Helping my friend mono leaf his truck and would help him sit lower It was a 1991 toyota pickup INSATGRAM @1995_nissan_build @91mini_
Пікірлер: 148
@dirtrusty72285 жыл бұрын
I used to "rig" my old Toyota like this. All my friends did the same. Most of us are still alive 30 years later. Live and learn.
@JManKillaBee5 жыл бұрын
The “how to” section is a great addition to your videos, entertaining and informative. I vote do more 👍🏿
@MarcoTrillion2 жыл бұрын
Those trucks look nice. It's awesome you're helping ur friends and others.
@xTinBenderX Жыл бұрын
Got a '91 base Toyota pickup brand new when I was stationed at Alameda Ca for $6995. Truck was so awesome! Same color like the Exhaust And Loweing another hardbody video.
@mitomr.twiceasnice43584 жыл бұрын
That Yota is nice.I think its my fav gen pickup from Toyota. Salute from Screwston TX
@tausilialoiai39293 жыл бұрын
Awesome job bro 👍 from Brisbane Australia
@bigzdabarber5 жыл бұрын
great stuff 👍🏼👍🏼
@juannavarro67575 жыл бұрын
Nice job bro looks firme that Toyota
@firstnamelastnameisallowed79435 жыл бұрын
Hey there I don't want this to come off as me hating or talking sh!t about your video at all even though it may come across that way. But I wanted to point out or make some aware of the issue/s about this. First would be stacking blocks like that is very dangerous to do. It's hard to explain on here but if you look up on KZbin what lowering blocks do to your springs there is videos showing what happens to the spring when it's got blocks in it. Idk if u have ever seen lift/lowering blocks that are more then 3 inches but they have a tapper to them so it will correct your pinion angle of the drive shaft witch is also very important! So u don't chew up u joints and get strange vibrations from the drive line. Doing it the way you did is more of a concern if he had to stop fast, or in an accident it can become a major issue of strength and staying together not to mention just axle wrap can make the driver lose control of the vehicle. I don't think he is going to be putting much stuff in the bed so weight won't be a concern really but I would strongly suggest looking into something like four links or going to off road web sites and finding blocks that are one piece and have the angle needed to correct the drive shaft pinnion angle. They make 6 inch blocks for off road trucks witch it's the same block if u want to lower a truck but six inches a a bit much!! Lol but again I'm not trying to talk shit I just wish someone had filled me in on some of this stuff when I was your age I could have avoided a lot of headaches!! But please do look up proper pinion angle and lower/lift blocks and how they affect your springs and truck drivability!! See for yourself on the videos so that way u can learn from them and not have someone like me explaining it poorly on here lol. Your on the right path though!! Get out and get your hands dirty and always be open to learn things everyday!! Besafe y'all!!
@humbleniss90565 жыл бұрын
Firstname Lastname is allowed thanks I appreciate it , my grind was running his truck like that so I just helped him lower it more and my truck is bagged so I don’t really have to worry about that stuff on my truck
@rafelitodjiadon280010 ай бұрын
What tipe of sunroof you put on the hard body
@griffofmx95409 ай бұрын
yeah thats such a dangerous set up only remove one load leaf from the whole pack and get a shop to completely flatten the whole leaf pack (should be a 7 - 8 inch drop) then add 2 to 3 inch blocks max without stacking would hate to see the blocks fall out down the highway over a bump and destroy this nice truck and possible hurt the driver plus ur leaf hangers will be higher off the ground aswell
@watever67425 жыл бұрын
I used a 4" angle drop block and removed a spring and it gave me a 5" drop total, still tucked 19x 9.5 rear and 19x 8s front, had to cut fender well and moved it up 3" to clear front tires tho. With air shocks.
@rauldelrio57344 жыл бұрын
Nice man and I got the same one 92 Toyota mini pick up TK
@Curtis19006 жыл бұрын
You did it smarter than me I just grinded those lil tabs off
@moneybagmando38825 жыл бұрын
Nice video bro ! Truck looks good how it was sitting
@maxc69632 жыл бұрын
what a good guy, i really hope you are doing well my friend
@ohhchiclets24642 жыл бұрын
Humble dude 👍🏼
@MaikeruX885 жыл бұрын
Fitment on point, how does it drive compared to two springs?
