You just saved me a headache and money, you're a gentleman and scholar!
@donr87732 жыл бұрын
Fabulous to know. Several of my Callaway ApexPro ‘16 irons have had this problem from virtually new. Thank you very much.
@Sixxiron Жыл бұрын
Great video for something I thought was going to be much more complex - thanks for doing this!
@bobsofia683 жыл бұрын
Recently bought some old Maxfli Australian Blades, absolute classics, and every single one had ferrule creep like this. Used a heat gun set on lowest setting (hairdryer would work as well) and a dab of JB Weld epoxy. So easy even I couldn't mess it up.
@sargentkolteryahn29542 жыл бұрын
AJ! This is Sarge! Love you bro! You have taught me a lot! But maybe i can teach you something i have learned! If you take a micro fiber and spin the clubhead with microfiber around the ferrule it will heat up very quickly! The ferrule will start to spin! No water wasting!! Lol! I then use gorilla gel super glue! Spin that ferrule in the glue as i press it back to the hozzle position!! And so far have not had any recurrence of creep!
@rogjack61128 ай бұрын
Neat trick with microfiber cloth to create heat spinning. Wow 60 sec. And done thanks!
@chrisb94786 ай бұрын
Awesome, thanks for this video. I used a heat gun on low to warm it up & 5 min epoxy. 👍🏻
@joeflorence9383 жыл бұрын
I tried your idea of using air to install grips. It was very smooth. Thanks you
@kjj25503 жыл бұрын
Unbelievable it’s worked like magic thank you very much
@howieg69982 жыл бұрын
Awesome timing, after looking at my clubs today I noticed 7 of my 13 clubs (excluding putter) have creeping ferrules....New grips for 3 and 7 ferrules to be re-attached....time to get things ready for this coming summer.
@wisconsinlife39713 жыл бұрын
Bought Taylormade M4 irons 2 years ago from golf galaxy.. this started happening after year one.. brought em back and they blamed it on poor epoxy at the factory and wouldn’t fix them.. called Taylormade and no help either.. I will try this myself.. new subscriber as well!
@ItsBucky982 жыл бұрын
Former Golf Galaxy employee of two years here. We used to fix this kind of thing multiple times weekly. Makes me mad to hear they weren’t more help, and it sounds like the store near me has gone downhill drastically as well. Used to work at GG, now I refuse to even shop there.
@wisconsinlife39712 жыл бұрын
@@ItsBucky98 only thing I can figure is I bought them in Florida and brought them into a GG in Wisc.. I had all the receipts of the purchase… I recently bought ping 425 irons, received them scratched, Ping replaced them no questions asked.. should’ve stayed with Ping before buying the TM’s.. lesson learned..
@MVB939 Жыл бұрын
i have some m2s and 2 have done that and one flew off.
@Oscar999294 ай бұрын
I had the same problem back when I got custom fit for my Rocketblade irons. Guess what - hitting Titleist now. Should have fixed them!
@mikereling60453 жыл бұрын
OEM's slapping crap together and out the door as fast as possible! When I assemble clubs I abrade the inside of the ferrule and epoxy them onto the shafts before I add the quick center for the heads. I have NEVER had a ferrule move on any of my builds.
@redhed97763 жыл бұрын
my 8i had a creeping ferrule before you fixed it !! Great video tip....
@BourneAccident Жыл бұрын
I stopped using ferrules on my irons years ago. So easy and quick to reshaft. Much cleaner look just like the old Pings.
@Frazer203 жыл бұрын
Little trick I use is to heat the kettle up and use the steam to loosen the ferrule fork adjustments. Works a treat
@_1ben2 жыл бұрын
Smart I will try it
@dukejet6997 Жыл бұрын
3 iron fixed😊 Thanks for posting this one
@haakonstorhaug16063 жыл бұрын
Great video and tip! I tried it and it worked perfectly on a pitching wedge where the ferrule had been creeping up the shaft for a long time. And just like that it was fixed.
@okolemahuАй бұрын
Excellent lesson!
@thenovicenoisemaker Жыл бұрын
You can also boil the kettle and put the ferrule over the steam as it boils. This also loosens the ferrule
@Oscar999294 ай бұрын
Thanks dude! That’s exactly what I needed to know!
