Nice setup man! This is probably really close to what I'm running now with my Mini T. I went with the 18T pinion because it's the biggest I can find for 2mm shaft and the stock one on the T is 15T. Cheaper 8200kv motor but it's holding up ok so far, and doesn't get too hot. 40-50mph is plenty fast for this scale. Is it the fastest? No, but it's fast enough.
@johndavidson402 Жыл бұрын
Thanks, I use this for indoor clay track running. This is just what it can do off the track with no prep from clay to Asphalt.
@johndavidson402 Жыл бұрын
Here you go pinion gears for the losi mini www.robinsonracing.com/catalog/2mm_pinion.html
@MaddmaxxxRc Жыл бұрын
Which 0808 you have in there? Bueatiful set up brotha 👍🏼
@johndavidson402 Жыл бұрын
Thanks, I have the 8200kv motor in it. At the indoor track I had to gear up and set the max kv to 5900kv for indoor clay.
@Dickson21910 ай бұрын
You can program it to where the 8200kv motor only does 5900kv?..
@israeltorres4109 Жыл бұрын
What’s the temps like after all them passes?
@johndavidson402 Жыл бұрын
Nice and cool, it's stock gearing and not really running it that hard
@johndavidson402 Жыл бұрын
You had to be bored to find my channel. Here is one with a Hobbywing setup. kzbin.info/www/bejne/onbOhIt5ltqtaposi=uxD3ZdothinG-2as
@israeltorres4109 Жыл бұрын
I’m building a mini b Baja bug conversion and putting Axial yeti jr rear paddle tires and front ribs on it. They are a bigger tire and wheel combo. You think the castle or the hobbywing would be a better match? With the hobbywing setup are you running 2s or 3s and what kv motor? Thanks for all the info I appreciate it
@johndavidson402 Жыл бұрын
Everything I run is 2s. The castle is the way I would go. The motor is physical bigger and more power. The castle motor is a beast. It can take way more gear and weight. Also the trending is nice to use and helpfull. Sounds like you are building something fun. I'm running the castle 7800kv I believe. When i run it on the track i take it to 55% power.