Lowered 2003 F150 Walkaround

3/8 drop
Front- Crown Suspension 3 inch drop coil springs
DJM upper control arms
Belltech Street Performance shocks
Eibach camber kit
Rear- DJM flip kit & c notch
Crown suspension drop shackles
Belltech Street Performance shocks
Wheels- Dub Rio 6 20's
255/35R20 Forgiato tires
Audio-2 Skar Audio IVX 10's in a sealed box
Skar Audio RP 800.1 at 1 ohm
Sky High Car Audio 4 gauge power wire and 12 gauge speaker wire
Sony double din head unit
4 Pioneer 6x8's
4 Fultron tweeters
Exterior-Street Scene mirrors, Tinted windows, '09 F150 emblems, 6k HID's, LED lights through out truck

[@jimnzz4998]

Nice looking truck! I honestly like these flare sides better than the step sides, cant wait to get mine. Great view of what i hope mine will look!

[@slik3008]

This is a styleside flareside and stepside are two names for the same thing

[@Welcometochillis]

nicest Ford on KZbin bro good job

[@19jody72]

Damn bro.. love it! Looks good!!

[@greaselightning2122]

Dude this is sick asf I'm gonna do this to mine

[@bryanshields3723]

Cool truck

[@SPECIAL300MED1]

Nice paint

[@rojobackape1669]

Good job bro

[@dammitboy9251]

nice truck

[@daffyduck8971]

We're the djm upper control arms necessary for better alignment. I'm gathering parts now for the same drop and every kit I see with a three inch front drop is just the coils and camber alignment bolts.

[@AllenJones506]

daffy duck I did the upper control arms because I wanted the replaceable ball joint option. And the ball joint angle is closer to factory specs

[@mentallyunstable5149]

Love it 🔥

[@djpollo2474]

Where should I take my truck to do a c notch? Not names of the places but literally a place.

[@GeraltOfRivia99]

did you get thoe rims in 5 X 135 bolt pattern? or did you have to use a spacer/adapter to fit them?

[@AllenJones506]

Found these in 5x135, took forever to find them though! Not a ton of companies make wheels for these trucks anymore

[@By75Rum]

Damn that's a good looking truck. You still got it? Automatic or 5 speed? And is that an 8 foot bed?

[@jaleahnorris7923]

Nice. Is that the v6? Also did you have to use torsion keys? I’m trying to drop mine and I can’t find a full kit eBay has like half kits without c notch and keys

[@AllenJones506]

Yes. It’s a v6, Torison keys are only for 4wd, mines 2wd. You only need a c notch if you go lower that 4 inches in the rear

[@jaleahnorris7923]

Jeffrey Jones thanks man. I haven’t been able to find anyone who has knowledge in dropping trucks lol

[@2H2521]

Looks sweet, tires are way too skinny & small though.

[@irvinmarquezparra9960]

Do you have links for what you used plan to do the same drop on mine I have the same base model and everything

[@AllenJones506]

Irvin Marquez Parra do you have an Instagram? It would be easier than on KZbin lol

[@colinallen5151]

Jeffrey Jones trying to do this to my truck. please follow on instagram so you can send me some of the parts @colinallen1 it would be much appreciated!

[@AllenJones506]

Instagram is @ajones506

[@theodoreraz5055]

What's the flip kit for? I don't that match about dropped trucks

[@AllenJones506]

theodore raz it puts the leaf springs under the axle instead of on top of it. It “flips” the location of the springs.

[@mikehall883]

Hey, man sharp truck on those new emblems do they cover the holes from the old ones?

[@AllenJones506]

mike hall covered the holes perfect, just used some 3M heavy duty double sided tape to stick them on.

[@geremyr3410]

Where did you find the tires, rims and grill?

[@frankbieker7518]

Where did you get your door mirrors from.. ??

[@omarvargas7333]

What was the cost to lower the truck if you don't mind me asking

[@AllenJones506]

Front: Djm Uppers - $229 3 inch Springs - $100 Belltech Shocks- $120 Rear: Djm Flip kit w/ c notch - $250 2 inch Drop shackles- $50 Belltech Shocks- $120 Labor for Cnotch @ kingpin automotive- $350 I did all the work myself other than the notch and I should have gotten an alignment but I got lucky and the truck drove great without one.

[@omarvargas7333]

Not bad at all. Very nice looking f150. I like the wheels. What size and brand are they? Tire size? I just pick up a f150 stock and would like it to look like yours.

