All details can be found here: azproperforman... Installing a 5/7 drop onto a '98 Silverado (same basic process as 4/6), as well as brakes and 18" American Racing Torq Thrust wheels.
Пікірлер: 191
@sehtime36014 жыл бұрын
Love the way these are being filmed, all the little mechanic's tricks like putting tension on that ball joint to take the nut off, and the pulling the cotter pin out are things that other videos don't share. Those are the things that you learn from years of being a mechanic and working on cars without realizing it. New comers will appreciate all the tricks you share from years of experience.
@smokeitloudbanks Жыл бұрын
I have the same exact truck same year and color it came with a 4/6 drop had 150k miles best truck I have ever had love it and runs good
@aaronchristoph22983 жыл бұрын
Thanks for the video boys! Helped me a ton in dropping my obs chevy. Good tips and tricks!
@obslife19854 жыл бұрын
Tell the c10 kid to start making videos again lol I was wondering what happen to him.
@jaredshoemaker91962 ай бұрын
Thanks for sharing. You made is easy to understand the process. Take Care!!!
@artysmotorsports4 жыл бұрын
That actually looks pretty clean 👍
@jruiz17244 жыл бұрын
What size tire are you running on those 18’s
@danielaruta88164 ай бұрын
Very informative video. Consider adding light so everything is easier seen. It’s dark under there!
@farboy43043 жыл бұрын
I thought that was the C10 kid. Bring the channel back c10 kid!
@DrivenbyGears4 жыл бұрын
Very nice 👌don't froget the extra bolt on the shock extenders or they will eventually flex.
@albertybarra79683 жыл бұрын
Extra bolt?
@DrivenbyGears3 жыл бұрын
@@albertybarra7968 there is a bolt in middle
@albertybarra79683 жыл бұрын
@@DrivenbyGears its a small hole not even the same as the 2 big ones
@DrivenbyGears3 жыл бұрын
@@albertybarra7968 I know that I've installed these shoot look at my channel for God sakes
@DrivenbyGears3 жыл бұрын
@@albertybarra7968 www.carid.com/belltech/1994-chevy-ck-pickup-suspension-systems/belltech-shock-extension-kit-3451150504.html?relationshipId=3811920394&childId=3451150505&offermpnid=1435816&view=040242&gclid=CjwKCAiAxKv_BRBdEiwAyd40NzOfKOnj6VzpLwqW7tTwQdwOrlXtncpa7jcHDqXsKo9jeHZ4PDmJlhoCNB0QAvD_BwE here you go look at this. See the hardware.
@grandparolie3 жыл бұрын
Perfect stance I love it.
@boxerfan23 жыл бұрын
Just once I would like to work on a ride as clean as this one. All the rides I work on are rusty and muddy.
@obs_vicc41453 жыл бұрын
Went from c10 kid to c10 middle aged man Ughhh life hits everyone
@rjcarrillo64433 жыл бұрын
Looks badass 🔥🔥
@superc43084 жыл бұрын
Hey was ' nt that a cameo from the C10 kid ✌
@tkn24s4 жыл бұрын
Beautiful truck.! 👌🔥
@ivanjimenez88683 жыл бұрын
Belltech shocks are ok, since it’s owned by KW idk why they don’t make a stiffer mono tube shock for us street truck enthusiasts that like lowering our trucks.
@jang69693 жыл бұрын
Nice work guys! 🇨🇦
@p.b.sHUNTING4 жыл бұрын
Everything i bought from belltech for my truck (hangars/brackets) were a disaster. Not a single bolt hole was correct and 3 bracket sets the spring wouldn't even go into the pocket.... we had to use 2 sets to make 1 that we still had to open holes up to get in place. Pinion hardware broke while suspension settled and had to immediately get a parts store setup. Belltech's response..."nothing we can do" jegs made it right and billed them for lift time for all the mess I had to go thru. Belltech is a joke that makes parts out of the country and doesn't quality check.
@cencoast_7.3404 жыл бұрын
Damn, I thought they were some of the better parts. Luckily DJM is like 30 min from me, I’ll go that route.
