Low Rider S Gauge Relocation Bezel Installation - FXLRS

[@benstone687]

Installed mine yesterday, and used a MyMachinist gauge block off plate. Great gauge mount. Instructions are spot on in this video!

[@gifty7464]

Wow, thanks! Wish you could post pics in replies!

[@chip9832]

Looks fantastic

[@frankblack509]

Looks great......nice job

[@gifty7464]

Thanks 👍

[@2500gs]

Good

[@ianward4609]

Great vid. Where did you source the blanking grommet for top if frame?.

[@gifty7464]

Hi. I just used the stock one that was in that location and cut it from the wiring, and then just reused it to plug the hole.

[@TrudleR]

Very nice job! Will those work with the dyna version? I have and FXDLS and plan to do this modification!

[@gifty7464]

I don’t know for sure, but I can send you one to try and if it fits you can pay then, if not, you can send back

[@romegentry9672]

Do you make with one opening in the middle of it for just the Speedometer?

[@gifty7464]

I do not have one 'in stock', but could pretty easily design it up and make a one-off. Probably would cost about $135 shipped.

[@patvail4422]

Can you add a picture of the block off plates installed? Thanks in advance!!

[@gifty7464]

Not sure how to do this. But, if you email me at [e-mail] I’ll send you a pic with the block off installed on the bike!

[@d00dz45]

Super interested in grabbing one of these from you, my only concern is how visible are they? I feel like the riser would block most of the gauge? Thanks in advance!

[@gifty7464]

I have the 5.5” risers (2” more than stock) and I get almost full view. Stock risers should give full view. Have them ready to ship!

[@d00dz45]

@@gifty7464 sorry for the delay in response but absolutely! I’d love to get one of these from you

[@gifty7464]

@@d00dz45 Sweet! Just email me at [e-mail] and I'll send you a Paypal invoice!

[@tophat_mustache]

Super cool. Are you still making them? And shipping to the US?

[@gifty7464]

Yes sir! Have the bezel in gloss & textured black powder coat. Email [e-mail]. $115 shipped.

[@tophat_mustache]

Great. I'll write you an email.

[@tophat_mustache]

​@@gifty7464

[@brandonbroderick3717]

Interested in grabbing this and the block offs in textured black if you’re still doing them. Seeing 2 different emails in the comments and the paypal link doesnt give any options

[@gifty7464]

Yeah! Still selling them. Email is [e-mail]. Email me there and I’ll get you hooked up. Should be able to get them out early next week. USPS takes 2-3 days.

[@damonmuse6567]

Are the gauges on the FXLRS 4” diameter? Thank you kindly

[@gifty7464]

The holes for the gauges I went with 3.630"

[@mikew2054]

Hi, I’m thinking about doing this and then getting my whole tank custom re-sprayed, can I just dremmel off the bracket that sticks up from the tank easy enough do you know? Also what’s shipping to the U.K.? Cheers 👍🏼

[@gifty7464]

Hi! Yes, I think cut off the bracket and sand it down and paint is what some do. Shipping to UK is around $40 I believe. I could do $140 shipped for the bezel in powder coated black, and $175 with a blockoff plate for the gauges.

[@mikew2054]

@@gifty7464 ok great thanks, I think I’ll just for for the mount for the gauges. How do I place an order? Thanks

[@gifty7464]

@@mikew2054 just email me at [e-mail] and I’ll send you a PayPal link. You pay and I’ll ship within a few days. Just sent one to Australia last week.

[@OGDelisle]

Any updates on if this fits behind the Memphis shades fairing?

[@gifty7464]

I don’t have one so can’t test. But I can send you one with some very light scratches (shipping from vendor before they started packing individually) and you can try it out? Email me at [e-mail] and we can work something out.

[@gifty7464]

Apparently it does work with the Road Warrior fairing! Someone in forums just posted a pic showing it fitting.

[@carlwasko3970]

Hi. Are you still selling shipping? I am interested in the relo bezel and blockoffs. Thanks!

[@gifty7464]

Sure am! Email me at [e-mail] and I’ll send you the details. Shipped 2 last week.

[@jameswatkins2752]

Have you made the block out plate(s) yet?

[@gifty7464]

Ordering some next week. Will probably make those as a simple oval plate in textured black powder coat.

[@gifty7464]

Block off plates in textured powder coat, and another round of relocation bezels will be available to ship first week of January!

[@marcinzajac1449]

Hello. Did you have to replace the cables with longer ones? assuming a new riser 5 "

[@gifty7464]

Hey. I have 5” risers and no extension needed. The risers height actually isn’t a factor because the wire gets routed up front, not into or around the riser.

[@marcinzajac1449]

@@gifty7464 clutch cable and brake hose no extension is needed?

[@gifty7464]

For 5” risers, no.

[@angusterrasson5480]

Hey there are you still making these ? If so will you send to Australia ??? Cheers 👍

[@gifty7464]

Still making yes! Email me your address at [e-mail] and I’ll get you a quote. I think it’s usually $25-$30 shipping to AUS

[@angusterrasson5480]

I have emailed you today . Cheers 🍻 Buddy 👍👍👍

[@Crabman_87]

@@angusterrasson5480 did you end up getting them and fitting it all up?

