i think he got nervous he knows what to do but with someone recording specially if it was his boss or supervisor would be difficult to do this..it happens to me also
@davidsisson70593 жыл бұрын
Yes these are hard. I did four tire that were low profile. On a different type of machine. It a while but I got it done. I've done tires for awhile and these types of r difficult. He got lucky he using nice machine. NICE job.
@mark-ui8lu2 жыл бұрын
Nice job? Nice machine? The good shops have touchless machines and did you see home boy mangle the wheel multiple times! I can’t believe anyone would let him touch a nice wheel but this is a dark shop it appears
@carlomango4075 жыл бұрын
This is NOT an easy task.. even for the so called master techs is still a problem.. these tires are a nightmare and you run the risk of damaging the tpms sensor.. it's either do it fast and dedroy the sensor or do it at your own pace and methodically..
@sedicibrah20252 жыл бұрын
You gotta walk the bead
@MrYogitron922 жыл бұрын
I did a 26" wheel with 25 series tire by hand because the machine couldn't do it. The trick is to know how tires work on rims. Lower the opposite side below the big lip to allow the tire slip over the wheel. Not sure if that was clear but I still do them by hand. Although I'm not a tire technician anymore. I do construction now but I still save money by doing it at home manually.
@damonlee707 Жыл бұрын
I plan on installing my 275/25/26 tires myself as well very soon (can't find ANY shops in my area that can do 26's). Putting them on seems pretty easy but how about taking off the old tires on 26's?
@MrYogitron92 Жыл бұрын
@@damonlee707 I use a piece of 2"x4", a jack, and a truck to pop beads at home 😉
@TheRealAaronWitchey6 ай бұрын
Same here bro, by hand with 40 series....then I come on here and see all these people crying because the tire machine don't just flip it on there for them😂 ROFL....bros please! Stop embarrassing yourselves! ...... Damn, this video is still playing of this fool trying to put a damn tire on!
@LEEBEASTTHEBANАй бұрын
I'm 40 when I had auto I never knew how amazing this machine was, until now trying to repair 22 inch wheel 😢
@Ohhighbud3 жыл бұрын
Still looks like a pain vs a normal tire lol. That being said, sign me up for the auto tire changer.
@joshbuell8943 жыл бұрын
I do low profile all the time on a coats Apx 80 and it’s not that difficult once you get it down. He did all right but should of done a few things differently. I always no not and dismount with the outside of the rim facing me.
@Fas1132 жыл бұрын
Its upside down rim, thats how u do it u cant get dire off when the otherside is faceing u there is to type of wheel. And yes that was way to slow, we do whole car in 20 min u dont even need a fanci machine. Just need good spray lube.
@robertficek75862 жыл бұрын
You can tell which way the rim should be clamped because the drop center is higher on the back, it's a bit odd but this is an after market rim so style and having the larger barrel and larger apperance in front was probably the logic to that rim.
@danielhackett62823 жыл бұрын
That machine is dope
@theelitemedic34003 жыл бұрын
Guy wanted his 20 inch Camaro SS tires swapped and I told him we couldn't cuz our machines aren't rated to handle low profiles
@mark-ui8lu2 жыл бұрын
20” is small. What kind of shop do you work at? Garbage shop it seems
@fiehlsport Жыл бұрын
The tech is rated to handle low profile tires, not the machine. If you know what you’re doing, anything with a duckhead will work. Lube, assist arms, patience, and care.
@alonsoguevara23245 жыл бұрын
What kind of machine you running nice set up
@o0lunchboxxx0o912 жыл бұрын
Freaking hate the dee beading process the most on low profiles I’ll get it all popped on one side flip it around to do the other side and when I’m im done I look at the first side and it freaking re beaded itself
@travissamms3042 жыл бұрын
He never went over the duckhead then under. He had all of the tire under the duckhead when installing which is a good way to rip a bead.
@liamgulyas94762 ай бұрын
LOUD ASS IMPACT IN THE BACK LMAO
@jacobvillarreal45111 ай бұрын
With his technique wouldnt it be better to use two metal rods instead one when demounting the tire? Wouldn’t it keep the tire from going back down like it did? Worked half a year in a tireshop and always hated customers with LP Tires lol
@ty20105 жыл бұрын
Now do it on an old center post w/o scratching
@Fas1132 жыл бұрын
And that guy in video just but it on tyre, no point off that wheel needs lube as well and whole tyre needs it. Thats why i use spray lube for that. Comes off so easy
@RowdyEnt.10 ай бұрын
My bro needs some training. Or to buy his own set of nice wheels, change the tires and admire a the scratches he put in the chrome. I would not be happy. This is why i bought my own machines.
