Lowered 4/6 GMC Sierra on 22s

[@diegosalazar6197]

This video is hella helpful bro. Planning on doing this exact drop and wheel spec now 👍🏽✊🏽. Your truck looks good homie

[@Beauyo]

Diego Salazar Thanks man!

[@mckinleymckeehan7511]

Looks great brother, nice ride. Thanks for sharing with us.

[@xvvau-_-]

I have a 4/6 ihc suspension drop will I rub with my tires they are exactly like yours 22s with same tires

[@1607josh]

This is awsome. Nothing against jacked up trucks but there is not much on here for level/lowered trucks. Thanks

[@gotagofast_srt4]

Looks real good man! Thanks for makin a vid of it. Ill be dropping my 07 Silverado pretty soon. Thanks again

[@duessa8847]

Sharp truck brother. Do you know the part# for the drop kit?

[@Texas_Cruiser]

Howdy from Texas. I'm also looking at this body style Sierra and doing the exact same setup but with some GM or even billet wheels. Thanks for putting this up. The other comments answered a lot of my questions too. What else you plan on doing? Exhaust and headers?

[@Rjay_22]

Love it. Doing this drop to mine but probably going with 24’s.

[@bobbygamble9483]

This was a good video. If you still have the truck can you share some updates.

[@JC-qf2fd]

how much did it cost for everything

[@victoralvarado6846]

Do you feel like you might need a c-notch or a 2 piece driveshaft after the drop? I’m looking into lowering my truck 4/6 as well

[@Beauyo]

Victor Alvarado Not at all, I never hit frame or anything and I live in an area with horrible roads. These trucks have plenty of room with a 6” drop, I feel like I could go 7 and still be alright.

[@victoralvarado6846]

Beau Fontenot nice bro that’s all I wanted to know, thanks btw!

[@michaelleal7989]

What size tires on them 22's

[@alfredoviera5364]

Would you happen to know where to find the Denali hd front end for that model been trying to find it

[@Beauyo]

Alfredo Viera I don’t man, sorry

[@HIDALOKO69]

Do you have any front end alignment problems? NICE TRUCK!!!👍👍

[@Beauyo]

HIDALOKO69 nope, all in the green!

[@HIDALOKO69]

@@Beauyo Thank you!! Im looking to drop my chevy Looking all over internet for reviews facts etc, thanks again!! 👍👍👍👍

[@iletmynutshang9404]

the truck is nice you should get some white lights in the front it’ll look way better

[@Ricktwk1212]

Do you remember the part number for that kit I’ve been looking but is showing me few kits I want make sure I get same as you did .. very nice man

[@joaquinpuente2532]

How do you feel about running a 2 piece driveshaft? How close is your stock drive shaft to the crossmember, has it hit?

[@boosted_s1979]

If you don’t mind could you send me the link to the kit you have installed

[@robertharper2140]

Thanks.. are these wheels the gun metal or hyper silver color?

[@zacharysavoy3551]

What size drop do you think would have to be used to fit 26in GM reps ?

[@abasabas3051]

Can you go on like any kinda steep driveways? Or anything steep?

[@Beauyo]

Abas Abas i approach steep areas with caution lol, I’m not gonna hit them head on, you learn how to manage a drop. But with this drop on this model truck it’s pretty city friendly, I don’t usually have problems, my lower lip under my front bumper scrapes sometimes.

[@josebarragan9223]

What's the floor clearance after the drop

[@wilcast1157]

Do you have a part number for that lowering kit?

[@JoseLopez-km4zj]

Would a 4/6 drop look on good on a gmc sierra 2018 on 20s

[@urbanoornelas2323]

What kit is this

[@gersonvelasquez8528]

That's the drop kit I want. Thanks for sharing with us 👍 Nicr truck bro...

[@vlonexx1961]

Could you do 24’s on the 4/6 drop without rub?

[@Beauyo]

josh dyer2 I’m not gonna lie and say yes since I haven’t tried 24s on this drop. But I would think you could, I feel like I still have a lot of room to turn and what not. I bet if you ran a skinny tire just to be safe on 24s you wouldn’t have a problem.