[@MotoDealer]

Would this work if u had the new quarter fairing?

[@gifty7464]

I’ve been asked before, and not sure actually. I’d like to know. Can you send me some pics of the area where it would fit?

[@jameswatkins2752]

Can the bezel be used (gauge visibility) with the stock risers/handlebars?

[@gifty7464]

Yes it can. I have 5.5” risers (stock are 4”) and I can pretty much see both gauges in full. I’m 5’11”, stock seat.

[@jameswatkins2752]

I'm not that tall. I'm concerned about seeing the fuel gauge, etc. I've been looking at maybe getting some stock (or there about) height pullbacks.

[@jameswatkins2752]

@@gifty7464 Hey. Not sure if you've seen them yet, but guess where the gauges are located on the '22 Low Riders?

[@gifty7464]

@@jameswatkins2752 saw some pics, yeah. Looks like on bars? At least we’ll maybe have an option to buy a console that is slim with no holes for the tank

[@themann713281]

Do you still have the link?

[@themann713281]

@@gifty7464 ok just placed the order thanks

[@gifty7464]

@@themann713281 cool! Yep, got it. Order is placed with the supplier, I’ll keep you posted on when I’ll receive and ship to you. Thx again.

[@davidducharme1761]

Do you have a link for your bezel

[@coreyklippel6984]

Will this work with a Memphis shades fairing, I'd love to have one

[@gifty7464]

Can you send me a few pics? Does the stock plastic piece fit in front of the fairing? My bezel is same as the stock piece. I’ve been asked before, but don’t have a way to test it.

[@coreyklippel6984]

@Gifty74 I'm not near my bike next few weeks but will look through my pictures and see what I have that may show it. I did remount the stock plastic half moon shape piece behind the road warrior , Memphis shades

[@coreyklippel6984]

How can I send you the pictures.?

[@gifty7464]

Ah, good point. Email me at [e-mail]. I have a few with some shipping rub marks. Can send you one as a trial.

[@coreyklippel6984]

@Gifty74 will do Also check kzbin.info5C5rMIMFHtM?feature=share

[@jebusr1766]

I want to order both, have a link for that?

[@gifty7464]

Yes! Here is a link for the bezel & blockoff. $165 shipped. I have the bezels in gloss & textured black powder coat, and the blockoffs in textured only. paypal.me/gifty74/165

[@jebusr1766]

@@gifty7464 awesome, thank you! got my order in

[@paulhuntley9146]

Hey ,can you ship kit to Australia

[@gifty7464]

Think so! I’ll get it quoted for shipping.

[@angusterrasson5480]

I’m in Australia too . How did you get on with it ? Cheers 👍

[@gifty7464]

Hey! Sent one over there a few weeks ago. Think it was about $30 in shipping.

[@andrewbrown5136]

Can I still order this and mail to the uk

[@gifty7464]

Hi! Yes, shipping is pretty crazy, but I can send it USPS. Email me at [e-mail] for details and a Paypal link. Still making them yes!

[@ernestosantos4116]

Where did you get the kit from?

[@gifty7464]

I designed and had them made for me, to sell. I'm still selling them, $115 shipped in gloss black powder coat.

[@mikeetterley-crown8886]

Are these still available?

[@gifty7464]

Yes they are! Got your payment overnight. Thanks! I’ll be getting it out early this week.

[@michaelvitiello6043]

what risers are those?

[@gifty7464]

Basic 5.5” just to give it a little pullback.

[@michaelvitiello6043]

@@gifty7464 how does the brake line and clutch cable feel? is there enough slack? i was thinking doing the same thing on my 22 lowrider

[@bkress9638]

Are you still making these?

[@gifty7464]

Yes! Let me know what you need.

[@bkress9638]

What's the turn around time looking for gauge relocation. Do you have any pics of the block off plates?

[@gifty7464]

@@bkress9638 I just received a new order, ready to ship out as soon as tomorrow. If you email me I can send you some pics of the block offs, but they're very basic. Just a flat piece of steel powder coated, to cover the holes. Email is [e-mail]

[@jkengine02]

Hey man! Awesome video. Just sent you an email if you are still making these interested I. Purchasing

[@gifty7464]

Hi! Yes, still making them, have both textured & gloss black powder coated bezel plates available. Didn't see your email yet, can send to [e-mail]. Thanks!

[@jkengine02]

@@gifty7464 yes Ive sent it. I'll send it again!

[@jkengine02]

@Gifty74 check your junk mail too. Lmk what process you usually take for buyers to purchase your item. Thanks

[@gifty7464]

@@jkengine02 I did get your email and replied. Did you receive?

[@jkengine02]

@Gifty74 I did but I responded again asking for the link and did not get a respond yet!

[@benstone687]

Gifty74 do you have an Instagram ?

[@gifty7464]

No, not currently