@riffybeats2 жыл бұрын
brand new callaway apex pro 21 - 3 weeks in...after my 4 iron face caved in. it better be just the FERRULE!
@dolantwins101_x55 ай бұрын
Great video. How about tapered (Callaway) ferrules? Thanks
@lacabala313 жыл бұрын
Nice video! I have put 2 ferrules in their place right now. Easy trick.
@themaninthesuitcase2 жыл бұрын
Managed to get it moving a little and went to move it back to get some glue and it shot up nearly an inch. Looks like I'll need to go for the padded pliers approach!
@EFGMC2 жыл бұрын
It shouldn't move back by itself unless you are swinging the club. Is it a collared ferrule?
@themaninthesuitcase2 жыл бұрын
@@EFGMC I heated it under water to loosen it and that worked and it slid back to the head. I went to move it a little for some room for glue and it shot back about 20mm and jammed solid. I went again with pliers wrapped in foam and it was so stuck the plastic just distorted! Never mind, it’s only a £30 adams but still annoying. Though does give me an excuse to go browsing the used dealers.
@asmrtalkinganimalshypnotiz32393 жыл бұрын
Got to fix a couple of my clubs now. thanks!
@mikewilliams14793 жыл бұрын
You just saved my lob wedge..... sorta. Thanks for the video AJ. Can do one on saving those expensive ferrules too please?
@AndyS-i1uАй бұрын
Absolutely awesome!
@aldorebanal92403 жыл бұрын
This video was perfect timing. I just noticed one of my wedges that I keep in the back of my car for quick trips to the practice area has a separated ferrule. i thought I would need to remove the shaft to replace. I'm going to give your tip a try. Thanks.
@brettsiegle91633 жыл бұрын
Thank you! This is something that has been driving me nuts 😅
@Fat40YearOldGolfer82 Жыл бұрын
This worked perfectly. Thanks
@wadepatton24332 жыл бұрын
JB Quick is black and most likely what I'll use. I fixed a two-stroke engine case (critical surface) with normal JBweld. The ferrules bugging me most are fitted poorly to gorgeous heads and gleaming shafts with good stickers and grips. I think I'll reshape them before I slide 'em back down to the hosel. I still wonder what led to new looking heads getting the shafts replaced because they match perfectly, just the ferrules weren't done right. Thanks.
@JSBautomotive Жыл бұрын
Excellent video my man. Great repair
@davidgent1883 жыл бұрын
Thanks AJ… I’ve got a couple of these that need doing on my old set… 👍
@MrgnFlnn67 Жыл бұрын
Totally worked! Thanks!!
@dakoppel3 жыл бұрын
Thanks AJ! I have a ferrule that moved after shipping my clubs on my Mavrik driver. Can I assume the same process for graphite shafted Drivers?
@EFGMC3 жыл бұрын
Yep. Just be careful with the graphite if you use a knife to remove old residue.
@Paul-viking2 жыл бұрын
Hair dryer or heat gun (on lowest setting) also work well to soften ferrule.
@billmalec3 жыл бұрын
Have a bunch loose. Thanks AJ.
@TheRea10GG Жыл бұрын
What about on a driver - specifically a callaway driver - the ferrule has a collar that goes into the driver adapter - should the collared ferrule be easily slipped back in ?
@EFGMC Жыл бұрын
Same deal. Collar ferrule is no different. In fact a collared ferrule is more likely to fail and start to creep.
@Lantheus10 ай бұрын
I have a set of PXG 0311 XP Gen 3 irons that have this issue. Will it work with those or puny irons that have that different ferrule? If not is there a way to fix those?
@EFGMC10 ай бұрын
You can try but both PXG and Ping have a design flaw which makes this happen all the time. You may or may not be able to get it back down flush depending on how the ferrule collar broke apart.
@MarvinofMars3 жыл бұрын
In the UK & Ireland we have a Polyethene sealant adhesive, which ideal for re-setting ferrules, full mastic size tube for £6 -10 once cured very strong and flexible, also a German house hold glue UHU brilliant too used wildly in archery, strong clear and flexible.
@jamesnelson58852 жыл бұрын
the UHU is that the yellow tube mate when comes out tube looks quite rubbery cheers
@andyspey66072 жыл бұрын
hi, how do you fix moved ferrule on a callaway shaft adjustable adapter , mine has moved up un my callaway b21. t
@EFGMC2 жыл бұрын
Adapter ferrule is the same as any ferrule, just on an adapter, and usually has a collar. Same process works.
