Lots of Braaap But No Movement On Mr Hyde Revo 3.3 ideas?

[@Drumbone71]

Mine was doing that after my last run after I hit some brush. No reverse either. Took apart the tranny. It was fine. Gears all good. When I put it back together, looks like it might be good. Test it tomorrow. There’s a silver spring by the throttle linkages. They connect the servo and a hook connects to a hole by engine to engage something. Gonna try it tomorrow. Might check that and the clutch components not slipper.

[@islandrc-duke1972]

cool rc,maybe check the clutch shoes or something in the transmission

[@CrazyDad226]

Could be a few thing. Clutch bell shoes or the slipper clutch. Your slipper csn look fine. But they are like break shoes can get smoked or loose. I do not think it is your foward main gear cause it moves foward a little. Wish i was there and you would be running for sure

[@MR.B.1620]

I'm kinda feeling clutch bell shoes because I've got the slipper locked up tight

[@jessethemes]

That sound is your clutch bell slipping. Replay the clutch shoes and you'll be good.

[@chrisb8489]

My jato was acting the same way. Took apart the gear box and found that my primary shaft sheared right in half. One tooth broke on diff gear, 2nd gear housing cracked.

[@MR.B.1620]

We determined it was the clutch shoes worn down to nothing but now I believe I destroyed reverse gear hahahaha

[@chrisb8489]

That's definitely an easier fix ! She rides another day 🤘

[@MR.B.1620]

@@chrisb8489 you're not kidding there!

[@rcsendandblast1579]

It almost sounds like the flywheel collet let loose the flywheel. Or the clutch is slipping which I don’t thing so One other thing which I doubt. The 2 gears behind the spur are done with My guess is double check the nut that tightens the flywheel. It sounds like crank slippage at the flywheel.

[@MR.B.1620]

Heck yeah y'all, I appreciate your help. What I am gathering is that I need to remove he engine regardless... right? I have not done that ever yet so, new experience. But I aint skurred I mean, Ill do it I just want to make sure that is what needs to be done. Whether it is the clutch or the flywheel.. I need to remove the engine to determine, right? Gulp... we got this ish.

[@ken6440]

clutch sleeper, see if clutch sleeper pad still good condition see how thick the clutch pad is, if pad still thick tighten the nut 1/4 turn until it turns the wheels

[@MR.B.1620]

I had that thing so tight it wouldn't budge hahaha, thank you!

[@ken6440]

@@MR.B.1620 then time to change the clutch bell shoe for sure lolz

[@patrickwynnjr]

one way berring and or clutch replace both