This video shows you how to clean the Dyson V8 Absolute / Animal / Fluffy / Total Clean cordless vacuum cleaner. To order a new filter visit here :amzn.to/2zjKhVK
Пікірлер: 466
@2Pinkshadows6 жыл бұрын
No matter how many times I need to clean the dyson I always forget the correct order and have to watch your video again. It is very clear and easy to understand.
@tacygaede5771 Жыл бұрын
Me too;)
@guadalupecohen2103 Жыл бұрын
@@tacygaede5771 ❤❤Z
@bavarianautotech20965 ай бұрын
TRUE!!! ... me TOO!
@barryberko3 ай бұрын
Same 😊
@robertoappolon28233 ай бұрын
You’re not alone
@mjmallen8974 жыл бұрын
One of my favourite YT videos - clear, useful, no hype, not selling anything, no backing “music”. Just the facts.
@lords-electrical4 жыл бұрын
Glad you liked it!
@malaikasehar34542 ай бұрын
Amazing video sooo very helpful thankyouu
@Ryanstuff6 жыл бұрын
One little tip I like to give to Dyson owners is to empty the bin after each use, close the bin back up and then turn on the max power mode and pull the trigger for a few seconds. That way it uses the high power mode to extract more dirt into the bin at which point you can empty it again which keeps the entire machine cleaner in between each use.
@jrmint25 жыл бұрын
Can you make a video of this?
@rosie51525 жыл бұрын
@@jrmint2 yes pls do the video how to do pull the trigger?
@frankenfurter585 жыл бұрын
@@rosie5152 It's the same trigger you use to turn the vacuum on with.
@tamalibutvs4 жыл бұрын
Very helpfull, thnx! I also found out that after (the second time) you emptied the bin and the bin is still open, you can firmly 'tik' the flat bottom side of the dyson a few times on the edge of the trashcan. That way you can see a lot of very fine dust and dirt falling out of the 'center ring' (the ring in the middle of the bin, which is cleaned by a paint brush in this video). I hope that my explanation makes any sense🙈 I found myself having a hard time to translate this from Dutch to English haha😅
@emergingit4 жыл бұрын
@@jrmint2 You can't be serious..! FFS
@nicolewillems5601 Жыл бұрын
To be honest, I have had this vacuum cleaner for several years and really never cleaned like this. Today is the day. Thanks for this clear explanation.
@lords-electrical Жыл бұрын
Glad it was useful for you. Thanks for the feedback
@robbiephillips22264 ай бұрын
My V8 has been lying in the kitchen waiting to be reassembled after cleaning 3 weeks ago. I didn't want to face not being able to put it together again. THANK YOU, the best instructions I have come across for practical info. It reminded me that I am missing the larger rubber seal so now to hunt for that.
@lords-electrical4 ай бұрын
Glad the video was helpful for you, thanks for the feedback😀
@bb57nyc5 жыл бұрын
This is the second Dyson cordless for which you have walked me through the disassembly and cleaning. While Dyson succeeds with the suction part of their vacuums, they really fail on the design of the cheap plastic parts that all seem to be a little "fiddly." Thanks from New York City!
@stephenhensley5631 Жыл бұрын
Thank so much ! This fell apart in my hands and for hours my wife and I fought until we found your video . My marriage is saved, thanks to you !
@lords-electrical Жыл бұрын
That's great to hear 😀
@jamnmikefx6 жыл бұрын
When I got my V8 I noticed it was picking up less and less dirt. Followed this cleaning process and it’s good as new. Thanks
@deenasteinberg98002 жыл бұрын
Great video. Especially appreciated keeping the camera on the parts not yourself as many do! And getting right to the point without useless small talk first.
@htpcnz73784 жыл бұрын
I know you said you don't recommend it, but I always wash the cyclone chambers. Amount of gunk that comes out pretty much speaks for itself and no nasty smells after that. However I do let it dry for a at least 3-4days to a week and keep it somewhere warm to dry up and turn it around etc to ensure it is fully dry. Done it tons of times on my V8 and so far so good :).
@lords-electrical4 жыл бұрын
Thats great well done.