[@FirstNameLastName-wq4xb]

where did you buy the grille??

[@AllenJones506]

First Name Last Name The grill came on it when I bought it used back in 2011. I’m sure you can find the same one of eBay

[@coyoterob2839]

It’s a billet grill

[@Drivingonsidewall]

Should lower the front more and get thicker tires. It'll look more flush. I have the same truck just white

[@AllenJones506]

Lowered_F150 I plan on bagging it as soon as I get a new daily, probably gonna go with 22's to take away some of that wheel well space.

[@Drivingonsidewall]

Jeffrey Jones okay there you go. I'm going to bag mine to cause I can't go any lower static. It'll look really clean. With 22s you going to be straight tucking

[@Evrychoice]

How low are you?

[@Drivingonsidewall]

PST performance I have a 7/8 drop on mine. I have like 2 inches of clearance. Check me out on Instagram Lowered_f150

[@christopherchavira2948]

Jeffrey Jones nice truck I was wondering why you C notched it and it was just lowered, thinking ahead I like that brother 👍🏾😎

[@22MrBigdog]

I have the 98 nascar edition, I want to do something similar with some nascar style rims

[@AllenJones506]

Danielbiggy22 that’ll look awesome

[@majadeep]

What's the bolt pattern on those wheels. I have an 03 f150 xl my bolt pattern is 5x135. Wondering if these would fit on mine. Thanks, nice truck

[@sanchetto_fishing3084]

They are the same lug pattern

[@raudellanderos5903]

Did u used a kit to lower in back

[@andref713]

Have you looked into engine swap on these?

[@fernandoavila6708]

I have a 1998 Ford F-150 single cab I want to drop it on a 2/4 drop with 20s ( what type of full drop kit will you recommend.?)

[@ozxxz]

just buy 2 inch drop springs in front and in the back you can get 2 inch drop hangers and 2 inch drop shackles

[@raulskii214]

how is the ride? smooth or hard with the 3 inch coil springs up front? i got a guy selling me some and also wondering what else is needed up front to lower it

[@AllenJones506]

You need different shocks for the smaller springs and you’ll need a camber kit for your upper control arms so you can get an alignment. It’s also a good idea to go ahead and change your ball joints. It’s actually rides really good!

[@GripItNRipIt82]

What are the mirrors off of?

[@theskronklbeep]

Hows the suspension travel? I'm looking for the most drop but I don't want to c notch

[@dq5713]

You can use leaf spring perch drops 2” and shackles 2” drop

[@sallypatino4237]

Where you buy the rims bro

[@PedroTorres-wq8ng]

Hey man! Nice lowering, what kind of lower control arms you have?

[@AllenJones506]

Factory lowers, DJM uppers

[@daves5243]

@@AllenJones506 Is it necessary to use aftermarket upper control arms or can yo just use a camber kit? Just ordered a 3/6 drop kit with c-notch plates for my 98 short bed and want to be sure I have everything needed.

[@AllenJones506]

@@daves5243 you should be good if you just use a camber kit. I had planned on getting DJM lowers but never got around to it before I sold it.

[@kevincofield3856]

Did you have to c notch the crossmember thats under the cab for driveshaft clearance.

[@AllenJones506]

Kevin Cofield no sir, no issues with that

[@kevincofield3856]

Thanks man.

[@monkey841000]

Nice setup I have the same truck looking to do a similar setup. Do you know the offset for the wheels ?

[@AllenJones506]

+35, seems excessive but Tucked nicely. Only problem I had was the center cap wouldn’t fit over the dust cover. Had to tweak it a bit

[@97lowbo]

nice I have a 97 extended cab I'm running a 3/6 as of right now but I'm going 3/9 in the future just had and under bed notch done so it'll clear nice truck btw what else you got planned for it?

[@AllenJones506]

Jonathan Duran it's currently my daily driver, but as soon as I get a new truck, I plan on bagging it on 22's. Going with a basic 4 link probably, still need to do some more research.

[@97lowbo]

Jeffrey Jones it'll sit nice I want to do f250 platinum tailgate and rear bumper and taillights then paint but for bagges won't you have to do a stepnotch?

[@AllenJones506]

Jonathan Duran yea, gotta step notch, cut out the bed, p

[@AllenJones506]

Relocate gas tank, tub the firewall, all kinds of stuff. It will all be worth it when it's layed out! Lol

[@97lowbo]

Jeffrey Jones real talk especially if it's done properly it'll ride great and just like the saying do it right the first time. lol props man can't wait to see that video when it's all done 👌

[@spencerwitty838]

Anywhere I can see more pics of this truck?