[@PanchoPistolas45]

josh dyer2 i doubt it. Unless you run rubber band tires. I’m running 3/5 on stock 275/55/20 and I rub on big potholes front and back

[@vlonexx1961]

Xavier i might just go with a 3/5 drop on 375/35/22 im trying to find the right drop with what I got for tires and rims without rub

[@Beauyo]

josh dyer2 I’m running 305/40/22s and I have no problems with this drop at all. If I hit a pothole or a big dip in the road the front will barely rub, but not to turn or anything, and I have zero clearance issues in the back.

[@hiojaryenrique8092]

Is you truck 2wd or AWD ?

[@Are2Squared]

Sweet truck! I have had at least a dozen lowered trucks, thinking about lowering my 2018 4x4 Sierra. I am apprehensive with it being 4x4, but since the suspensions are basically identical anymore should be easy. I see a lot of other 4x4 being dropped as well. Idk

[@jerrygarcia2178]

BEAUTIFUL TRUCK LOVE IT !!!!!

[@franky7537]

Do u rub with those tire size on those 22 ???

[@c117ls7]

I've got the same truck and am about to drop it. It's a daily so how does yours ride compared to stock?

[@nunajobiz794]

That looks perfect nice truck.

[@eddiecano6308]

Badass truck bro do u have any clearance issues like scrapping on speed bumps ,potholes, driveways etc

[@Beauyo]

Front tires rub a little up top only on big dips in the road. Nothing else really.

[@acpropulsion6191]

Looks great man. In the stock height pic, do you have a leveling kit on it? Looks like the back is sitting lower than stock. Take care.

[@Beauyo]

Jefferson Ruboix Thanks man, I had some 2” drop shackles that I picked up from a local parts store, and I also removed the blocks when they were installed, giving it a little more of a drop.

[@acpropulsion6191]

Beau Fontenot I have a 2011 and you’re right, no vids showing this model gmc with a drop kit. Thanks for uploading.

[@edgargonzalez6815]

Does the back hit on the diff

[@ivanluna7883]

What tire size u have on the 22s

[@mvp8026]

Does it drive smooth with out the c notch?

[@user-lm5ix6tj8n]

Hey big dawg , did u have to cut the bed for that drop????

[@Beauyo]

No sir, I didn’t cut anything. I did have the lift hangers to get 6”.

[@user-lm5ix6tj8n]

Thanks bro , truck looks clean af

[@Philthyy]

Ey man can you send me the link to where you got the drop kit? I’ve been looking but I can’t find anything

[@Beauyo]

www.suspensionsuperstore.com/2007-2013-chevrolet-silverado-1500-extended-cab-4-6-deluxe-drop-kit-mcgaughys-34015/

[@Rodriguezlegacy]

What are all the parts you ordered?

[@ericpage119]

What size tires are you running?

[@Beauyo]

Eric Page 305/40R/22

[@ericpage119]

@@Beauyo Looks good. I'm lowering '14 silverado next week but I'm stuck deciding between the 3/5 or 4/6 with 275/40-22s. I may end up setting it for 3/5 for now because i dont want rubbing or bottoming out. Then decide on the extra inch later on

[@Beauyo]

Eric Page awesome man, just get you an adjustable kit and adjust as you go, it’s very simple to adjust. I’m not sure how the ‘14 Silverado sits, but this truck has plenty of room for 4/6, I honestly feel like I could go 7” in the back and be fine without a notch

[@ericpage119]

@@Beauyo Ive had the McGaughys adjustable kit waiting on my truck to go in the shop since i got rear ended 3 months ago so im pretty anxious by now to get it on. Ill be lowered in 11 days and counting lol

[@themojangguy56]

What’s your tire and wheel size?

[@harveyr2546]

Which part of Louisiana you stay in?

[@gregmoore4923]

I was wondering the same thing. In from Youngsville, La

[@82richies]

Bad ass what size tire on the 22s

[@Beauyo]

305/40/22

[@xvvau-_-]

Do you have any rubbing issues ?

[@pedroleos6646]

What is your offset, I deliberating on 3/5 or 4/6 just attempting to find out tire size and offset to run 22’s

[@Beauyo]

These are 305/40/22 with a 24mm offset I believe, stock Denali 22s

[@pedroleos6646]

Beau Fontenot much appreciated

[@pedroleos6646]

Last question did you have to c notch it and do the tires run?