@tessthef1rst Жыл бұрын
I have done the same too!
@tacygaede5771 Жыл бұрын
Good to know. I freaked out as I cleaned all of it except the handle portion. I took out my Dyson blow dryer and blew it dry as I thought I'd done the wrong thing!
@ravingmavis580118 сағат бұрын
I’ve Put bits in car when the weather is hot and left for the week - they dried out really well, I’ve cleaned the cyclone unit and all the heads as well. Thanks for the tip. So much debris inside Like a new vacuum now really pleased thanks
@cherryclan17 жыл бұрын
Absolute best video for cleaning the V8 and no annoying music. I've only had my Dyson for one day and have already had to refer to this a couple times. Thank you for posting.
@AK-jk7co3 жыл бұрын
I know this is an old video, but this was SO SO helpful that I had to comment a thank you! My ADHD brain really doesn't do well with directions but this was easy peasy!
@lords-electrical3 жыл бұрын
Great to hear, and glad it was helpful for you
@zubedabegum73857 жыл бұрын
I had a moment of panic after dismantling my V8, I couldn't piece it back together! thanks to this video it's back in one piece, yay. Thank you:)
@Ayram94 жыл бұрын
Same! 😆
@lenarrigo87132 жыл бұрын
I have had a V8 for 5 years or so and it works great. The one thing I do differently is that I use my air compressor to blow all the dirt out of the unit once dismantled. I also have a V6 and just purchased the Outsize Absolute plus. I highly recommend the air compressor approach in lieu of the paint brush method.
@kalle77415 ай бұрын
The avarage housewife does not have an air compressor. That´s the problem.
@magicpacket5 жыл бұрын
Thanks for the video. For cleaning the metal screen and cyclone air piece (6:17), if you have an air compressor it can do wonders for getting fine dust out (outside!). This is especially helpful if you've been using the vacuum on drywall or plaster dust, and it's amazing how much gets trapped in this piece.
@deenasteinberg98002 жыл бұрын
can i use the compressor i fill tires with to do this?
@magicpacket2 жыл бұрын
@@deenasteinberg9800 possibly. If it has a tank and you can use a spray nozzle (instead of a tire valve adapter) then it should be doable. If no tank and low flow rate (like a tire pump) then no.
@David-And-A-Half7 ай бұрын
Personally I use a hair dryer with a cold function. My compressor or even a can of compressed air will do a better, more focused job but my hair dryer is easier to setup and does a good enough job.
@carolejohnstone52315 жыл бұрын
Fantastic video, I take this out every time I clean my Dyson, makes it so easy. Well done
@sutchristine6 жыл бұрын
Superb video. Just spent ages trying to decipher the the diagrams in my instruction manual....but then I found YOU. Thank you so much ☺
@jackierobbins65825 жыл бұрын
Thank you for the step-by-step cleaning procedure, the filters are drying and I am feeling more confident about maintaining the vacuum!
@pattimartin7250 Жыл бұрын
I just purchased one. Crazy!! No instructions in the box!
@akshayjagtap6638 Жыл бұрын
thanks a lot, your video helped me clean my dyson.. I was using it since 2 years and had never cleaned it. Lately it started giving foul odor and I was thinking of replacing it with newer version. After cleaning it like you instructed, the odor is gone and the suction has improved. Thank you!
@lords-electrical Жыл бұрын
No problem, glad it was useful for you
@frankenfurter585 жыл бұрын
Tip: for easier cleaning of "bits", try those cans of air used for computer parts. Works like a charm.
@emergingit4 жыл бұрын
Great idea..!
@umamichefd4 жыл бұрын
I used my air compressor with a blower. All kinds of crap flew out of there lol
@shmolouis6 жыл бұрын
Just adding to the other users who found this helpful. Note I did use water to clean my filters and had to wait quite a bit for it to dry out. In my case I'd vacuumed ditumaceous earth that fell on the floor and that really clogged all filters. Even with the water and some anxious moments, it did work after a long period of drying and putting on max for a 30 seconds to force the filtration (after having been as dry as I could get it).
