Losi dbxl 2.0 petrol WARNING

[@rickburnout666]

I had to fill a tank hole and just used a self tapping screw and PTFE tape it's still not leaking after 3 years on my 52cc weedwacker, I've never used a Losi. Great show

[@PerformanceFestiva]

Can't be too careful against fire. I've had a petrol fire in my race car shop and it was an absolute nightmare. I'm glad you noticed this and warned people. Totally not over reacting.

[@alexwest2180]

At first I was thinking it might be to vent the tank. I'd put a fitting on it with some coiled fuel line. Will still allow it to vent and help keep fuel from leaking out in hard acceleration and roll overs. We use the trick on a real drag car and doesn't leak. Hope that helps.

[@MrChrisdavie]

This video scrambled a business meeting and lessons were learned

[@rcshowoff5427]

Hello Kevin I have the same car and my gas tank also had a leak but the hole was not that big. I repaired it with a soldering gun with the spoon tip to plastic weld it.The repair did work and hasn't leaked at all sense melting it together.

[@muskokamike127]

I JUST said to plastic weld it. The spoon though is poly styrene, the better solution would be to use a laundry detergent bottle or something else made of polyethylene but if it works it works right?

[@muskokamike127]

@@Berm_Blaster ah I misunderstood.

[@toysforboysrc]

Heyyyy for the fuel tank hole, people should use GASKET MAKER for gas and oil. There are sealers for fuel applications.

[@lnskustoms6795]

Had to do the same thing with mine. It is thin there from the molding process. It is where the plastic runner meets the tank when it is made. With gas left inside it caused the tank to expand, it finds the weakest spot and will blow that hole open. I just put a small o right g on a screw and tighten it down hasn't leaked in months now.

[@muskokamike127]

Yeah those tanks are made via blow molding. They put a rough "tube" into the mold and inject hot air in and it expands to fill the hollow mold. That's the point where they hold the blank and inject the hot air. They usually twist the plastic and leave a blob over the injection point. Looks like there process was a failure. It's the same way they make gas cans and detergent bottles and all sorts of "containers". When I worked in the plastics industry I asked "why don't they just use the opening where the gas comes out or the vent"? Shut up and get back to work! lol

[@lnskustoms6795]

@@muskokamike127 yep was in the injection molding business for awhile dealing with the same crap as a machine setup tech

[@muskokamike127]

@@lnskustoms6795 Yeah, setup and monitoring is key. Seems they failed bigtime on the monitoring part if many people are experiencing the same issue. I do cnc work now and if I have to make more than one part, like dozens, I always verify that the 12th is the same as the first. Anything can happen to cause them to be off.

[@lnskustoms6795]

@@muskokamike127 yep run cnc lasers and mill,lathe now.

[@gabecurl8880]

I used a washer and super glue to secure the washer and used a screw larger then the hole and haven't leaked since. Just need to get a diff locker for center diff blew it apart last night lol

[@danielmurphy4023]

Hey Kev if it starts leaking again you can get a pressure fit Barb fitting in the hole and cap it off and that should work

[@mikewilliams5851]

Your channel is the best just started RC ing and you make it so fun great job Cheers.

[@chriscottell6854]

Its exactly what rc's r all bout. Fun n finding out how to take apart, fix n rebuild n get bk to driving flat out. 😁

[@No_Brake_Nation]

Just bought the same one a week ago!! going to put it on road hopefully tomorrow and rip it :) thanks for the videos always love them!!

[@cjchannel12RC]

I had looking into getting a DBXL 2.0 after my 5ive-T but these issues you found and it drove me away from getting one. To me Losi either need to recall these cars or discontinue these and bring back the TLR 5ive-B kit.

[@darkoneokc]

I think the safest thing to do would be to put a drain petcock on it. It would help drain the fuel when you finish each time.

[@brianlangford7278]

Kev look into JB weld products,great for field fixing also

[@raya4393]

I’m surprised you don’t have a Losi WRC Mini. Too bad they stopped producing them.