@Fas1132 жыл бұрын
Spray lube while pressin tyre down, and but it on rim and tire is the key, u dont need even a fanci machine
@mapatoys7016 жыл бұрын
Like
@jessicamorales75742 жыл бұрын
Por que no puso otra barra en el lado opuesto cuando comenzo a sacarla??? Es mas facil, y estuvo a punto de perder Los dientes.
@ozkaralvarado84412 жыл бұрын
Se ve que sabes,yo creo esta aprendiendo,porque con los brazos de la máquina es mucho mas facil,y aun sin los brazos de la maquina se hace mucho mas rapido
@Koko_Sam2 жыл бұрын
So here's my question to my fellow techs. Here is what I use at my shop 1 jack $300 1 air gun $350 Air hose $25 Air compressor $3000 Coats Ex70 series $15,000 Plus human labor cause tire isn't going to mount itself. How much do you charge to mount and computer balance this tire? I charge $30 each and that includes tires disposal (and i think that's still cheap). My shop is in socal.
@mkvingti2 жыл бұрын
$30 a tire for mounting only is crazy.
@angelalanis35552 жыл бұрын
thats a bit cheap bro i charge 25 for the mounting/dismounting and disposal but 10 dollars for balancing each tire
@nerijusdanilevicius22522 жыл бұрын
@@angelalanis3555 10 for each? Only for balancing? Wtf
@maxheadroom2246 ай бұрын
Your product is priced under the market but it depends on your client. I worked in a chain store and we charged 20 for install and 3.50 for disposal. People would still complain about the price. We simply would tell them the shop half a mile away would gladly do it for 40 and they always were in disbelief. It got to be to the point where people would tip us cash as they saw us struggle with stupid 30 profiles, etc. Management was not happy but not unhappy enough to pay us more or price the product correctly!
@ecgtyres6547 Жыл бұрын
see how he removed the valve SCRATCH THE RIM!!! LOL Ithimk his friend was right make the video after training not before haha
@user-bp3xo2ic9b28 күн бұрын
Hahahhah I been changing tires for years I even use the tilt back taking the tire off the way he done it lol he definitely doesn't know how to use that machine
@nomanahmad25625 жыл бұрын
I almost broke my machine today truing to mount 235 45 17 fuck that really pissed me off and a 1 hr job took me 3 hr
@johndavolta31243 жыл бұрын
How did you almost break it?
@robertficek75862 жыл бұрын
I would say anything with a 45 and smaller profile needs a helper arm, the side walls are too stiff, there are some plastic curved wedges you can buy and clip around the rim which might work to get the bead to drop down without an arm, maybe 3-4 of those could help
@intorsusvolo7834 Жыл бұрын
Especially when the company/boss time you to do it in 15-20 minutes every time.
@priyanksharma8829 Жыл бұрын
How much cost of this machine
@rowenramnath20168 ай бұрын
Do you see how hard it takes to strip the old one and put a new Tyre. The alignment guy likes to rush us 😡 says hurry hurry, how long how long
@mightymouse5233 Жыл бұрын
can a low profile tire be patched up if it got a mail in it
@raulvaldez162211 ай бұрын
Yes
@ja7419Ай бұрын
If its run flat then no it should be replaced.
@michaelfuckinghowell67072 жыл бұрын
Don't ask me why but 30s are easier than 28s
@ClipzNationYT Жыл бұрын
I would have been done by now no protection for the rim he scratched tf out that rim multiple times
@33rdmorgan433 ай бұрын
It fosho not easy, especially if you workin wit 25s like a 275/25/28, mannnnn it will have you sweatin to dismount n mount it
@dennisz49411 ай бұрын
unbelievable we had to watch him repair the machine first.
@williamjohnson42556 жыл бұрын
People come her for DIY vids. It is not like most people have a tire changing machine.
@Skizm_admin Жыл бұрын
Cow boy 😂😂😂😂
@williamjohnson42556 жыл бұрын
Done easy if you have a machine????????
@hamchillyvlog60346 жыл бұрын
with the good technique, it is shorten the time and reduce the chance of damaging the rim. Yes it is easier, less effort is required.
@CHIBA280CRV3 жыл бұрын
Nothing easy about it , I have a machine and it’s a pain in the balls ! I can’t seem to pull the tire over the ducks beak!! I will have to try that upside down like there doing it maybe it’ll work for me ..Lol
@joeszucs2190 Жыл бұрын
Boooooooooo. Not the correct machine at all for that wheel. Id be looking for a pound of flesh if you did my wheel that way.
@davidholliss-fx8ze Жыл бұрын
Very slow
@carlomango4075 жыл бұрын
This is NOT an easy task.. even for the so called master techs is still a problem.. these tires are a nightmare and you run the risk of damaging the tpms sensor.. it's either do it fast and dedroy the sensor or do it at your own pace and methodically..