@jordanancelet83966 жыл бұрын
Ahh what a sexy Toyota, makes me wanna go buy a Datsun mini. Keep up the good content, wish you would post more vids 👍!!
@dirtrusty72285 жыл бұрын
It's addictive. I was out of the mini scene for 15 years then I picked up a '94 Toyota with engine problems. Since then I've built four more trucks. Now I'm looking for a Datsun 620.
@multigodofallful3 жыл бұрын
@@dirtrusty7228 did you ever get a 620?
@flyprincess696 ай бұрын
Sweet!!!!
@janderson37034 жыл бұрын
Always lending a hand to get low...Nice
@bbldrizzaay4 жыл бұрын
Aye Oside represent 👊🏻
@shanehart11233 жыл бұрын
Aestetic enthusiast right here
@cesargarduno79995 жыл бұрын
Get those leafs de arched there's places that will make them for you. Having your diff so far away from your centerline will eat that pinion bearing quick...and you carrier bearings too.
@fraudexposure63185 жыл бұрын
cesar garduno yep.
@MarcoTrillion2 жыл бұрын
Nice!
@scottyspliffen74213 жыл бұрын
I got a 93 Toyota pickup and a Nissan 350z ur boy axel got the same set up haha that’s tight af good video tel ur boy good shit on the Nissan and yota mix haha
@700lbs_ripped10 ай бұрын
What wheels are those g. Looks mint as
@TheSpirituallyRooted2 жыл бұрын
Nice. Where'd you get your sunroof done at?
@micmic94105 жыл бұрын
Man!!! Use at least a 4x4 block of wood. Never a 2x4. Very dangerous. Be Safe!
@chrissoltero96755 жыл бұрын
What are those wheel specs and spacer size ???
@dakotahall19915 жыл бұрын
Does no one care about how their trucks drive anymore instead of doing the cheapest job?
@ronslux96094 жыл бұрын
Where can you buy that simple! Sticker? Is there a link to it?
@can23rob6 жыл бұрын
Na man forget the haters! Like you said just improve from them but keep up the good vids!
@davidsferrazzo4 жыл бұрын
What air shocks did he use in the rear?
@armandogonzalez92423 жыл бұрын
Since he's lowered it so much how much has he shortened his drive line if any?
@whytelux14084 жыл бұрын
Does Air Shocks bring the car lower than normal shocks?
@donyohny94464 жыл бұрын
What size wheels, fitment looks sick
@josephltd86583 жыл бұрын
Great
@yungdro90644 жыл бұрын
And who did his sunroof? What part of cali you guys in???
@landonrobinson56504 жыл бұрын
What size tires and rims do you have on this
@gavenquichocho892711 ай бұрын
did he have any issue with the drive shaft shifting forward?
@johnvela81005 жыл бұрын
Love it bro keep doing what your good at im a do it your selfer and fabric tor do my own lifts and drop kits so thumbs up .
@mrblue93615 жыл бұрын
Cool trucks dude I got an s10 myself I got to lower
@high_im_prod19833 жыл бұрын
What wheels you got on the mini?
@lowboost85324 жыл бұрын
Info on the wheels, and info on who did the sunroof.
@alvaroeloredo3 жыл бұрын
No quema cuh!!!
@FabFiend5 жыл бұрын
cool video man. but mono leaf is sort of dangerous and also stacking blocks is a huge no no. they can actually flip over and shove the axle to one diretion and fuck the truck up. a pan hard bar can help this from happening tho. keep up the good videos man its always cool to watch people helping other car guys out
@lowboost85325 жыл бұрын
What's the info on the wheels? And the adapters?
@jasonrivera4209 Жыл бұрын
What kind of wheels are those?
@javiermenchaca9824 жыл бұрын
What tire and rim size your homie have on his Toyota
@omartorres27215 жыл бұрын
Do you have a link of those blocks and u bolts?
@TheBlueInvader5 жыл бұрын
I love the reggae music in the background. But how do you lower the front of the mini truck ???
@ADixOni4 жыл бұрын
you can either adjust the torsion bars, buy lowering spindles, or flip the ball joints. I would recommend doing torsion bars + any of the other two
@joshuagarcia84975 жыл бұрын
Dope pickup. What is the song please?
@martinbarbosa1163 Жыл бұрын
Hey what kind of rims are those and what size?