[@AllenJones506]

spencer witty instagram - ajones506

[@ashtonpray6878]

What rims are those ??

[@dannycraig7920]

I have 2002 ford f150 with a set of 20 on it I fixing to drop mine 4 in the frort and 8 in the back

[@AllenJones506]

Danny Craig sweet, you doing springs and spindles in the front?

[@ceremodelrepairllc.675]

Do the emblems fit on the same holes as the old ones ??

[@AllenJones506]

Herbert Lozoya no, had to trim the 09+ mounting holes off, ground them down flush and just stuck them on with 3Mdouble sided tape.

[@GeraltOfRivia99]

hey can you tell me what type of wheel adapter you need to fit these rims? i imagine its hard to find rims to fit this bolt pattern

[@GeraltOfRivia99]

also what offset are your rims?

[@AllenJones506]

I searched for months before I found these. They were 20x9 with a +35 offset. I didn’t have to run adapters, these came in my lug pattern

[@GeraltOfRivia99]

@@AllenJones506 Thanks! im going to get the EXACT same rims accept the offset im going with +10 so they kinda stay inline with the fenders and dont go to far inward

[@GeraltOfRivia99]

@@AllenJones506 as well another question. i saw your rims for sale online and i was going to buy them but it said they fit 5x135 and 5/139 or something like that. so that would still work with my 02 f150?

[@gersoncontreras9399]

What time r those???

[@josssgarciny6723]

How u lower in front how much cost to u for that? Nice job a like

[@AllenJones506]

$229 for control arms $150 for springs $100 shocks

[@mentallyunstable5149]

Make more videos ✅

[@raudellanderos5903]

How u lower in the back i have 1999 f150

[@AllenJones506]

Raudel Landeros flip kit, c notch, drop shackles

[@octavioabundes613]

Jeffrey Jones which shackles did u use

[@Blanco_5.0]

Some 24s or 22s would look nice on it.

[@cristianleyva1663]

What flip kit do you have

[@AllenJones506]

Cristian Leyva DJM, went with it because it has adjustable pinion angle

[@moisessanchez9294]

What do u mean n crown suspense

[@AllenJones506]

Moises Sanchez Crown Suspension, it’s the company that makes the coil springs and shackles.

[@gaelarellano8580]

Did u cut the bed ??

[@AllenJones506]

Gael Arellano I did not, the rear axle only made contact on big bumps, but it was rare

[@codyturnbo5980]

is it an 8ft bed? if not what size

[@AllenJones506]

Cody Turnbo just a standard short bed, 6.5ft I think.

[@codyturnbo5980]

Jeffrey Jones ah i've been thinking about lowering my truck it's a 01 reg cab and not sure how it would look with the long bed and what motor is your truck have

[@AllenJones506]

Cody Turnbo check out the Garage X KZbin channel, they put a 4/6 drop on a long bed f150. My truck is just the 4.2L V6, wish it was a V8, but I like the gas mileage I get.

[@codyturnbo5980]

Jeffrey Jones yeah that's what my ol girl has as well great motors and i will do thank you for taking the time to talk to me appreciate it

[@tonymendoxa8398]

What are those rims call ?

[@AllenJones506]

Tony Mendoxa Dub Rio 6

[@coyoterob2839]

Needs bigger rims their tiny

[@DUDEfreestyle]

Are these year of f150s reliable??

[@colinallen5151]

Outdoors&Cars no they are not. i own two of them.

[@SnowBisCute]

Colin Allen no they are not? My ass 4.6 and 5.4 2v’s are very reliable engines

[@AllenJones506]

Mine had a 4.2, bought it with 43k miles and sold it with 110k miles. Other than replacing the coil packs, I never had a single issue

[@danielgarcia9095]

They are very reliable especially the 2v 4.6 and 5.4 now the 5.4 3v have their issues but nothing like having to replace the transmission or motor

[@Marioo214]

Yes had mine for 7 years no issues 4.6L

[@TrulySzn]

Is that a ligtning

[@AllenJones506]

Riot HD I wish, just a V6

[@angelvaldivia5562]

aye bro do you wanna sell it ?

[@AllenJones506]

Angel Valdivia sold if a few years back man

[@nmspredator1728]

Got instagram?