@carlosgonzalez-kh8gm2 жыл бұрын
What is thw website for jegs i wanto to order my drop too
@aronkaspar63693 жыл бұрын
Easy when you have a nice air conditioned shop with every tool you can imagine.
@AZProPerformance3 жыл бұрын
Unfortunately it's not AC, but wish it was! We did this with tools that most car guys would have in their garage as well, minus the lift. With that said, I have done numerous in my own garage over the years just as easily.
@robbarmstrong87022 жыл бұрын
Super Clean!! Love the drop and the kit makes everything pretty straight forward. #RobbArmstrong
@SurlyMike4 жыл бұрын
That looks pretty sick. Can you share the wheel and tire size please? I doubt that I would add that brake kit to my truck but It would be nice to know if it effected the wheel offset.
@Mark-oh7ec2 жыл бұрын
There's a link in the description with the complete build bro 🤜🏽🤛🏽
@patriciocarmona1809 Жыл бұрын
bruh, much needed video lol
@fuelinjectedduck29644 жыл бұрын
Love the obs videos.
@smokeitloudbanks Жыл бұрын
All I watch is obs builds and other years cuz there is ts enough obs videos if there is a obs video I don't care what it is I'm watching it
@miguelangelsalazar16758 ай бұрын
Aahsome classic luv the the drop😎🙏 ready to cruise ❤ bow tie 4life
@dawsoncopeland14234 жыл бұрын
Whats the tire size. Ie got an 88 OBS and im not sure what wheel size and tire size I want to run. I put 2in shackles in the rear but i may go lower. Im fixing to build a 4.8 vortec motor to put in the truck. Im also changing the grille. Possibly a roll pan and doing the tailgate handle flip
@badboyr66 Жыл бұрын
I appreciate you list the info on the build..but didn't list wheel backspacing
@ivanvargas85314 жыл бұрын
Clean work guys!!! I
@mikemichaletz70414 жыл бұрын
I have a 1977 P-20 step van lowered by cutting one ring in front of the spring and took the overload springs out and kept the regular leif pack and put air shocks front and back! My question to you is do they make a 5 lug pattern swap for front on back? I did buy a 6 bolt disc brake setup from a newer truck but was looking to see if there was a swap kit for the front in order to bag it?Thanks Guys,Mike
@dubworldvwadventures Жыл бұрын
Wish you had a before image side by side.
@sidneibueno86474 жыл бұрын
Fantastic! Show, São Paulo Brazil.
@Livemusic18002 жыл бұрын
Wish mine was that low/stance. 😕 hopefully soon.
@BurningSteel693 жыл бұрын
drop spindles and lowering blocks is all you really needed --
@AZProPerformance3 жыл бұрын
lol... Glad you have the secret parts list for a 5/7 drop. Good luck getting a 5/7 drop out of your spindles and block.
@smtbigelow3 жыл бұрын
putting blocks in the rear of a truck with the axle on top of the leafs will lift the truck, not lower it.
@xxharrisonwolfxx69243 жыл бұрын
I have 20’s in the back and 18’s up front
@CarlosSanchez-cj5wo4 жыл бұрын
Did you have any problems with pinion angle?
@funguy79793 жыл бұрын
What do you recommend on this.... **97 Sierra single cab long bed V6 about to be 350 with 5speed manual**. I want to add add-a-leafs to my suspension and then lower it. Why? Because it's a work truck so I want to have added load capability of the leafs but be able to lower it....if possible. I order 15x10 (3in backspacing (-63mm)) with 275/60r15. I want to have a nice lowered, not slammed, stance. Fender flares will be ordered once I see how the wheels fit. Is it possible to lower after installing add-a-leafs?
@manuelsaavedra32202 жыл бұрын
How much it cost a full kit like that one ??? Brakes and lowering kit…. I have a 95 GMC Sierra step side bed…
@jesusestrada46992 жыл бұрын
What size tires back side ? What size of whells?
@teodociofortanel7882 Жыл бұрын
nice work can i put s10 springs on 1995 chevrolet to lower the front
@dylancopeland61444 жыл бұрын
I bought my 91 chevy already dropped. It has a 4/6 djm kit but instead of drop spindles it has 2" lower control arms. Is there a benefit to changing the spindle vs the control arms?
