Lowest CEN Racing F450 slammed with Superscale2020 module and Crawlersncustoms lowering kit

[@pippinjg]

Dude your insane with the skills i just got 2 CEN F450's both with crawler motors Hobbywing 2 in 1 1800kv and some other little stuff. Your mods are sick !!!!!

[@crawlersncustoms]

Thanks brother 🤛🏻. I’ll be posting an install video of the lowering kit and super scale in the next 10 days or so. And update often on my IG crawlersncustoms

[@carlosthercguy2058]

Hey Brother Where can I purchase a kit from you

[@crawlersncustoms]

@@carlosthercguy2058 hey man. Head to my IG crawlersncustoms and there’s a link in the bio. The kits aren’t listed yet, I’m waiting on an order of 16mm grub screws to arrive. I’ll put 3-5 up for sale soon. Thx 🤛🏻

[@vwagon5566]

@@crawlersncustoms James are you doing this kit for the F450 Ford? If so I'm in for one. I really appreciate the enganouity and designing it has taken to produce this "kit". Please let me know if this is a possibility. Thank you.

[@crawlersncustoms]

@@vwagon5566 yup! They sell as fast as I make them. Watch the other 3 videos in my playlist and keep an eye on the Etsy store. Link is in the bio on my ig account @crawlersncustoms

[@faithfamilyfriendsforever6777]

The bed looks great cut away just love it.id throw some cool LEDS to shine threw the open bed.

[@crawlersncustoms]

Thanks, that's been on the to do list for about a year, it gets close to the top and then pushed back down by other projects.

[@blackmamba1870]

can't wait for my lift kit to get here... this may be the next project

[@crawlersncustoms]

The lowering kit is a big job, definitely not for everyone. Make sure to watch the assembly vids before deciding to go for it 🤛🏼

[@jkflorida]

Such a cool build! Nice job!

[@NorthEastLowrider4lyfe]

Can you print some taller rear fenders,so we can lay harder in the rear?

[@crawlersncustoms]

Haven’t thought about that. I was leaning towards running the slightly smaller 53 COE wheel size and running a low profile tires on those. Combined they should be 10-15mm smaller in diameter. Also we did make low profile tires for this lowering kit and made a version two which drops the front bumper to the ground.

[@NorthEastLowrider4lyfe]

​​@@crawlersncustomsYup! That's what they do on 1:1 duallys , something similar. Section the fenders and then basically bring the top of the fender to the top of the bed line, so you have the maximum tuck ,while keeping the body lines. I just purchased the f450 yesterday,but already planning on body dropping it 😂 Keep up the great work man!!

[@LuC-HFS]

Great video, where did you get those wheels? Could you share the link to the used parts?

[@crawlersncustoms]

Thx. Most info can be found on our other videos on this truck and website crawlersncustoms.com/ thx

[@scottdaubenspeck2291]

IM so far behind. Awesome kit man this is impressive. May have to pick 1 up for a tow rig

[@EstablishedLowriders]

So glad I got my notification, I ordered my kit today! Can’t wait to build my Cen 450 slammed🦾 I need a 5th wheel to pull my trail any help greatly appreciated🙏

[@crawlersncustoms]

Awesome! Have fun with the build. Easy to knock it out over a few evenings of work.

[@bradzurba1843]

Not a huge Ford fan, but this build is incredible.

[@tylerneff]

Hey so I’m having trouble finding the kit I’ve looked on the website that you have in the description and I can’t see the lowering kit

[@crawlersncustoms]

Check our main site crawlersncustoms.com/ it’s current sold out but I make them about every week. Click the notification button for stock updates. Thx 🤛🏼

[@tylerneff]

@@crawlersncustoms I sure will thanks I really like this lower idea with the sky level I like that a lot

[@dewaynebrown5983]

Good job, it looks really cool 😎 👍🏾

[@derike46]

I am interested in the kit but didn’t see the complete kit in the link. Could you send me an updated link?

[@crawlersncustoms]

Check our main site: crawlersncustoms.com/

[@crawlersncustoms]

They sell faster than we make them. Use the notifications button to catch the restocks. Thanks.

[@skeetermcswagger0U812]

With all The Mods and no body it looks like the Batman Tumbler b4 the 2 wheeled version comes out.