@andyspey66072 жыл бұрын
@@EFGMC , I’ve tried getting it back in but won’t move , looks like I ll have to get the experts to fix , thanks
@EFGMC2 жыл бұрын
@@andyspey6607 You can try and use some silicone covered pliers if you have them to try and move it after running under the hot water. Other thing to make sure of is that it's not a case of the adapter being loose instead of the ferrule.
@christopherdyer18622 жыл бұрын
Great tip AJ. THANKS
@mattrichards30703 жыл бұрын
Seriously good video, thank you. I’ve just had a ferrule crack, are you planning on doing any videos showing how to remove and re-install club heads. Thanks again 🙌🏻
@EFGMC3 жыл бұрын
This video covers removing and re epoxying a loose head but the steps will be similar. Also can find numerous videos I did on club assembly and ferrule finishing on my channel if you need that info in more depth. kzbin.info/www/bejne/mpavd3qCbradmsU
@mattrichards30703 жыл бұрын
@@EFGMC sorry I literally found it as soon as I ended that video. Thanks. Think I might try a fancy ferrule while I’m at it! Wish me luck 😂
@Rob-Oh3 жыл бұрын
Any recommendations on replacing sole plugs on callaway irons? (not bore thru) And where to get them? Thanks!
@EFGMC3 жыл бұрын
You can buy shaft pins for steel or graphite shafts that can be used as a sole plug for those older Callaway irons post bore thru design. Probably want the steel ones (wider diameter). Can find them on Golfworks, Mitchell Golf, Billy Bobs to name a few.
@shanecash6284 Жыл бұрын
Thank you so much for the info
@billfleming43703 жыл бұрын
Great video, would it be the same process for a loose ferrule on a driver adapter? I.e. the ferrule on my Titleist driver is always slipping down. Cheers
@EFGMC3 жыл бұрын
Same deal. Just be careful working around the graphite with any heat or utility knife.
@CW_GOLF_3 жыл бұрын
Wicked, now I can sort my son's Ping iron's
@craigbillups992610 ай бұрын
Hi, I used this technique when changing shafts in my irons. However the ferrules are now very loose. They have fixed in place when reshafted but there is a small gap at the shaft end of the ferrules, like they were too big. Any advice? Thanks
@EFGMC10 ай бұрын
You can't move them?
@craigbillups992610 ай бұрын
When reshafted the ferrules are effectively too big at the shaft end
@EFGMC10 ай бұрын
@@craigbillups9926 Sounds like you need to get a good amount of epoxy under them or cut bait and redo the assembly with new ferrules.
@matts.6898 ай бұрын
Very helpful. Thank you.
@illskillz0510 ай бұрын
Do I need to glue it down? Or if it creeps up again can I just push it back down ?
@EFGMC10 ай бұрын
You can keep pushing it down but the epoxy will hold it down long term.
@bradolson35102 жыл бұрын
Nice job dude
@Skeemaster3 жыл бұрын
Nice.... quick and easy .. thank you!
@arvinddas68033 жыл бұрын
Can u explain whats a low spin driver head or 3 wood head. When u say spin its the vertical spin or side spin .
@EFGMC3 жыл бұрын
When they say low spin, it's alway talking backspin or vertical. Usually this is related to the center of gravity location.
@geoffroydardenne83682 жыл бұрын
Thanks a lot !!! Great video !
@markushayes3 жыл бұрын
This work for the slim ferrule sleeve on Taylormade driver adapters?
@EFGMC3 жыл бұрын
Yes. Same deal with graphite shafts. Those adapter ferrules are usually pretty easy to move. Do make sure that it's in fact the ferrule and not the adapter itself, especially if you have had the club reshafted. Those adapters can often have bonding issues if not prepped correctly.
@jimb6017 Жыл бұрын
This work for graphite, shafts to?
@EFGMC Жыл бұрын
Yes, but the ferrules are usually harder to slide on graphite shafts so might need some silicone coated pliers to move it.
@adrianlawson9534 ай бұрын
Solid. Appreciate brother
@charlesbartholomew29103 жыл бұрын
AJ, How about a metal wood with graphite shaft? The ferrule has crept up a bit and is not moving. The head appears solidly attached with no shaft movement when attempting the twist test. Hot water did help to move the ferrule. Ferrule is collared type. Any recommendations? Thanks!