@colourwolf13 жыл бұрын
although this is four years after your video but thank you! you have saved me!
@barrymedwin71979 ай бұрын
Thanks for the information on how to clean Dyson V8. One extra tip, is to unclipped the blue filter and wash the inside of the filter. There will be dirt and dust inside the blue filter.
@lords-electrical9 ай бұрын
I agree that this can help, thanks for the great tip 👍
@jameslow57384 жыл бұрын
Hey thanks for uploading this. There’s one thing I need to point out. The transparent bin may look like just a plastic part but it has electronics in the grey plastic and water can get inside if you rinse it. It’s the circuit that gives power to the motor of the extension head so be careful. The cyclone is the one that can be rinsed but difficult to dry.
@doughenderson60892 жыл бұрын
I know this is an old comment but I did rinse this part and I'm concerned I may have gotten water on the inside or near the electronics. I'm letting it dry overnight, but are there any other precautions I should take so this doesn't ruin the vacuum when I reattach?
@atxbee Жыл бұрын
@@doughenderson6089what ended up happening lmao?
@doughenderson6089 Жыл бұрын
@@atxbee let it dry thoroughly overnight and it worked fine the next day. We still have the vacuum and use it almost daily, so I'd say it ended up fine!
@helenviran90075 жыл бұрын
On the one hand, I have just spent eight minutes of my life watching a video on how to clean a vacuum cleaner. Eight minutes I will never get back. On the other hand, I now know how to clean my vacuum cleaner and I will never have to watch it again. So thank you (I think)
@schmoopyvonboopy49592 жыл бұрын
Thank you so much! Your video addresses everything I needed to clean with my V8.
@irishstew58675 жыл бұрын
1st: Thank you so much for presenting this video on-line. I do not recall any directions from Dyson, in their booklet that came with the machine. The video is very professional and to the point. 2nd: I am not making this comment concerning Dan's comment, so please do not misunderstand me. Dan said, "Kind of stupid that Dyson designed this so you can't clean the most dirty part of the vacuum, the part above the canister." I AGREE, 100%! Every Fall, (back in the day), when the weather cooled, I would take all seven of my $30.00 room-floor-fans and place them in my driveway. I had a hot water valve that I rigged up so that I could have any temp of water going into a garden hose. I would set the temp around 190F (like a cup of coffee) and hose all over the fans, blades, motor, cords, etc., to make sure I got the dust out. Some times, I would have to do a small disassembly of the blade guard, and use a towel to clean the grit out. I then left them out overnight (on the back deck so nobody could see/steal them). I then took them inside, where they stayed in a storage room for six months, before I pulled them out to use again. Now, I never knew how long it took for everything to dry, and should anything rust, I could repair/replace as needed (not much money). Nothing ever rusted and they all worked as expected for years (my nephew wanted them when I moved and I never heard about them since. I never shared my story about them, to him, either). Now, if I could find a V8 Dyson at a yard sale or flea market at a very, very low price, I would do the same thing. But, I am an old school guy. So, I would take it apart, hose out that part above the cannister, keep it in a warm place for three months, and then test it, to see if it worked (I'd also be concerned with any copper wires or lubrication points, and if it worked, I would continue with the hosing and drying for two months, then one month, and then stop at two weeks. Two weeks, and if it still worked, I would be satisfied. I am just sharing my thoughts, here. Remember, these machines originally cost around $800.00. So I would not try this on my main vacuum. Also remember, what would happen if it was wet! Just sharing my life experiences and my thoughts. After all, I really love my Dyson. Why? Because it really, truly, sucks!
@F_K3NT_D5 жыл бұрын
Irish Stew That would be nice but living in the Houston Texas area the entire units would be covered in rust the next day, lol.
@qasimmir71172 жыл бұрын
You don’t need to clean ‘the part above the canister.’
@MrPoppies19763 ай бұрын
Bro I know this is an old video but you really helped me out today. I was actually gonna buy a new one because mine was so beat up. I had no idea it came apart like that. Game changer. It works like new. Liked and subscribed bro. You made a difference today.