@scottydoesntknow2544 жыл бұрын
Control arms are better in my opinion because in most cases it keeps stock geometry.
@DrivenbyGears4 жыл бұрын
@@scottydoesntknow254 i agree keep em the spindles limit travel in my opinion vs stock ones.
@rolandosanchez36644 жыл бұрын
Ok where are you guys so you guys can drop my truck?? Thanks! 😊
@chic0_794 жыл бұрын
What size are you running on those 18's
@flipcarrizales77154 ай бұрын
Did you use any shims in the front for alignment on a single cab 96 gmc on 5 inch drop
@CenaJ675r Жыл бұрын
Am I going to run into issues running this kit with a Turbo400 swapped transmission and shorter driveshaft?
@yomommajumprcables3 жыл бұрын
Yes Sir that's the only way I ride...LOW
@Clappedoutprojects Жыл бұрын
Did you have to notch the bed we’re it sits on the cnotch on the frame ?
@fbbc64952 жыл бұрын
Nice
@davidfink97294 жыл бұрын
Fucking awesome video again. Got a question - how does the belltech 4/6 drop go? In other words same steps as this video?
@ympmartinez20062 жыл бұрын
Is it true belltech spindles make front wheels stick out 1/2 inch?? Nice truck🤙
@AZProPerformance2 жыл бұрын
Thanks! Yep, they sure do push the wheel out 1/2", which is why we use these spindles now. azproperformance.com/products/react-2-modular-drop-spindles-88-98-c1500-8898-001?_pos=27&_sid=68198c54b&_ss=r
@ympmartinez20062 жыл бұрын
@@AZProPerformance thanks for responding. I wish I ask u before purchasing the belltech kit where I bought it don’t accept returns.😬 but I haven’t installed in the truck
@derekdavis21923 жыл бұрын
I'm doin a Belltech 4/6 kit on a 91 I just bought. On the reg. cab trucks, do u still install the transmission tailshaft spacers or is that for ext. cabs only? I know the carrier bearing spacer is only for ext. cabs, but wasn't sure on the trans. tailshaft spacers. Thanks.
@AZProPerformance3 жыл бұрын
Leave driveline as is, and we leave them un touched on regular cabs.
@derekdavis21923 жыл бұрын
@@AZProPerformance thanks man
@moz0886 ай бұрын
@@AZProPerformance what size tire are you running on these 18” wheels
@johncalhoun80113 жыл бұрын
How much does a Lowering Kit cost for my 91 Chevy Short Bed. Including Installation?
@johncalhoun80113 жыл бұрын
Hello 🙋🏿♂️
@leviathan02323 жыл бұрын
@@johncalhoun8011 Those kits are $800-$900..Installation would probably be around the same if not a bit more.
@johncalhoun80113 жыл бұрын
@@leviathan0232 Thank you Sir 👌🏿
@leviathan02323 жыл бұрын
@@johncalhoun8011 no problem. Here’s a link azproperformance.com/products/belltech-5-7-drop-kit-88-98-c1500 You can also buy direct from Belltech. I just ordered mine lol
@johncalhoun80113 жыл бұрын
@@leviathan0232 Got it! Thank you Sir 👌🏿
@Jeol7212 жыл бұрын
What rims are those?
@rolandmack13 Жыл бұрын
Could you do this to a c2500 obs truck with the same kit?
@thebestpainter7343 жыл бұрын
Can you do my Chevy 2002 and how much? I really want my truck looking just like that ..low..low...low👍👍
@AZProPerformance3 жыл бұрын
We can and just give us a call @ 480-420-8175. We are currently booked until Jan. 2021, but can do after the first of the year.
@michaellopez9684 жыл бұрын
I can use factory control arms for drop spindles?
@ronhellengreen59683 жыл бұрын
Were can I get 3 inch drop spindles for my 94 Silverado 1500? The only ones I've been able to find is 2 inch.
@AZProPerformance3 жыл бұрын
Nobody makes one unfortunately. Just the 2".
@highwayjunkie72924 жыл бұрын
Can you do the 13inch brake kit without the drop spindle
@allanb32224 жыл бұрын
Yes you can, you'll just need larger wheels to clear them.