[@bigrig3135]

Do repairs for my lhs, have had 2 of these tanks with the hole and also the rubber mount inserts missing. Horizon knows and sent replacement tanks for both that are fine and also includes the rubber mounts.

[@hebertmarc1914]

i got the same problem i just used a plastic welding gun that work very well

[@maximus7714]

Same thing happened to my gas tank ! What could i replace it with ??

[@Skulldude69420]

I’m on my second losi tank. Both leak from the same hole

[@eddielane9569]

In America we have a product called JB Weld. It comes in various forms now when it use to come in just one. They have a kind that you squeeze out of the tube and it is in a two-part mix like your two-part epoxy you were using. They also have a two part putty type that has a center color and then the outer color is different and you cut the amount you need and you knead it together in your hands until it gets warm and well mixed then you apply it. It comes in a form for metals and other items and a new product they have had for a while is for Plastics that you cut what you need and also knead it together and apply it and then it dries really hard. You then sand it to your liking and if you like you can paint it. You've got to be careful with anything you use because you have to make sure that it will stand up to different kinds of fuel because some products will eat away pretty quickly While others may take a little longer. I hope you're fix did the trick. Maybe you should contact the company and tell them what you found and ask other people to do the same otherwise they will think it's just a one-off situation which it could be but this kind of thing as you know and have said will start fires and you could crank your machine up for the very first time and take off with it and watch it burn up because you didn't have a way to extinguish it at the time which it is a good idea if you're running lipos or frankly any kind of RC to have extinguishers handy just in case otherwise it could cause a fire in a field or any other place. The JB Weld by the way dries hard as Steel and I think it's a terrific product.

[@simpleweldingservices527]

I saw this video the next day I bought a DBXL with the same problem rc store is ordering me a new fuel tanks thanks for posting this video

[@noredcr]

yup, same problem. did the exact same thing to fix it yesterday.

[@andrewhannam2628]

Theres a hole in the gas tank dear kevin dear kevin a hole

[@andrewhannam2628]

Well fix it dear losi dear losi fix it

[@gordonendicott5114]

I never leave fuel in them and oil motor before storage

[@julianalford889]

Can you recommend a good upgrade steering servo for hpi savage x

[@unojonjero2415]

is the hole for a bleeding tap to empty the tank that wasn’t fitted by losi?

[@Metalingus777]

I’m willing to bet the hole was intended for a low mount fuel pickup on another model.

[@robertruiz5417]

Absolutely thought the same

[@johnscotto7803]

Hey Kevin you get the Traxxas XRT?

[@Chris-kk6ek]

I just bought this rc truck but I need a little help tuning it any suggestions

[@btmstwins]

Screw a fitting into it and put a piece of fuel line on it with a zip tie. If it’s a vent the tank will still vent.

[@alanmeyers3957]

It’s in the bottom of the tank and the caps are what is vented on these

[@mikewilliams5851]

Love the waffling 😂 good conversations

[@MehmetSutas]

Kev for failsafe on nitro vehicles you need to use a different receiver for dumborc. X6F receivers does bot support nitro rc. You need to use X6YC or X6YCG dumborc receiver for nitro models. They support failsafe on ch1 and ch2.

[@benjamin_luscombe]

always fun to chat about whats going on

[@simonastley8546]

Hi kev , what car would you recommend for a beginner Cheers mate Simon

[@dougcrysdale2045]

Mines an e,and doesn't seem to leak anything?!

[@maximus7714]

what 2 stroke oil do you use ? does it have to be full synthetic

[@ginabeltman2808]

kev are you going to get the new traxxas XRT

[@cliftonmanley3882]

When I walk to the shops. I usually take Gandalf the Pink Galah on my shoulder. It takes at least 30 minutes longer because people LOVE 💑 Gandalf the Pink Galah 💗 and want photos and to talk... So yeah it gets annoying... but it's also a lot of Fun. 👍

[@tylerm313]

Can you pls do a review on tram as trx4-m when it comes out

[@cpl.jenkins9651]

Been thinking about getting the Red Cat Kaiju... Would you want to review it? its 1/8th scale and brushless 6s

[@LesterBrown-lb7ne]

Air has to go ln the gas tank or the car wheel stop runing.