@lords-electrical3 ай бұрын
That's great to hear it helped you. Thanks for the kind feedback
@larrybeavens75807 жыл бұрын
Nice video; I love my V8 Animal and now I know how to dismantle and clean it. Thanks for sharing!
@wusmartie7 жыл бұрын
Larry Beavens oa
@lawrduong7 жыл бұрын
Larry Beavens and
@rainynate32442 жыл бұрын
Thank you so much you have just literally made my day I thought it was gone for good I didn't realise that you can get into it so much so you can give it a good clean I'm going to watch u again tomorrow and I'm going to give it a good clean for the new year it pays at the end of the day
@lords-electrical2 жыл бұрын
Great to hear that, thanks very much for the feedback
@genggeng69 Жыл бұрын
Thank you so much for this simple and extremely helpful video :)
@tankminder3 жыл бұрын
I spent at least 20 minutes trying to figure out what to do between 2:57 and 3:00 - thank you!!!!
@huseyinalupveren37683 жыл бұрын
lol same
@ronarkley8824 ай бұрын
@@huseyinalupveren3768 haha, so wasn't jus me looking at waiting for something to happen
@janiceberger48516 жыл бұрын
You have the best Dyson videos, anytime I forget or don't know how to clean or dismantle my vacuum, I always come looking for your videos!! Thank You!
@McDee_Rick6 жыл бұрын
Hi there, Nice how to video Don't know if important, but the manual says to clean with cold water.🤔 To dismount the accessories, the screws are designed to open with a simple coin😉 Just wanted to share, hope you don't mind
@Battlefieldd35 жыл бұрын
And to let dry for 24 hours
@bavarianautotech20965 ай бұрын
The very BEST tutorial for cleaning a Dyson Vac! Only additional tip of assistance? ... is a small "pancake " air compressor and a dust mask make very quick and complete work of what a brush can do for you! 😊
@lords-electrical5 ай бұрын
Yes thats true. Thanks for the great feedback. 👍
@neilwilkins90022 жыл бұрын
just had mum call and say her v8 wasn't working....thanks for the info I'm now subscribed
@TheRandomrogue4 жыл бұрын
Thank you! Your video is very comprehensive but easy to follow. 🙂
@jackieb72862 жыл бұрын
Great video. Dissasembled and cleaned while I was waiting for the new battery to charge🙂
@bb57nyc6 жыл бұрын
I have repurposed a cat's toothbrush (which he refused to use) to reach inside and clean out the middle. It pulled out a lot of fine dirt. Thanks for a great video. Also thanks to your similar video on cleaning the V6, I was able to get a pretty good price for it on E-bay when I graduated to the V8.
@matejkamenik50283 ай бұрын
7 years later, still helps!! Thanks a lot :-)
@lords-electrical3 ай бұрын
Yes, even though some of the cleaning videos are several years old, they are still relevant and hopefully helping people to maintain and keep the older Dyson vacuums going.
@taposherabeya78576 жыл бұрын
Thank you ever so much for this video. I just cleaned my dyson it was so dirty. Not even dyson have a video as useful as this. Many thanks again
@meg38396 жыл бұрын
Great video. Thanks! A straw cleaning brush kit (reusable straws) might work well for that tight space inside the motor.
@patfilippelli21912 күн бұрын
Thank you for an excellent video. Clear spoken step by step instructions are an absolute stand out!
@lords-electricalКүн бұрын
Glad the video was helpful for you. Thanks for the great feedback 😊
@anndoig24596 жыл бұрын
Thankyou - have been guided by your video to clean my wonderful Dyson stick vac - todays cleaning now completed and am just waiting for the filter to dry out before getting into vaccuming once again...cheers and again thanks.
@may-jennifermccullagh89386 жыл бұрын
Just did this, vac is like new, smells great with the use of a water free air wick spray 'Pure', used an artist paint brush for all the dirt removal and as used no water I could put it back together straight away. 😊
@leesnoderly63546 жыл бұрын
Dyson v8 cleaning
@MrsLLWB Жыл бұрын
Thank you so much for this video! I never knew how to take my vacuum apart! I misplaced the manual!!