@wesjc52114 жыл бұрын
What size of wheels you got?
@jonathanguzman-baltazar10372 жыл бұрын
i got the same one just white lit one
@Funz_23_9 ай бұрын
What sun roof u have on the toyota
@nathanbennett90254 жыл бұрын
Damn that's a rigged up job right there f*** the lowering blocks
@k129h83 жыл бұрын
the jenga rear lowering block method
@armandogarcia97975 жыл бұрын
Buen trabajo carnal you guys did a great job, My question is donde puedo conseguir las little lights que van on the side of the fender? I have a Nissan 1997 like yours ! Hope u can answer my question
@xC-od8js2 жыл бұрын
3 years late but you can find them on eBay
@rafelitodjiadon280010 ай бұрын
Men I need you help
@chino63635 жыл бұрын
Hi. How do you do to low front of The toyota?
@datuce76344 жыл бұрын
Braddah check out Hawaii mini trucks the seen is big out there. Good job ain't no better than doing your own work
@solomatruck50255 жыл бұрын
what sizes are the wheels??
@ksboi294 жыл бұрын
What wheels are those?
@HONDAMeskin1234 жыл бұрын
How do these Toyota’s ride when you lower them? I had a Nissan 720 that rode really bad once I lowered I and I didn’t like it. I love the body style of these I wanna get one but not sure how they ride
@humbleniss90564 жыл бұрын
JMaganaProductions _ it’s supper stiff and bumpy
@primdex5 жыл бұрын
Did you guys take off the bump stops bc I did this to my s10 and It’s hitting my frame hella hard all the time
@humbleniss90565 жыл бұрын
primdex which bumps stops , the ones on the rear ? But we have a buddy who has a s10 as well who did blocks also and took the bump stops off and he hits too , for s10s I would suggest to get a knotch like the Toyota in this video
@faascencio6 жыл бұрын
You should of left the the 2 long ones......mono leaf drop.
@haroldmcshane22325 жыл бұрын
make a video of you doing the front too
@MrGrzmnky4 жыл бұрын
Do u know the wheel and tire size?
@thenon_kommunzchannel93533 жыл бұрын
I live in temecula. I may take you up on the help and ideas offer.
@brandong57885 жыл бұрын
Where you get longer u bolts
@watti94hb666 жыл бұрын
When i mono leafed my 22re, it was too soft and bouncy for me. Hows the ride with air shocks?
@humbleniss90566 жыл бұрын
Sean Watkins that’s weird because my friends truck was stiff
@watti94hb666 жыл бұрын
Humble Nissan stoked for you! They make dropleafs for the hardbody, do they make em for yota's aswell?
@humbleniss90566 жыл бұрын
Watti94HB yes I Believe, the bell tech drop springs
@watti94hb666 жыл бұрын
Humble Nissan kzbin.info/www/bejne/jaa7qmevba5nrKs This is where im at ritenow.
@jbuloke6 жыл бұрын
Why don't you just flip the leaf springs upside down? Me and my friends us to flip the leafs upside down on Suzuki Samurai drop or add drop blocks. That's going be a very hard stiff driving if he hits any pot holes or and minor dips on the road
@patrickfields33923 жыл бұрын
Is it possible to put the overload leaf on top to stiffen it up when running the mono leaf?
@patrickfields33923 жыл бұрын
Nvm I just saw the end and it looks like the overload sits about the same on the bottom how I thought it would sit on the top, touching on both sides at the ends of the leaf, any positive affect to running it on the top or too much of a headache for little effect?
@justinabiva99725 жыл бұрын
what wheels?
@king_haines66685 жыл бұрын
How you lower the front, sorry if I sound a little dumb but I'm new on all this!
@docsgaragewerks5 жыл бұрын
Ball joint flip is a easy process. Depending on year
@averagejoe2445 Жыл бұрын
What size wheels and tires
@mastereyrey65935 жыл бұрын
What camera you use or lens?!
@humbleniss90565 жыл бұрын
MasteReyrey! ! Its a G7X mark 2
@humbertoreyes32264 ай бұрын
He’s kinda shy lol
@nelsonmartinez62775 жыл бұрын
Is the sunroof on the Toyota aftermarket? Is so where did he get it from?