[@rcsmith5909]

A hole in the bottom of the file tank really?!WTH

[@rasheemgreedyman8255]

Which ones are faster the gas ones or the electric 2 Fast 2 Furious.!!!💯💯🔥🔥💥💥

[@Chris-kk6ek]

How do you adjust the carb?

[@HighSocietyHobbies]

Same people that say your waffling on are probably too young to understand or owe money for things they shouldn’t an have a poor standard or living themselfs not talking down on anyone but geez the man’s just trying to give some honest very good advice that should be a tool of education and not thought of that he’s just rambling on. Respect for that kev some people need to hear it from the people they idol or look up to cause it’s a great way to give others the understanding of how to live happier an have a better life ❤️🤘🏽

[@andys3889]

love this car somuch

[@andys3889]

good job Kev with all your videos

[@andys3889]

this is so true

[@andys3889]

this is so true bro

[@Pull_It_Apart_Paul_Ham_CB]

What is your ebay shop called?

[@DavidHernandez-mf4ek]

Dave in the House from usa nice

[@DavidHernandez-mf4ek]

Dave in the house USA learn tons from u thank u

[@basmalabidi3357]

I had the DVLXE 2.0 lightbulb battery all the way I burned my shed down with that nitro

[@philbartoli2011]

Game over rc truck in the works? Made to your toughness spec Kev?

[@Moonstonercdesigns]

Use Teflon tape and a tapered thread pipe plug. Silicon and epoxy will get eaten up by the fuel. The plastic used in the Teflon tape is fuel and oil safe. 👍👍

[@mikepevine3389]

Just spent $1400 on this rig, be here next week. Hope it doesnt have this problem 😳

[@jansrensen6987]

can you bye this lossi in elektric version

[@nickwebb2342]

Hi kev , I love your video's. I subscribed about 9 months ago. I've since brought a traxxas maxx v2, I'm in new Zealand and there's not a lot of parts available here as yet. I'm not a hard basher but what parts are the most likely to fail first ? I'm thinking I should order some spares but I'm new to rc and dont really know where to started Any advice would be much appreciated. Cheers ,

[@boostg20able]

Hey can u help me with a nitro red cat shockwave what can I do to it make it faster

[@ajfoss7714]

I watch all ur videos Kevin I like them all n I love the fact that your honest with your rc car opinion thanks for being so honest and respectful to us as watchers

[@BARION123]

Hi Kev, love the video's mate keep up the good work. I'm thinking of getting my first rc basher car do I go nitro or battery?

[@Dos_Rc]

Go lipo nitro is very finiki messing with the needles running rich or to lean ect

[@jay82bob]

deez is right. lipo are faster cleaner easier to maintain especially as you are new to r.c. good luck!

[@justincoleman9776]

I concur, petrol/gas is a pain in the a$$. The only thing you need to be careful about is not using more Ss than your system can handle. LiPo is the best but NiMH can save you some money. They also don't tend to catch fire nearly as often

[@rcnitroguy9317]

That’s crazy why not just use the same tank from the Losi 5t

[@flinchdaddy9057]

Best RC content on here 🤙🏻

[@biggsteve1975]

New job idea for Kev. Motivational speaker.

[@butzaman5139]

Screw with o-ring should do it

[@ryangoldstein502]

samething with mine but i metled the hole closed and ir worked

[@Eric78360]

Wish they had a roller 5t or an electric version.

[@jennc8554]

The problem is they replaced tank with one with the same damn issue! 2 tanks in and 2 leaks same spot🤦🏼‍♀️

[@Mike-sk7gt]

Mine didn't come like that thank god

[@Lesley_Pokemon]

22:14 you pronounced my name right :)

[@meathead2676]

When are you gonna get back to this car...🤷‍♂️ or have you..