@Derekmua2 жыл бұрын
Super helpful!!! I've been thinking how to clean it and this makes total sense
@BenAptus4 жыл бұрын
Still using this video once a week to clean my vacuum. Best vacuum - and best video. Thanks.
@lords-electrical4 жыл бұрын
Glad it helped!
@berthaday16 жыл бұрын
Excellent instructions on cleaning and reassembly! I was having problems getting it back together. Thank you so much!
@eugeniahobbs412 жыл бұрын
Agree
@mikel14258 ай бұрын
My mistake was not doing this sooner! It started stuttering, similar to when it's sucking on a solid surface so I found this video and did it. Didn't notice that it had lost sucking power - now it's louder and def improved sucking power. Dried it for around 24 hours but also live in a dry climate.
@lords-electrical8 ай бұрын
This is great to hear the video was useful for you.
@kathrynaltergott40393 жыл бұрын
Great job explaining how to do this I watched another one and she was wrong and it wouldn’t come apart. I did buy a few replacement filters when I purchased my Dyson. I had to vacuum spilled baking soda so everything was a mess. Thanks to you all is clean now and drying outside.
@David-And-A-Half7 ай бұрын
If you want to take it a step further and have a hair dryer with a cold mode (or an air compressor) you can give everything a quick blast of air on a regular basis to stop dust and grime from caking up inside. Just make sure you only use the cold mode so you don't accidentally toast any internal components.
@zerogoki406 жыл бұрын
Thank you, even more useful than Dyson's support videos!
@martineleven81796 жыл бұрын
I use the air compressor and blow it through to rid dust, takes 1 minute. I find it has to be done quite regularly. Filters have to be washed regularly aswell.
@mavic61555 жыл бұрын
Yes, when the Dyson switches from on to off a few times after each other, it's time to clean. After cleaning, it works again.
@Flashbax7 жыл бұрын
7:25 I recommend washing this out with soapy warm water. I do this on all my dyson models. Shake out any left over water and leave it to dry out. I also blow out the motor 2:25 with air which stores a lot of dust
@Ayram94 жыл бұрын
I have a question about blowing out the motor with air: wouldn't that risk harming the motor? It seems you'd be blowing dust into the motor which can't be good. What kind if tiny device sucks out the dust from small spaces rather than blowing it out?
@Flashbax4 жыл бұрын
@@Ayram9 no it's just taking off the back filter and turning it on which blows the air and dust out freely.
@srabchun6 жыл бұрын
Thank you my friend for taking the time to make this helpful video.
@patmcgaw62666 жыл бұрын
Thank you for these videos I am always scared to dismantle new items, but if I get stuck, I can come back to this 😊 to this
@damarista_23 Жыл бұрын
Thank you 👏🏼 I learn how to clean it properly 👌🏼🌚
@twominutetips7 жыл бұрын
Fabulous video - very well done. I just got my Animal and very happy to see how to clean it properly. Thank you.
@lostintheelectricalaisle53186 жыл бұрын
Shouldn't you be doing this outdoors or near at least a strong HEPA? I guess it depends what you suck up but with using mine in an are a solder often, I'd be getting a nice lead dusting everywhere. I just use computer duster or an air compressor to get the dust out, which is located in the garage and has an air filter but a fan blowing out from where you're working is a good enough solution. Have to clean the main cyclone area every week or so, same with the dyson cinetic big ball. Constant caking of dust. No idea why they would suggest the V8 and cinetic are more hygenic to empty, my old dysons (original root 6, first handheld, and dc48 animal) didn't have this level of dust caking and they are lower powered. Off topic but the cinetic big ball comes with a stupidly short hose that makes it almost unusable for anything above shoulder height as you run out of hose. Luckily support sent me pretty much every accessory for free along with a 2nd hose for both the cinetic big ball (actually 2 hoses, and it came with one) so I was able to combine 2 hoses for the big ball together after taking off the part that clips to the tank on one end and the rotating part where the hose attaches to the accessory. Connect those two parts together and instantly it becomes 100x more useful. The left over socket where accessories from the big ball attached that was removed for the double hose was then press fit onto the extra V8 hose and now it can use any accessory (v8 hose is smaller diameter.) Had no isses with these modifications and using the bigger tools on the v8 is great! Should be an option in the store. Customer Service sure gives away accessories like crazy if not satisfied with the product. Hundreds of dollars worth of them and parts (including 2nd v8 canister) and I didn't ask for any of them. Pays to buy from Dyson direct.
