Welding Turntable Part 9 - Final Video

In this video Rob will embark on creating a welding turn table from things found lying around his garage and around the Longevity shop. In part one he will plasma cut rim to create a base for the turning mechanism. Also Rob will go over the theory of the creation of the welding turntable and how it will work. Rob uses Longevity's Innovator 255i to plasma cut the rim. For more information on the Innovator 255i follow the link below:
www.longevity-inc.com/innovato...
Portable MIG-TIG-STICK Unit
The LONGEVITY PROMTS® 200i combines 3 welding processes in 1 machine with an impressive 200 amp MIG welder, 200 amp TIG welder, and 170 amp STICK welder.
Easy Push-Button Setup
The PROMTS® 200i is very user friendly! All the
adjustments are properly spaced and coded which allows
for easy on-the-fly adjustments. The grouped and coded
system allows the user to see the settings quickly and
make necessary adjustments easily, allowing the welder
to more efficient in the workspace and a fine shaped arc!
Powerful, Reliable, Efficient IGBT Technology
Longevity offers cutting-edge technology in the
PROMTS® 200i by including IGBT semiconductors inside
this unit. IGBT technology makes this unit more reliable
than other comparable units using old-fashioned
technology. By using IGBT components, LONGEVITY is
able to offer a potent welder that is lighter and more
space-efficient than its outdated counterparts.
Digital Amp and Volt Meter
By using digital meters, LONGEVITY gives the operator
instantaneous outputs which are easily read while welding.
This allows the user to dial-in their favorite settings
accurately, again, and again!
Larger Wire Spool Capacity
LONGEVITY understands the importance of time and
money. With this PROMPS® 200i, you are able to use 11lb spools for longer welding times without having to
change the spool. This also saves you money as you are
able to buy larger spools at greater discounts. Do not
need to use that much wire? No worries. You are able to
use small 1lb rolls of wire without additional equipment!
Burn Back Control
LONGEVITY uses Burn Back Control to prevent excess
amounts of wire from sticking out by providing extra arc
time without feeding. This allows the user to make
excellent re-starts as smooth and painless as possible.
Stick With Adjustable Arc Force
With Arc Force, you are able to adjust the inductance of
the arc for either a crisp arc or soft arc with a fluid puddle.
This will allow for greater control of your welding
parameters.

[@h3coyote277]

It turned out awesome..! I admit, I jumped around the videos a lot, but it's totally an adhd thing... Yeah, that's what I gotta do to replace my welding "desk" top. Totally impressed with your work, thanks for sharing this one..!

[@johnfranks2602]

For a turntable I think sprockets and a chain are overkill. Pulleys and a belt would probably work great. Thank you for the excellent tutorials!

[@Mrjoelaguirre]

Great Job!

[@Mrjoelaguirre]

No more uploads I'm waiting for new video

[@6sacres]

add a jack shaft. two more gears its and easy way for reduction

[@douglasthompson2740]

You still have room for a bigger sprocket under the work surface. Then go for an intermediate gear. You could go to a belt system to. Doug

[@boywonder768]

Put a bucket on the top and you have a cement mixer.

[@glenndavis2762]

Rob, you could always sell it to a pizza shop - kidding :)

[@Steve_Just_Steve]

Not sure why he described all the details of a nonfunctional turntable. Why the hell not just put a small wheel on the drive end and have it contact OD of turntable.....?

[@Bigtwin88]

If you put a bigger sprocket where the little one is....,It will slow down

[@t54760]

Nope. That would make it turn even faster.

[@thewarrantycenter]

Is there any way to get help from Longevity, I have a 256IP that worked great on arc welding but the first time I used it for plasma cutting it stopped working completely, I called and emailed tech support 4 times with no feedback, I told them I will pay to get it fixed but they did not reply. I wish I never got this welded. I was doing my car and now I am at a stand still.

[@longevitywelding]

Hello. Im sorry for not being able to respond to you in a timely matter. Please give us a call at 510-887-7090. We will love to assist you.

[@rsz90182]

Man that is some ugly work !!!!

[@SWC44]

NO BUDJET!!! and TO FAST,,, thats a New One!!! Wish I Had the One I sold!!!!!!,,,, It Had a Ft Pedal,Like a Tig Welder!,,, I Had 4000 sch 80 6Inch Pipes to weld On,,,, 6x6 3/4 Plates I Made,well Iron worker Wacked em,,, out Of 3/4 x 6 Bar I Do Have Reg Pics,,Which accually I Have 27 Boxes that Need to Be scaned,I Missed the digital Cameras By 5-6 Months,,when they were 900 Bucks,, Like Calculators when they came Out!!!! But,,, with RR as Pres,and Going Thru a MIN Of a Pallet Of Lincoln 7024,Jet,a Month,,,, Money was Like Water,,, Cause CT had a Ton Of Industry!!!!!!!!!! but,,between Our Gov and His Bro Inn The Big W House,,Theve CLOSED CT!!!! Stanley, Allegheny Ludlum, Skiorsky,Pratt will be OUT IN LESS than a Year,No Brasss Millls, Well,No NUTTIN! PS,on your turn table,, why Not Just Change the sprockets Then,But a Controler Should Be Fine,as i had Approx, 33 Ponnds On,, Not aot,But also did a TON,of 12 In sch 40 Also,,, Thanks,, Jack,Is Charlie Still there??????? Thanks again,,, Tell Him,Jack from Storts said Hellow,and My Dif cell is In Here Someplace,,, Thanks,,,,,PSS,love Kevin in Chinese,,, a RIOT!!!!! Pisss yer Pants FUNNY!

[@gattbe5611]

i'm sorry, but this was a complete waste of your time ..I think if you had spent those hrs doing some research,you would have been able to make something that works..I understand budget limits.. that was not the fail point, IMO.