[@Beauyo]

Pedro Leos I did not have to notch, it doesn’t even come close to bottoming out in the back, I feel like I could go to 7” and still be ok without a notch. I have no rubbing issues. All I did was go with Belltech shorter shocks in the back for a smooth ride.

[@pedroleos6646]

Beau Fontenot ok bet thanks

[@kylehippensteel9339]

I’m about to order a drop for my 08 CC Sierra Was set on a 3/5 drop with 24in reps like a 295/35/24 tire But seeing these 4/6 drops makes we want to reconsider My only concern is being to low I live in Florida but I drive this truck all over the north east for work. I’m in new York, Maine, Massachusetts ect most of the year and I do a lot of highway I don’t wanna be to low Any input is appreciated your truck looks sick

[@kylehippensteel9339]

I’m going with the ICH kit. Seems to have amazing feed back. What also pushes me to the 4/6 is there 3/5 kit only comes with lower control arms The 4/6 kits and lower come with upper and lower control arms But I drive this truck a lot on the highway all over the country so want to be smart about this ihcsuspension.com/product/2007-2013-chevy-gmc-1500-2wd-4wd-4-6-lowering-kit-ext-cab-crew-cab

[@LouieLoui]

@@kylehippensteel9339 did you go with the 4/6 if so any regrets? Was looking at doing this to my 14 Silverado

[@kylehippensteel9339]

@@LouieLoui love it Ended up buying a tundra for traveling up north. Will probably be going lower on mi Sierra now

[@MINAR3L_GR3Y_2V]

Did you have to get a 2 piece drive shaft?

[@Beauyo]

Nope

[@travismaxwell9115]

Nice truck, my man.

[@xxpitbullgaming6384]

Is the front and back evenly dropped

[@Beauyo]

Almost perfect, I wish the back sat a little lower, but I’m good with it.

[@xxpitbullgaming6384]

@@Beauyo so I should get 4 /6 on my chevy silverado Lt 2013 or 3/5

[@Beauyo]

XxPitbull Gaming If you plan on doing one or the other, I would do 4/6 because if you go 3/5 you will just wish you went 4/6. Or just get an adjustable kit, my rear can go 4,5, or 6 inch drop and all I would have to do is change the spring up front to adjust from either 3 or 4”

[@Mr_Yesqq]

Glad you changed the grill to black the chrome one looked horrible 😅

[@edritchie270]

Looks great bud !

[@TheEaeduardoaurioles]

How much was ur drop kit?

[@Beauyo]

eduardo aurioles It was around $700

[@blakeblanton3121]

Where u get the front tag from

[@Beauyo]

I used to work at a design shop and I had made it there.

[@ramonj1552]

That thing looks bad ass

[@youssefbenhmida3568]

Link to kit?

[@hiojaryenrique8092]

Is it a rear wheel drive or all wheel drive Denali ?

[@Beauyo]

Hiojary Enrique this is a rear wheel drive Sierra

[@hiojaryenrique8092]

Thank you

[@compacheo603]

will u max it out at 6”? for the rear ?

[@Beauyo]

Compa Cheo with this kit, the hanger gets maxed out at 6” yes. But if you are asking if I can go lower, definitely. I could go to 7” without those hangers and still be fine without a c notch.

[@Angel-ft8bv]

@@Beauyo how much did installation cost

[@jimmielittle877]

So 4/6 for 22" and 3/5 for 24"?

[@Beauyo]

You can have 24s with a 4/6, just depends on tire size. Something like 295/30/24 would work.

[@MrBuddy7798]

sweet , i have a 17 denali crew cab i am about to slam and procharge

[@AlexLopez-kp1wf]

My friend did a 6” drop in the rear of his 09 sierra and it sits way to low, we tested some 22” wheels with 285/45/22 and it was rubbing bad. Do you know why his was rubbing while yours looks like a good stance? Did you have helper bags? Or anything to lift it since crew cabs are heavier then single cabs so maybe thats why it sits lower

[@marioarizola4921]

Was wondering the same thing. How do you get away with a 4/6 drop with stock Denali tires 285/45/22 without rubbing

[@roygarcia3853]

What’s the width of the wheels?