@patmcgaw62666 жыл бұрын
Thanks for this, how often do you recommend cleaning
@ginyamaguchi14217 жыл бұрын
Thank you so much! We used our Dyson to catch a roach one night and it got stuck inside the filter column. Thanks to you we managed to get rid of it. 😉
@j.ballsdeep4206 жыл бұрын
You can afford a Dyson but you have roaches. Weird
@dh-13994 жыл бұрын
I had an issue with the cyclone assembly (yeah I looked it up) no longer freely sliding in the bin after cleaning. I'm guessing the bin gasket and the silver metal mesh are both lightly coated with a lubricate from the factory which cleaning removed. I brushed some wd-40 on both with a tissue. Problem solved. Great video. Thanks
@kathrynaltergott40393 жыл бұрын
One more thing I add a few of those in washer scent beads to my bin and when I vacuum a nice scent comes out.
@lords-electrical3 жыл бұрын
Great tip! Thanks for the feedback
@KENICUSONE Жыл бұрын
Thank you!!!! Cleaned my cleaner with no problem after watching😊😊😊😊😊😊
@lords-electrical Жыл бұрын
Great to hear the video was useful for you.
@KevinCrona Жыл бұрын
Great video! Both me and my brother use it every time it's time to clean the Dyson 😄
@mariongremillion370810 ай бұрын
Love this vacuum cleaner. Best purchase that I have made
@lidiag8610 Жыл бұрын
Glad I found this! Very helpful even after all this time
@thelmah052 жыл бұрын
Compressed canned air is also good to get into the little nooks and crannies to get all the dust out.
@penelopehunt23714 жыл бұрын
Only a Brit would do this in shirtsleeves 🤣🤣. Thanks mate ! Very good video
@mysticveile3 жыл бұрын
I'm ashamed to say that I've neglected my vacuum. I want to remedy that. Thank you for this video, I found it immensely helpful. I realise it was posted a long time ago, but I'm going to go ahead and ask: can I dry the washed parts in the sun, or would that warp the foamy bits?
@lords-electrical3 жыл бұрын
I wouldn't recommend drying them in the sun. Just leave them to dry by your sink for 24 hours to make sure they are completely dry.
@Juberri3 жыл бұрын
Funny how life is I use a ninfisk vacuum to clean my Dyson, well explained and clear video congrats
@bondjames70072 жыл бұрын
Brilliant….thank you - I never knew there were parts that could be separated to allow cleaning. 😀
@08daviep7 жыл бұрын
thank you for this video. it's much more helpful than the official Dyson videos
@dayanand11906 жыл бұрын
Thank you very much for this tutorial.
@ncontreras79782 жыл бұрын
definitely helps to do outside or ventilated area.
@antonyheath82275 жыл бұрын
Great for picking up small debris's and dust, but don't get anything wet in there. That makes it very difficult to clean and the machine starts to smell. But as a dry, quick run around it is very good.
@lucybreadncake2 жыл бұрын
Thank you! It works for my Costco version of Dyson.
@ArgoX20077 жыл бұрын
I recommend using a coin instead of a screwdriver to open those up... as you can clearly see in this video, the screwdriver warps the plastic.
@sakumong5 жыл бұрын
I used a coin and it warped the plastic too, they might want to consider changing the mechanism there.
@hard2bear31105 жыл бұрын
@@sakumong you can do it with your hands, just push down and twist. It's not that tight
@PVflying5 жыл бұрын
ArgoX2007 good tip, thanks
@laquangbinh4 жыл бұрын
Good suggestion. If you are from Australia, use the 10c coin, it fits perfectly and does not warps the plastic.