@MARKC0R32 жыл бұрын
Do you need to cut the bed to fit where the c notch bracket goes above the frame?
@AZProPerformance2 жыл бұрын
You can, yes... we have done it both ways.
@G_marvelous852 ай бұрын
Will this same kit work on my 93' 2 door yukon?
@adolph2892 жыл бұрын
nice
@joseg402 жыл бұрын
Do you guys sell a drop kit for a 1996 Chevrolet 1500 ? it’s all stock looking for a 4-6 “ drop it currently has 20” wheels on as well .
Do you know if there’s anyone who does this type of work in NYC if so lmk please 👍I have a Chevy 1998 that I want to lower
@keepinitrealTRUTHFUL4 ай бұрын
Have 2000 chevy express 1500 what do u recommend
@Leobuhh.4 жыл бұрын
Where can I find this set up can’t find page
@5809Alejandro3 жыл бұрын
Can you please let me know wats the exactly wats yhe wheel set up and tires for the fronts and rears please i love the stand of this truck
@AZProPerformance3 жыл бұрын
All details can be found here: azproperformance.com/pages/98-silverado
@colbyhale80543 жыл бұрын
How can I just drop the front 2 inches. I have an 02 Chevy Silverado
@AZProPerformance3 жыл бұрын
Just a pair of spindles. We sell the BellTech ones.
@groundedgarage57314 жыл бұрын
What size tires are on this truck?
@AZProPerformance4 жыл бұрын
245/40 and a 275/40
@kylejennfletchergregory2169 Жыл бұрын
do you have to cut the bed?
@thecookfamily86072 жыл бұрын
How long does it take?
@gregoryjones97542 жыл бұрын
Did you reinstall the bumps stops in the front and rear?
@AZProPerformance2 жыл бұрын
Only rear, fronts get removed.
@hectorleon4104 Жыл бұрын
How much is the kit complete
@modlist61293 жыл бұрын
Is that color pewter grey?
@gerardakau45042 жыл бұрын
I noticed there was no shock in the coil can I do that??
@AZProPerformance2 жыл бұрын
There are shocks installed.
@samuelmontecelli95252 жыл бұрын
Are the rims 18x9?
@texasmadewhips834 жыл бұрын
What’s your contact info how much for the brake kit
@kevingarroofficial24713 жыл бұрын
about $2k
@2dacta6352 жыл бұрын
Busco ese kit de suspensión
@lifestyletruckin78065 ай бұрын
They still need experience I would did everything with out removeing the bed
@AZProPerformance5 ай бұрын
Yeah, we don’t know much about trucks, you caught us. 😂 Why work harder, when we can work smarter being we have the means to easily remove the bed. If we need any tips or tricks, I’ll be sure to reach out to you. 😉
@bartman1078ify4 жыл бұрын
What size wheels are those and make. I want those for my truck.
@wadeepps34433 жыл бұрын
hey bro, the wheels are called torque thrust 2s and the brand is american racing wheels, check out there web site, im guessing the sizes are 18 x 8 in the front and 18 x 10 in the back, hope that helps, i have some of these on my obs
@joshuacanada92082 жыл бұрын
how long is that bed?
@GueroObs Жыл бұрын
What color is that, color code?
@johncalhoun80113 жыл бұрын
Hello!
@jrperez77734 жыл бұрын
Where do you order parts
@josevargas98442 жыл бұрын
How can i get the kit? I need the 4" front and 6" in the back.
Hey guys! Are those brake kits available for abs brakes?
@allanb32224 жыл бұрын
The truck they installed the brakes on had abs.
@jrocha383ws64 жыл бұрын
Yea just watched the video.. pretty nice brake kit.
@danielalvarez61933 жыл бұрын
Can I run 454ss wheels (15s) with this break kit???
@AZProPerformance3 жыл бұрын
No, the 13" kit requires 18" wheels or larger. Only stock brakes will work in the 15" wheels.
@ryanspell3 жыл бұрын
Do they make a kit that can fit 15×10 wheels?
