Рет қаралды 2,145
This video showcases all the built in features designed into this losi 22s drag chassis. taking a stock losi 22s, convert it to mid motor, front mount servo, floating body mount and more! designed to be an affordable conversion to make an already awesome for the value rtr drag car into something much more impressive! cheapest option of the conversion costs only $80 Canadian (around $60 usd) and some time with a 3D printer gets you more features found on many more expensive kits like the dr10m.
3D printed parts are designed to be robust and take a hit and keep on going. parts printed by me are from PETG filament, 3.2mm thick wall and 100% infill. you can print the parts in PLA/PLA+, ABS, PETG, Nylon or whatever filament you with to use.
kit options are:
$220 canadian: full carbon kit - carbon chassis, body mount and front body mount links. all 3d printed parts to built mid motor real street chassis, all needed hardware, bearings and tie rods for push rod suspension, usb with stl files to print your own spares
$155 canadian: full 6061 T6 Aluminum kit - aluminum chassis, body mount and front body mount links. all 3d printed parts to built mid motor real street chassis, all needed hardware, bearings and tie rods for push rod suspension, usb with stl files to print your own spares
$150 canadian: carbon only kit - carbon chassis, body mount and front body mount links. all needed hardware, bearings and tie rods for push rod suspension, usb with stl files to print your own parts and spares
$80 canadian: aluminum only kit - aluminum chassis, body mount and front body mount links. all needed hardware, bearings and tie rods for push rod suspension, usb with stl files to print your own parts and spares
Built in features:
springy front bumper
5 degree kick up
front mounted servo
dual bell crank steering to reduce bump steer
droop screws front and back
push rod suspension with adjustable geometry
front "sway bar"
floating front and rear body mounts
quick release battery hold down with battery placement adjustments
front perch for reciever
parallel front and rear arms/tie rods while chassis is 1/2 from the ground
adjustable anti-squat
optional wheelie bar mounting with single wheel carbon or aluminum flat wheelie bar