On the road Dismounting & Mounting a 20" tire (Full Video)

Full video changing a 20" tire on the road
Bead Breaker
amzn.to/2Jdp84h
Tire irons
amzn.to/2RT9Kg2

[@blueskyfield]

ouch, no protection on the front of the wheel. wonder how deep the scratches are and how much paint is damaged.

[@BoomBoom-rd9yr]

No wasted moves - nothing like professionals!

[@laynejohnson9927]

Even did a quick clean of the rim super professional right there you don’t really see much of that at a shop

[@Caliguy760]

Bro your videos are cool, but you never really explain what kind of bars or equipment you use. You have skills though no doubt.

[@laynejohnson9927]

Man this dude is good for some reason every time I do a passengers tire the slide hammer doesn’t do crap it requires a duck bill hammer

[@archimedes7642]

Not a Single word. But Learned so much.

[@michaelearneston7899]

Love how this is a one man job 👍

[@eduardohernandez5366]

Man you're really good ! What kind of bead breaker is the one you used ?

[@roymariano7116]

nice. but, what about the balancing ?

[@TripleATireService]

It’s temporary so no balance

[@BetoAntrax100]

You can out balancing beats on it

[@kevinwebster9715]

You .......10 min start to finish Tire Shop.....3hrs and an over payment

[@14dogday]

lmao

[@tonykollar6870]

I tried it at home using same method like you... Hell I couldn't put them fokin tires down

[@aasastephenson1538]

Nice video

[@zolai12]

What sort of lubricants do you use for the new tyre .. thanks

[@aristas30002000]

Cool job what kind of bars are those ?

[@TripleATireService]

amzn.to/2T3KCnA

[@aries24m]

Pregunta! Cuánto lleva de torque regularmente al apretar? Gracias!

[@franktalksprogramming]

Bro I just went through hell to not even be able to Mount my tire and you just did that in 20 seconds wtf

[@conversationovercoffee]

Good shit... Will try this on my Audi

[@samdavis1228]

no scratches on the wheel?

[@TripleATireService]

Reverse mount wheel

[@Atonement-]

helluva paint job

[@Robstar-m5l]

now i learned something i liked your video

[@BUSTRCHERRI]

It's all about that bead breaker tool. I need one of those for sure.

[@mannine99]

At my point it´s all about the lube. i had to take tire of from 14" steel rim with just three tire iron, breaking the bead with out lube was PIA. And oh, on the road tyre change? i did not have compressed air, just an bicycle pump, and it was so hard to get new tire back on the bead again.

[@TripleATireService]

amzn.to/2Jdp84h

[@boblong6796]

Can you recommend the tire irons you use? I was going to get some at harbor freight.

[@TripleATireService]

amzn.to/2JaxVnw

[@davids1033]

Who parks on the grass?

[@CENTAUR559]

Wow.. that was FAST. I've seen placed with professional equipment take longer. What kinda bar was that you were using to break the bead?

[@TripleATireService]

shop.myerstiresupply.com/ERP2Web49/e2wItemMain.aspx?parentId=00047133

[@anoktokbatosai8113]

Nice... where did you get that slide hammer style bead breaker?

[@TripleATireService]

Gaither Slide Hammer amzn.to/2yAUqfm

[@anoktokbatosai8113]

TripleATireService thank you so much for that link . I’m currently trying to build my mobile tire business. How did you or do you market your business out there? And on this video what type of tire bars did you use to not scuff those aluminum rims people take care of so dearly? Again I know you’re a busy man and thanks for your response 👍🙏

[@YiyesRules13]

Very fast like ninja 👍😊

[@juanlanda967]

Dont forget to get your wheels balanced. Nice job.

[@authentic_existence]

Homies really about that life!!

[@do_not_rotateyour_phone3957]

Nice work and fast.. it could've been better next time if you put rim guards before prying.

[@TripleATireService]

True but thought I really didn’t need to use them since this was a reverse mounted wheel.

[@spartanwheelman1315]

Clean bro

[@TripleATireService]

Thanks!!!