[@frankcastejon5156]

very sharp. how do I order your kit

[@crawlersncustoms]

Frank, best way to catch the drops is to hit the notification button on that product page. Thanks! www.crawlersncustoms.com

[@keithjones2963]

How you set the wheels under the frame ?😎

[@crawlersncustoms]

That’s what my lowering kit is for 🤛🏼

[@philipabala8385]

Will it be compatible with the "Do Work Bed" back bed?

[@crawlersncustoms]

Not easily and I wouldn’t recommend it. That being said I have seen it done.

[@Twizztify]

Nice! I really only want the 4 link parts because I want to do the opposite and lift mine. Do you know if I can get just the 4 link parts?

[@31turk]

What about rear housing, is a custom width,does that come in the lowering kit ?

[@crawlersncustoms]

Hey man. Is parts of the original axle with new bearing retainers, axle plates and truss. If you go onto the 2nd video (the sub components assembly) you’ll see all the details for the mods to the rear axle.

[@robertsantiago6386]

Purchased your kit and super scale. Was needing help with setting up my radio. Dx4c. Any guidance will help. Thanks

[@crawlersncustoms]

Awesome. So you need to set up an aux channel. Best to watch spektrum videos on your specific radio. But basically the superscale reads the aux channel. -100 or +100 will be full up or full drop. 0 or neutral will be a middle height setting. Similar to programming a winch as well so videos for that using a winch on your radio would be good to review 🤛🏼

[@pingadulce4201]

Where can I buy the kit ?

[@crawlersncustoms]

crawlersncustoms.com/products/f450-lowering-kit

[@MaliceMuzik805]

Are we Able to still add fifth wheel ? Or recommend regular tow hitch after lowering it with the kit?

[@crawlersncustoms]

Yes, each kit comes with an additional 4 link truss for the rear axle that lets you mount an m4/5 to then attach a 5th wheel.

[@joshuagonzales11]

How did you Nuro the rear end

[@calebcassidy6998]

How do I contact you ? I would like to purchase this

[@crawlersncustoms]

Good morning. Use the “email notification” button on our product page to see restocks. These sell faster than we make them. Www.crawlersncustoms.com

[@dannyrodriguez645]

We can I buy the kit

[@crawlersncustoms]

It’s sold out at the moment but I’m making more and should have some restocked by Sunday night. etsy.me/2P2oMmM

[@OnTheBottle]

I'm trying to find a kit to lower a full size 2021 F450, and I keep getting results for you guys.... What a tease LMAO🤣

[@crawlersncustoms]

Lol. Good luck! The tiny trucks are easier 🤛🏼🤘🏼

[@kevinpallen4246]

How much is this kit?

[@crawlersncustoms]

Https://crawlersncustoms.com/

[@AndresMartinez-if8uf]

I want to buy this kit. When will they be back in stock?

[@crawlersncustoms]

These hit the website a few at a time every other week or so.

[@AndresMartinez-if8uf]

@@crawlersncustoms ok thank you. I hope to get one soon

[@AndresMartinez-if8uf]

@@crawlersncustoms can you still add a ball to pull goosenecks?

[@crawlersncustoms]

@@AndresMartinez-if8uf yup. Comes with an axle truss that takes the ball hitch. Check the photos on our Instagram

[@AndresMartinez-if8uf]

@@crawlersncustoms there is a guy on fB selling a truck with your kit. It looks awesome. He’s asking $1,750 tho. Seems pricy but after adding stuff up seems like parts get expensive.

[@carlosthercguy2058]

👍 nise bro

[@azliwuq2974]

how much the lowering kit cost?

[@greentractorr]

I don’t think it’s a kit but not sure. I think he 3D printed the parts?

[@Twizztify]

How much would you charge for just the 4-link axle trusses? Thanks!

[@crawlersncustoms]

Just saw your request. Sorry for the delay. I’ve had a few people ask for the trusses and axle plates. I think I’ll offer that as a separate kit coming up soon. Need to catch up on the lowering kit orders.

[@Twizztify]

@@crawlersncustoms cool, so just keep checking on the Etsy store? Thanks!

[@crawlersncustoms]

@@Twizztify or follow on ig for more frequent updates. @crawlersncustoms

[@keithjones2963]

Can you bagg my Rc f450 dually CALL THE SUN SET 😎👍 I have videos LoL man spikes on that baby would be DOPE 👍💯 I love it !