[@QuestionMarkJon]

You should sand it to make the epoxy stick better.

[@davidmitchell-kb9ji]

Great vids mate I came across your channel by accident when I was looking for how to upgrade my ftx carnage nitro and now I'm watching every vid you have done cos you're a proper entertainer and also as a beginner I'm learning loads from you, so many thanks... it's so much fun tearing about like a nutcase lol yeah mc donalds is my go to place when I can't go loo, 1 burger and that clears me out lol. Love it how you're so good to your viewers and honest reviews. You look like you have such a great and fun life with all the toys and the other massive toy you have I'm really jealous lol no honestly you seem like a great fella so really deserve it and I wish you and all people you know good karma. Keep up the great work and if you have any tips for the carnage nt that'd be awesome. Anyway enough typing I'm off to check more of your vids!!

[@Willisfitner]

What the hell is a tv license???? Can someone explain?

[@Willisfitner]

NVM right after I posted he said 😂

[@rob2738]

Sell the lambo, that will get you a good house. 🤣

[@DavidHernandez-mf4ek]

what is the right or left of the car,, Drivers side or other but USA ROADS LOL

[@markparsons1825]

Just so you know you have 1.2k likes at this point M.O.G you rule!

[@Marmaladetaco9163]

Thanks for the awesome content..I can't wait for the new vids coming to main channel ..

[@chopsmorris5690]

What a needed upgrade for. The mini max

[@shaunjenkins9310]

It takes 12 to 16 hours to dry kev

[@rctrucks2094]

Kevin you need to get the new Traxxas XRT

[@basmalabidi3357]

Traxxas Max all the way Hell yeah I got 10 of them and I only work on the hardware. I would really love to know how to work on the software and ESC but my dyslexia slows me down help me out Kev.

[@steveanton3197]

Lov you kev Steve from Australia

[@tonystpierre2887]

What is your favorite Rc number 1

[@chopsmorris5690]

Aybe the fuel line can be ran in the bottom hole

[@rickykonoloff5047]

U could make a video sawing wood and we would watch it lol

[@rcsmith5909]

I would be pissed absolutely unacceptable!!! 🔥🔥Hazard

[@ryangoldstein502]

shoulda been a recall on them tanks they recall everything else

[@tonystpierre2887]

Mine doesn't have a hole, it's perfect.

[@Porkpickle]

Probably more likely from the blow mold process

[@robertcollier7257]

That hole may be for running some tubing from the exhaust to pressurize the fuel tank

[@classicalyoutubecaster]

Love from Sri Lanka

[@sebumyebum]

The DBXL didn't start as a Losi. I think it was a Redcat (not 100%) but definitely not a Losi.

[@Mike-sk7gt]

It's not on

[@JSprayaEntertainment]

0:20 waffle along ... LOL

[@integrityrc7356]

Put the drain hole there 🧐

[@neontetra1000]

By the sound of it Kev might be better to just buy a cheap bit of land in the middle of nowhere and build a worship and cabin and race track to custom spec . Sounds like he was talking about at least million pound or 2 house with those interest payments!

[@tonystpierre2887]

That should work

[@nicholasemmert307]

It’s for low fuel telemetry! Lol

[@RustybeltRC]

1:51:39 is the SpongeBob question.

[@jamesmacswell9165]

🤣 McDonald's pink slime also 🥚

[@mikevasquez7118]

Nothing going to stick, because your messing with fuel, so the only solution is a rubber plug it want deteriorate or leak and it's gas proof... That's my fix...

[@shaunodriscoll]

Wrap it in Gaffa tape it’ll be fine 😂😂😂

[@muskokamike127]

Gaffer is the word you're looking for.

[@shaunodriscoll]

@@muskokamike127 fabulous missed that😂😂😂

[@guycarpenter8838]

I love your Channel

[@mikevasquez7118]

Put a rubber plug in it..