@humbleniss90565 жыл бұрын
Nelson Martinez the sun roofs on all of our truck are all after market , we have a guy who does it for us
@abelmartinez6025 жыл бұрын
Around how much does those dope sunroofs cost?
@finnhuntertaylor90722 жыл бұрын
Anyone know what wheels he’s running on the Toyota ??
@roldanrocket78715 жыл бұрын
si ases videos en español mucha rasa te seguiria
@TOWENCOUNTERS4 жыл бұрын
Hey bro FIRME truck I was wondering where did you got the sunroof cut off and how much
@humbleniss90564 жыл бұрын
STREETXWISE 714 club member and me did it and wired it
@TOWENCOUNTERS4 жыл бұрын
HumbleNiss are you local my boy?
@joelg.r6133 жыл бұрын
0.53 how low was there
@realj3rkii8654 жыл бұрын
Never do this plain and simple. NEVER stack blocks. Get a real lowering kit.
@81juannunez5 жыл бұрын
Hey bro nice work their.. I have a 1998 Toyota truck as well I'm trying to lower too. What are are in? Would like to link up you. Looks like you know wat u doing 👌
@humbleniss90565 жыл бұрын
J.Karlos Nunez where are you from
@81juannunez5 жыл бұрын
@@humbleniss9056 LA
@joelg.r6133 жыл бұрын
0:53 how lower was there
@bernardvargas38675 жыл бұрын
Good video bro, Let those pendejos talk shit, keep up the good work 👊👍
@derekdavis65084 жыл бұрын
I was looking at a mazda, s-10, Nissan or Toyota.
@jonathna116 жыл бұрын
Hey I got a 97 nissan hardbody and want to go lower how do I lower my front? I was thinking of doing the beltech lowering leaf springs and a 3 inch block. But have no clue how to do the front.
@can23rob6 жыл бұрын
jonathna11 first make sure you have tires that fit, my truck was 4 inches from the floor, I removed 1 leaf spring from the back and had it on 2 inch block and the front just lowered the torsion bars
@ed_savant5 жыл бұрын
but if you loosen the torsion bars, dont you get bad camber. and have to get it aligned ? (this is the only reason why i havent messed with my torsion bars yet.)
@can23rob5 жыл бұрын
Edgar Cervantes mine wasn’t that bad but if you worried about it you can buy the drop spindles
@ed_savant5 жыл бұрын
@@can23rob ok thanks bro
@hawaiiaction.19765 жыл бұрын
5 inch blocks.his rear end must touch the bed.didnt see the notch.
@crook_gang19843 жыл бұрын
Bruh in guam this truck i see them alot
@Kevin-qc3ro5 жыл бұрын
Y’all from Oceanside ?
@humbleniss90565 жыл бұрын
/ CLApZ \ yea
@Kevin-qc3ro5 жыл бұрын
That’s cool I seen that dude Axel around Center Street
@Mister0065 жыл бұрын
He's kinda shy... uh... no.
@bedfordfrst4 жыл бұрын
In the beginning speak up , it's hard to hear you
@mandolisan36755 жыл бұрын
Can you please reply to my comment if this is 100% safe and risk free? I’m planning on doing it to my mini but I have no blocks
@docsgaragewerks5 жыл бұрын
I just did one to my friends truck. It's good along as you dont overload the bed with weight. You get about 2 inch drop just doing this..
@Brooklyn_Powers4 жыл бұрын
PayPal WireIN It’s never good to remove leafs and a big mistake to stack blocks. Very unsafe and rides like crap.
@echeverria19044 жыл бұрын
I need help with my Toyota pickup. Hit me up 🙏
@punkgardener11 ай бұрын
so slow is hard to use its a goods vehicle right
@conboss19454 жыл бұрын
Hit me up broskie I own 93'Toyota hilux
@arrrsoul59995 жыл бұрын
whats the name of the first song 1:46
@humbleniss90565 жыл бұрын
Ricardo Huia one of my homies songs , realnovane u can find him on sound cloud
@toycelica1856 жыл бұрын
Hey nesecito alluda con mi D1 Fabian
@humbleniss90566 жыл бұрын
Toycelica1 Greed what do u need
@yungdro90644 жыл бұрын
Bro what rims is he running thos shits are sexy ass fuckkkkkkkkkk