Loving the xTool screen printer and making screens with a laser!

[@randuhhh]

Hi I took 2 years of Digital Printing and Imaging Communications at my local technical school concurrently in high school. This looks great, I know screen printing can be scary at first but omg good job! I only have a small suggestion, when pulling the ink it’s normally done with a couple swipes in the same direction. That way I’ve learned is much gentler on your hands and wrists, carpal tunnel is a big hurdle in the screen printing industry. 1000% please feel free to ignore my advice if your way works for you! And if you like your way then thinning down the ink with a curable reducer would probably help with the pressure needed to swipe the screen ☺️

[@tonyhanson7341]

Not been bais you need to spray adhesive on the shirt board .to hold uour shirt down .or the shirt will lift with the screen .BLESSINGS

[@susanthorpe1740]

Wow, wish I could afford it ❤

[@AngieHolden]

Definitely an investment!

[@Rafeeqjphoto]

What's the screen size ?

[@fernandodazan6633]

Lo siento mucho señorita, pero la tinta se impregna deslizando el racero de arriba hacia el frente [ nunca estando en posición lateral ] y mucho menos como si se estuviera pintando una pared... ah! y hay que fijar la playera con un spray a la superficie plana de la maquina.

[@JudyAngelman]

I want to try this but will have to start with smaller version at some point. Can you do this on darker colored shirts with the paints?

[@AngieHolden]

You can! White on black is a bit tricky and you may need multiple coats.

[@Poppa_Smoke_DMZ]

How do you cure the ink?

[@AngieHolden]

You would just iron it. Most inks have instruction for ironing after they dry.

[@tonyhanson7341]

Don't push and pull on a white shirt .you will double print

[@aya825936]

should take a printing class or watch a video lol