@EFGMC3 жыл бұрын
Same steps work for graphite. Just want to be careful if you are removing any residue with a knife against the graphite. The collar makes no difference, epoxy will get into the spaces either way. Only trick with graphite is sometimes you might need more heat to soften the ferrule more because the paint layers on graphite can make the shaft diameter a little bigger.
@charlesbartholomew29103 жыл бұрын
@@EFGMC Thanks for the help AJ! Much appreciated/1
@n2golf9893 жыл бұрын
Great content!!! What is a fair price to have seven irons restarted?
@robwheeler52322 жыл бұрын
Greetings MOBILECLUBMAKER, I am an avid golfer and my occupation is greenskeeping. I am switching over to be a golf club technician. I was wondering if you could help me out with some of the basics.
@EFGMC2 жыл бұрын
Planning on running club building classes once I open the doors on the new shop.
@Paul-cm7ie Жыл бұрын
Good video. Thanks
@TreyWK3 жыл бұрын
Can you do the same thing for a driver
@EFGMC3 жыл бұрын
Yes, works for any club. Graphite shafts can sometimes require a bit more work to move the ferrule but same process.
@LJen-hb8rm2 жыл бұрын
this worked for me.
@vikrampitre23432 жыл бұрын
Super practical 👏
@Pragmatic__ Жыл бұрын
Saved me a slight panic attack...had a 2nd hand set come through today and the 7 iron has the ferrule slipping a bit, I was worried I'd gotten shafted (pun intended)...now I know its a simple fix and an easy fix. On a separate note I realize this isn't a new video and you might have adjusted already but I'd heavily recommend you edit your audio to mono as I suspect you've got a stereo mic hooked into your shirt which means your voice is mainly coming through the left channel on headphones or stereo speakers...mind you I spend alot of time with audio so your usual non nitpicking viewers probably aren't bothered at all but the small things can make a difference in audio and video, just like in golf. Cheers
@matopo2 жыл бұрын
Perfect video for me
@dennisdawe2177 Жыл бұрын
I tried the hot water and could not get the ferel to move. Any other suggestions.
@EFGMC Жыл бұрын
First make sure that it is in fact the ferrule creeping and not the head coming loose. Assuming that's not the issue, get some silicone coated pliers or wrap the jaws with some duct tape and see if you can twist it loose with those after doing the hot water soak.
@dennisdawe2177 Жыл бұрын
@@EFGMC They are Taylormade M4, head does not appear to be loose. Tried your suggestion still no luck. Will using more heat,something hotter than tap water work or will that heat up the hozel too much.
@EFGMC Жыл бұрын
@@dennisdawe2177 Problem is you will melt or deform the ferrule if you use too much heat. Might need to take is somewhere if it still won't move.
@PGAPotato3 жыл бұрын
How could I remove stability tour putting shaft graphics? acetone?
@EFGMC3 жыл бұрын
Or paint stripper. I have also used Super Clean to remove paint fill from heads so I think that could work and maybe be less potent.
@bobkirkwood29922 жыл бұрын
Use denatured alcohol for epoxy clean up, not grip solvent or mineral spirits
@davidharrison2871Ай бұрын
super helpful :)
@jrm007 Жыл бұрын
Sometimes, especially on TaylorMade M models, it’s actually the head coming loose and not the ferrule slipping. I’ve had to re-glue many of the TM heads.
@AustinKimberlingPGM Жыл бұрын
Good video
@Beingmefromnowon8 ай бұрын
Thanks!
@Redeemed_Team Жыл бұрын
Thank you
@Livereater2 жыл бұрын
excellent!
@toku_gawa2 ай бұрын
They happened to my 1 year old Mizuno and the head came off and I couldn’t find it. That bad
@icefishing804 Жыл бұрын
Same clubs I got
@Otis7903 жыл бұрын
Stick the ferrule in the end of a shaft caul tighten gently in a vise and twist gently. Too old to run to a sink . And yes not everyone has a vice and shaft cauls . I had to do 37 a while back . Reselling old iron sets .
@johnpeterson98433 жыл бұрын
Great content...where are you located?
@EFGMC3 жыл бұрын
ATL
@arnoldlunsford98723 жыл бұрын
Thanks.