[@scottmcmartin550]

I for got to ask you what size are those bars that your using to take that car tire off with

[@TripleATireService]

+Scott Mcmartin KenTool T16A 16" bars

[@leonjamison402]

Thanks

[@eduardohernandez1722]

What kind of bead breaker is the one you used ?

[@JasonSmith-qx3zh]

Ebay or Amazon carry those. Under tire bead breaker.

[@twinturbo7234]

No excuses', no music , solid routine without stopping to talk and get off track or trip it up. All the others Have to play music And talk????

[@rodneyheathingtonjr8529]

What is the name of that tool you used in 3:20

[@TripleATireService]

Gaither Slide Hammer amzn.to/2yAUqfm

[@JasonSmith-qx3zh]

I wished he would have done a couple of things for the novice but you can tell he a touch above!

[@LoneWolf-mz1ju]

On the road but he got all those tools LMAO

[@Original.soletee98]

Service call, tire tech

[@PreferMetal1]

Brilliant, but be better in sunlight.

[@Engineerboy100]

Pretty cool, but you should never work on a car that's raised without jack stands. It's not worth it.

[@hdroadservice2021]

What brand are those small bars?

[@TripleATireService]

Kentool

[@Engineerboy100]

Love your beed breaker! But your jack stands, not so much, actually not at all. Lost a friend like that. Not good!

[@boblong6796]

Amazing. I’m going to try. Thank you!🙌

[@TieuXuanTu75]

No balance tyre kk

[@chuckpyle1624]

Cool tool

[@kevinvaldivia9273]

You make it look so easy man got any tips were to buy good bars not cheapie's

[@TripleATireService]

www.kentool.com

[@kevinvaldivia9273]

TripleATireService thank you im trying to go on my own this summer i have a lot to learn for the small tires I've done a lot of simi tires but not the ones with Rings around them...thanks for the video's

[@josephcampbell2478]

So was the valve cord leaking or not??

[@vanillarain711]

Incredible!

[@ozoneswiftak]

Bad ass

[@scottmcmartin550]

I have to ask how do you not scratch a rim like that one

[@TripleATireService]

+Scott Mcmartin it was a reverse mount wheel. I like to use the smaller bars for any passenger or smaller tires. In case it is a front mount wheel I do have leather protectors that snap on the rims lip so it prevents any damage.

[@DigitalBenny]

TripleATireService I do these wheels almost the same way when not at a machine and as long as you properly lubricate and are precise with the bars you won't leave a mark at all, even on a black painted wheel such as this. BUT ...that's not a reverse mount. the drop center is on the front, where you dismounted it... And those $60 1.5T aluminum jacks are the balls, I use them too 😉

[@dirtsailoroff-road5580]

I hope they're going to go have them balanced lol

[@CarsFitnessMoney]

Most of the car tires I balance only need 1/4-1/2 ounce of weight. You probably wouldn't notice much of a difference.

[@ponceno7450]

No balanced lol 🤔🤔??

[@chuckpyle1624]

I do truck tires and trailer mechanic work in Cleveland Ohio

[@emilianomendoza7500]

👍

[@jacobwalter6944]

I’m just

[@mikebearden9295]

Any rookie tire changer could scratch the wheel while putting on a Michelin. That's easy to do. How about do the same video, only this time, mount a sumitomo on the rear and balance it on the car. Then I'll be impressed. What your doing is simple, plus you have all the necessary tools to do the job. Most of us tire techs don't have those kinda tools at home. Our tools are at the shop. You are using a service truck. If you can't change that tire with a service truck, you don't need to be driving that service truck.

[@أحمدخميسمجاهد]

ممكن اكونت فيس بوك احب اتواصل معك

[@TripleATireService]

+‫الماجيكو الكبير‬‎ البريد الإلكتروني

[@jjaguiniga]

talk lol

[@DubCityRider]

Lol "on the road" with tools people don't just happen to carry with them. Great skills but misleading title.

[@STREETRACEN4U]

i carry these tools with me