@AZProPerformance3 жыл бұрын
You can do 15x10 wheels on the back with this kit.
@salvadormontes10926 ай бұрын
Whats a good lowering kit without a c notch for a 96 4dr tahoe 2wd
@AZProPerformance6 ай бұрын
Belltech, and can get it right from us. azproperformance.com/products/belltech-3-4-drop-kit-95-99-tahoe-4-door-2wd-792?_pos=3&_sid=d895bf818&_ss=r
@TheMilkMan911x2 жыл бұрын
So you ran with no coil isolator at all?
@AZProPerformance2 жыл бұрын
No spacer on top.
@TheMilkMan911x2 жыл бұрын
Ok thanks for the reply, and Happy Holidays!
@775automotive93 жыл бұрын
I got the same drop but my rear end is so bouncy.
@AZProPerformance3 жыл бұрын
Try the Street Performance, as this is what we used with this truck. It is valved a little heavier. azproperformance.com/products/belltech-rear-street-perf-shock-lowered-88-98-c3500?_pos=1&_sid=610fbb585&_ss=r
@775automotive93 жыл бұрын
@@AZProPerformance thanks I will give it a try, can I use the same shock for both sides or are they different part numbers?
@AZProPerformance3 жыл бұрын
@@775automotive9 Same PN for both left and right.
@AZProPerformance3 жыл бұрын
Make sure you have shock extenders too. azproperformance.com/collections/belltech-88-89-gm-truck/products/belltech-shock-extension-kit-88-98-c1500-6652
@775automotive93 жыл бұрын
@@AZProPerformance I do have them somewhere lol, it’s been years since I did the drop. Another thing I realized is the previous owner must have or who knows, but on my leaf springs I only that 2 leads and that lower one. I have seen most trucks with atleast 3? Not sure if my leaf springs are also not got good anymore.
@dracoLoomis_2232 жыл бұрын
Can I lower my truck without cutting?
@AZProPerformance2 жыл бұрын
Yep, sure can. Check out the 2/4 drop. azproperformance.com/products/belltech-2-4-drop-kit-88-98-c1500-685?_pos=2&_sid=acea9db0e&_ss=r
anyone know who makes a 4/6 drop kit for a 97 k1500 4wd?
@justinwells29033 жыл бұрын
I bought mine from Summit Racing Belltech 6605 - Belltech Rear Flip Kit and Belltech 3920 - Belltech Torsion Bar Keys the choice of shocks is yours. This link will also help you: www.powernationtv.com/build/154/red-tide
@roncr72982 жыл бұрын
Where do u get the lowering kit from?
@AZProPerformance2 жыл бұрын
From ourselves... we sell the parts. Link for more details is in the description of the video.
@robertgarcia73583 жыл бұрын
Ever consider selling the truck I really want it
@AZProPerformance3 жыл бұрын
We did sell it, but sold before we could even advertise it.
@lovemendez54063 жыл бұрын
Where did you buy the kit?
@AZProPerformance3 жыл бұрын
From ourselves. azproperformance.com/products/belltech-5-7-drop-kit-88-98-c1500?_pos=1&_sid=be1070675&_ss=r
@rileycryer95722 жыл бұрын
Do the tierods hit the frame?
@AZProPerformance2 жыл бұрын
Nope
@sergiobernal37402 жыл бұрын
Does the front get shocks ?
@AZProPerformance2 жыл бұрын
Yep, sure does and did.
@johncalhoun80112 жыл бұрын
Where are you guys located?
@AZProPerformance2 жыл бұрын
We are in Mesa, AZ
@johncalhoun80112 жыл бұрын
Thanks
@GladiatorJT20Ай бұрын
Does it bottom out ?
@AZProPerformanceАй бұрын
Using the BellTech notch on a 7" drop, it can bottom out at times on large bumps. However, we have developed an under bed step notch to help with this a lot and add 2" additional travel. We also combine that with a drop kit too or available by itself. azproperformance.com/products/pro-performance-ultimate-drop-kit-88-98-c1500?_pos=1&_sid=5dd626284&_ss=r azproperformance.com/products/react-c-notch-88-98-c1500?_pos=1&_sid=28962dec8&_ss=r