@hithereperson81374 жыл бұрын
I tried that and the fucking thing wouldn’t turn
@compagniepaprika19383 жыл бұрын
Very clear ! And what a nice voice you have ! Thank you !
@lords-electrical3 жыл бұрын
Thanks very much
@robertbarnier453 ай бұрын
Thanks. Very clear. Love Dyson. ❤
@rosepainter65726 жыл бұрын
Exceptionally easy to understand, and the video is thorough. I recommend this for anyone, especially someone who learns visually.
@imalibra208 ай бұрын
Thanks for this great video. Will be consulting it often!
@sheilataylor93333 жыл бұрын
Excellent video! Perfectly demonstrated - thank you so much! ***** 😊
@lords-electrical3 жыл бұрын
Glad it was helpful!
@scottyweimuller61527 жыл бұрын
I love my Dyson V8 Absolute, I have 1 for the house and 1 for the lake house and they make vacuuming a breeze
@alicehacker254 жыл бұрын
This is helpful thank you!
@ahmedassaad17 жыл бұрын
Thank you, very helpful and very nicely presented. keep up the good work.
@dianatownsend28597 жыл бұрын
Thanks for this video. I particularly like how to dismantle the inner core to clean...it has frustrated me not being able to remove the dust in this section...after time the build it gets smelly!
@diannamcconnachie44866 жыл бұрын
Diana Townsend Yes! For 4yrs, I have blowing out, outside!
@shawnal64576 жыл бұрын
Mine too. Wonder if it could be dismantled like V7.
@christophscheffler63646 жыл бұрын
Nice Video. Feeling like watching an old Bob Ross Video😋👍”Just slightly use your brush “
@lords-electrical6 жыл бұрын
Bob Ross, legend.
@rickw16384 жыл бұрын
Thanks - vacuum works like new again. Great vid and instructions
@violetagp59373 жыл бұрын
Thank you for this video from Spain
@lroberts41624 ай бұрын
Excellent video. Thank you
@jaymac19463 жыл бұрын
Great video. I’d use a coin instead of a screwdriver but they are in short supply these days!
@bimmermom3 жыл бұрын
This is great ... however I have a very hairy golden retriever an have lots of fur wrapped around the two little wheels .... I’m assuming I can only do what I’m doing ... cut the fur carefully and then pull the fur hard ... not all comes away but most ....I need to buy myself a cheap paintbrush to do a good job but paper towel worked for now ... thank you for this video
@RS-jz2yn6 ай бұрын
Excellent video thanks. Just finished doing this and it runs like new.
@lords-electrical6 ай бұрын
That's great to hear this was useful, thanks for the feedback.
@krio.6 жыл бұрын
Take Note: Operating Manual says to use COLD water, NOT warm water.
@kaumuditunuguntla58075 жыл бұрын
Exactly
@corbinangelo33594 жыл бұрын
My guess would be that with warm water, any glue in there may be at risk of dissolving.
@robinbeaumont27444 жыл бұрын
Wanted to comment this myself haha
@aideenlavin35462 жыл бұрын
Thanks very much. Mine had been badly neglected!
@molee26642 жыл бұрын
Just done all this - you made it so easy for me - thank you 😀
@SusanOdomHillsideАй бұрын
Thank you! This is a very helpful video
@lords-electricalАй бұрын
No problem, glad it was helpful for you.
@traffictraffic6 жыл бұрын
This is extremely helpful and well done thank you
@RicardoRodriguez-nf2iy2 ай бұрын
When the unit has not been cleaned/maintained in a long time, I suggest not to wash the fabric triangular/funnel shape filter as explained in the video. The reason for that is because the dirt is collected/trapped inside that filter. If the filter is washed without properly been clean from the inside, then there is a high risk of the dirt clogging in the filter. I suggest to first remove the filter's tap/lid/cover, then to vacuum the dirt inside the filter, and to use a brush to loose the dirt trapped inside. Only after that, the filter can be washed as shown in the video. Never to run water inside the filter as that will push the dirt further inside the filter causing a clogged filter.
@michellewainer74192 жыл бұрын
This video was awesome and perfect!! Thank you so much for this!