Ok here's what they're not telling you. 1: If you have an early model mini b, you probably need a rear diff cover to make this work. If you don't have two empty screw holes in the back between the axles, you need more parts. 2. The sway bar sets aren't the only parts you need. You need 4 part packs in total to install the sway bars on any mini b. Possibly a fifth, the rear diff cover. TLR314001 Front Sway Bars TLR314002 Rear Sway Bars TLR314003 Front Camber Block TLR314004 Rear Sway Bar Cover
@seanrobinson38138 ай бұрын
THANK YOU, for clearing that up... i watched this twice, puzzled as to what I am missing here with my pro roller as well. Doesn't leave me with good feelings either. No explanation from Losi is not cool. Thanks again.
@thebonerack87878 ай бұрын
Do you mean a gear box case? No holes on rolling chassis version. Wondering if they can be drilled out to fit the rear sway bar bracket. Also, I have RPM front and rear A-arms. First glance, holes for sway bar stays are absent.
@floridabudgetbuilds41578 ай бұрын
@@thebonerack8787 if you look at the rear end of the car. Between the two axles, there should be two empty screw holes. On the rear of the diff.
@thebonerack87878 ай бұрын
@@floridabudgetbuilds4157 Thank you but there are no mounting holes on the back of the transmission case. My guess is that Losi changed the part.
@floridabudgetbuilds41578 ай бұрын
@@thebonerack8787 Yeah, the RPM arms don't have mounting holes for the sway bars. Can confirm.
@midwestern_rc8 ай бұрын
Honestly a great video/presentation. But as with the rear you guys mentioned you need the rear sway bar mount, correct me if I’m wrong but you need the V2 aluminum camber block up front which I think you forgot to mention. Also just my 2 cents, make em 280$ and include aluminum shocks that we can tune and change fluids. These plastic shocks are flat, wrinkly booty. Besides that I’m wildly obsessed with the mini B hahahaha
@Pswans5098 ай бұрын
What’s the front wing model number
@94kong947 ай бұрын
You need to get rid of the music and when you’re showing the pieces especially the tiny ones you need to zoom in some more so we can actually see the piece not your fingers
@jaysencu9372 ай бұрын
Which mini B is this model? Mine doesn’t have those 2 holes below the back tower where you installed the aluminum where the rear sway bar goes zzz
@ajustice20109 ай бұрын
Will you offer a smaller pinion ? Is it a 3mm shaft but what pitch and tooth is it stock ?
@cyclonerc162510 ай бұрын
Very nice vid. Thanks for sharing 👊
@jdawgg39756 ай бұрын
The b set fits the t ?
@94kong946 ай бұрын
I have the pro roller and there is no groove anywhere and nowhere to put the screws.?
@K8Nicole9 ай бұрын
Thank you sir.
@Pswans5098 ай бұрын
Why does your rear have mounting holes for the rear sway bar? Mine doesn’t
@thebonerack87878 ай бұрын
Nor does mine. Must be on the new brushless RTR, not on the pro roller. Part # LOS212021 shows no mounting holes.
@swissfreek8 ай бұрын
@@thebonerack8787 correct. only the brushless RTR comes with those mounting holes. There is a V2 rear diff case that has them, which will fit on any mini-B (and also mini-T I think).
@twitchytwitch95039 ай бұрын
Will these work on the losi mini T or is it just for the B
@chrisjames78038 ай бұрын
the suspension arms and overall wheelwabse width is the same, so i dont see why not, i believe the only difference is a longer chassis plate on the T
@bigmanrctoys84849 ай бұрын
Plz Losi release a TLR tuned Tenacity TT Pro ……Plzzzzzz!!!!!