@forrestmitchell03 жыл бұрын
I had the ferrule on my 7 iron come loose today… how’d you know?! 👀
@EFGMC3 жыл бұрын
Serendipity!
@stevenburton79227 ай бұрын
Good stuff
@DaRealSlzyFrsh3 ай бұрын
Nice
@troyhyatt6923 Жыл бұрын
Amazing! That’s mate
@marklags2396 Жыл бұрын
Ahhh, first world problems. Thank God I still use my ping eye2's. No ferrule. Thanks though, I can fix my brothers clubs now.
@samking41792 жыл бұрын
and if the hot water trick doesn't work...?
@EFGMC2 жыл бұрын
Then it might be the head coming lose and moving in the opposite direction. Other option is get some rubber padded pliers and use those on the ferrule along with the hot water.
@samking41792 жыл бұрын
@@EFGMC Thanks! That's a good idea. I'll give it a try.
@BrianPex2 жыл бұрын
I’ll add to not keep clubs in super hot/cold vehicles. It will extend their life and this will be less likely.
@barneygermany5303 жыл бұрын
hot Water👌 sooo simple🤷🏻♂️
@vharrald3 жыл бұрын
Do you really need to have Ferrells on golf clubs?
@daleyvb5 ай бұрын
Didn't work on my ping g421 unfortunately
@EFGMC5 ай бұрын
Ping is a whole different set of issues.
@daleyvb5 ай бұрын
@@EFGMC oh no, what do I do now
@EFGMC5 ай бұрын
@@daleyvb You will either have to just play with it and hope the epoxy integrity of the head remains in tact or reshaft the club. I am guessing more than one of your clubs might be seeing this issue.
@daleyvb4 ай бұрын
@@EFGMC I only have one ping club 😅 if I read it correctly this is a common ling issue?
@EFGMC4 ай бұрын
@@daleyvb Yes
@danielx402 жыл бұрын
3:43. You’re welcome.
@MagpieGeordie3 жыл бұрын
👍
@stevengoen58199 ай бұрын
Imagine that, it works for everyone but me
@misteragony3 жыл бұрын
I tried this before but I fail to get the ferrule moving. Even after holding it under hot water for 10 minutes it doesn't budge :-(
@EFGMC3 жыл бұрын
You could also try wrapping the ferrule in wet paper towels and heating it with a heat gun. Have to be way more careful you don't melt, burn, or set fire to anything but the higher heat can sometimes do the trick. Can also try and use the hot water and then twist it with some pliers with silicon pads.
@misteragony3 жыл бұрын
@@EFGMC Thanks! I'll try that this weekend.
@dakoppel3 жыл бұрын
@@EFGMC I had the same problem with a ferrule on a Callaway Mavrik driver with the adjustable hosel. It is so fixed and unable to move I'm not sure if it is the hosel or the ferrule that actually moved? It seems the ferrule fits on the hosel and not the shaft?
@EFGMC3 жыл бұрын
@@dakoppel The collared ferrules used by Callaway can be tighter. Definitely make sure the adapter itself is secure. May need the padded pliers to move that ferrule assuming the adapter is solid.
@sms91066 ай бұрын
Superglue
@suziecorreia70648 ай бұрын
Hair dryer works wonders
@jts09 Жыл бұрын
The easiest way to slide the ferrule? I use a rubber shaft clamp. Just put the shaft clamp around the shaft above the ferrule and use it like a slide hammer to push the ferrule against the hosel after you apply the epoxy.
@digginestdog58248 ай бұрын
I have tried this countless times and it NEVER works. The ferrules are essentially locked in place, especially if it’s a graphite shaft.
@IntelliganceAiАй бұрын
The head fell off on my 7 iron today😂
@donbernhardt24243 жыл бұрын
Really love your content. One thing that I've noticed is that you're fairly static, so "mobile" clubmaker isn't quite accurate :D
@EFGMC3 жыл бұрын
Yeah, the name was originally going to be for a tour van style club building and repair setup but I ended up scrapping that idea and just keeping the name.
@TheMizzouman162 жыл бұрын
Technically to us he is mobile. If your on your phone and moving he's moving.
@markl4553 жыл бұрын
This happened one of my clubs. I used superglue and it’s been fine. Don’t know why you need to go through all this bs