[@Beauyo]

9” I believe

[@jesusmarquez9948]

Hey Beau Fontenot nice cheyenne you got there man nice

[@rafaelmercado5771]

What tire you got

[@45HEATERZ]

I did a 4/6 too and my chupaweenies looks lower in the front

[@Rjay_22]

Chupaweenies 😅

[@joeyloewen8712]

Did you c notch it?

[@Beauyo]

Nope

[@jrcisneros7167]

Beautiful

[@chapoduran1978]

I’m planning of dropping my truck tomorrow I’m running 22s on 305/40/22 and I’m think of a 3/5 or a 4/6 what do u recommend I have a 2007 Gmc new body style single cab

[@Beauyo]

4/6 looks better, if you go 3/5 you’ll always be tempted to to drop it more.

[@bladimiralvinez9410]

Hey brother very nice truck enjoy it. I love it 👍👍👍👍👍👍👍👍

[@ATVERKING13]

What size tires? I have a 2010 Sierra 4wd and I want to run 285-45r22s just want to be sure they'll fit stock height truck

[@Beauyo]

Drew Witherspoon 305/40/22

[@ATVERKING13]

@@Beauyo thanks for the quick reply the 285-45 should fit stock height I'm thinking it's only a half inch taller than yours and your running them on a lowered truck!!

[@Beauyo]

Drew Witherspoon definitely, you shouldn’t have a problem

[@210gallo2101]

What size tire u running bro?

[@Beauyo]

210gallo2101 305/40/22

[@Mimstrips]

What shackles u running bro ???

[@Beauyo]

Stock shackles man

[@Mimstrips]

Thought so because I got a 6” drop on mine with shackles n it sits way lower now I gotta roll my fenders to clear rubbing issue might just put the stock shackles back on it

[@chevy561]

Your truck looks sick as fuck bro! Shit is sitting perfect! I have the exact same year truck, 2wd crew cab in almost the same color. Did that Kit come with the upper and lower control arms as well, Or do you not need them because of the drop spindles?

[@Beauyo]

Felix Pino Thanks man, appreciate it! The kit didn’t come with them, I’m still on stocks.

[@chevy561]

Beau Fontenot Oh ok. I was looking at the kit from ihcsuspensions.com and their 4/6 drop kit comes with everything for $795, BUT, I might have to go with a 2/4 drop instead because I want to clear 26s (unless 24s would fit on your 4/6 drop)...

[@truckin_nation6703]

Did you had to do a C-Notch or Is It hitting the axle ?

[@Beauyo]

I didn’t have a C-notch. It would only hit frame on bad bumps or potholes. I would recommend a notch if you load the bed down or pull a trailer.

[@enriquechavez6500]

Did you have to cut your frame ?

[@Beauyo]

Enrique Chavez no sir

[@alfonsoleyva1243]

Nice truck bro! But not gonna lie it looked better stocked. Nice truck tho👍

[@LucioCornejo-xy4qj]

The video was good and everything, but the truck is still lifted do a 4/6 drop

[@LucioCornejo-xy4qj]

With 22s

[@pete7062]

what size tires on that?

[@pete7062]

nvm found the info in comments. nice ride

[@chaka5589]

Looks Great... Go for that 5/7 Drop tho...

[@wilcast1157]

Nice!

[@wilcast1157]

Do you have a part number for that lowering kit??

[@petermorales9880]

Check out ihc suspension

[@Moneyyygetterrrr13]

6/12 drop

[@jose-editz6380]

How much did it cost you to do that drop

[@davidjzamora01]

What tire size are you running?

[@koolmodee2449]

Did you do a C notch?

[@Beauyo]

@@koolmodee2449 I didn’t, but I highly recommend one.

[@elwerogaming1331]

What size tire u got?

[@Zacatecano48]

Do you bottom out at all?

[@Beauyo]

Anytime I had a load or I hit a good pothole I did.

[@CronusMAXX]

2 piece drive shaft? Or stock

[@Beauyo]

Stock.

[@aldovicencio4804]

Any camber problems ??

[@Beauyo]

Aldo Vicencio none, got a perfect alignment too

[@aldovicencio4804]

Beau Fontenot thanks bro I really appreciate the info

[@CarlosMorales-bi5hg]

What tires u running?

[@Beauyo]

305/40/22

[@CarlosMorales-bi5hg]

Thanks.