a whole lot of pedal travel! Mine drag so bad the wheel won’t make a half a turn after I let go.

[@mikebanks5480]

Good morning OMG/SRC! Same any who reads the message have amazing day!

[@mikeclark740]

Looking good brother hopefully you fall in love with that forward and keep it piss everybody off

[@leeashworth9874]

Great video Sir

[@dangerranger3297]

good to see kenny. seems like he isnt around much these days. wheres those tan colored hoodies on the sight? i see them in the shelf back there but not on the sight..

[@glennramsey917]

Ive definitely gotta watch what he does to the caliper if he shows it … thats important in all aspects .

[@inthegarage342]

Right on time old man! 😉

[@camm_fish]

The cast of characters on this channel is top notch lol

[@davidprieto7876]

Bill, enjoy your video as all ways from the Old Man in Tampa Florida my God bless you and Ms Vicki

[@ls_812]

The bickering is one of my favorite parts of videos 😂

[@AlmostFinished215]

Heard about this crazy explosion in Ohio. Stay safe Bill. Thanks for the content while I deal with being an insomniac 😂

[@Alexgomez411]

Sir just removing bumb stops gives you the 2" and they aligned it with those tires lol

[@robertquackenbush5547]

That hat looks really kool bill

[@atche8004]

ever consider going on a drag week of sorts, I know it isn't exactly your style of racing but just wondering? love the videos!

[@junkyardjunkie7192]

He was talkin bout doin some drag and drive stuff in one of his recent vids i think he would do very well

[@atche8004]

@@junkyardjunkie7192 agreed brother, i think it would be sick.

[@davidharris5533]

I believe Uncle bucko has found his calling! I've never seen a man more happy than him working on a Ford. Can his new nickname be mustang Sally lol. Think bill has went soft for Fords as well. Love the content keep it up.

[@thomasfelts2857]

Meant to tell ya, I have been detailing for over 12yrs, wet sand and buff, interior. When ya down in Wilkes county give me a holler for your detailing needs. Thanks

[@KrzyKanuck81]

Lol Uncle Bucko is awesome ...He needs a channel stand up comedy ! 🤣👍

[@RealSteelStreet]

Part# 47170 are the Trick Springs you needed (big block Malibu and/or Camaro)…but since yours has AC, they go by weight. Those are rated at 2100-2200lb front end weight👌🏼

[@RealSteelStreet]

I daily drive with them on a C1500 with a BBC & AC…matched my 5” drop rear with no cutting. My truck weighs 2500lbs out front, so I KNOW it’ll keep yours off the bump stops! Prolly actually WILL have to cut those a little for your car 🤷🏻‍♂️ Remember, if they say “small block Malibu” they’re referring to a gutted/lighter drag type car. But, as I said they have a specific weight rating and at 3800lbs your car should be 2100-2200lbs on the front based on 55-58% guesstimate👍🏼 They drive just fine when rated correctly! And it’s crazy launching, feels like you’re planing out a boat 🤣 But they WORK🤘🏼