Lowrance custom mount very cheap

Dual lowrance mount for very cheap

[@MrBdogg317]

I just brought a 03’ skeeter zx225 and have that same setup on the console. I couldn’t figure out how to mount my graphs but now I can. Thank you for this video

[@jasont7887]

Music city bass Where I cut the 45 degree angles in the bracket right above both of my gauges I just drilled a hole in the bracket first then set it on the gauges so I knew it was level( those gauges set out a little so it’s like a little shelf on top of them) then I marked the console so I could drill through it. I took the bezel loose first before I drilled it just to make sure their was no wires behind it. Then I drilled through it and put a nut and bolt to hold the bracket on and reinstalled the dash bezel. It’s very solid. They don’t shake even in the roughest ride. Make sure to leave a space between your units like I did otherwise you won’t be able to see when your sitting down. Also I do a lot of catfishing at night and the units will blind you. I have a night mode on mine and it’s super cool. It will dim them down with different colors so you can cruise full speed at night while watching your maps and spotting your fish at the same time. Hope this helps? Good luck

[@dn142s]

Nothings wrong with that, some has to lookout for the everyday working man weekend angler little guy like me. I appreciate guys like you. Thank you

[@jasont7887]

I appreciate the kind words. I’m glad it helps people to save some money and gives them some extra ideas on what can be done

[@MH-ls1xi]

You sir are a champion ive been struggling with mounting 2 12in units on a small dash and this video has really helped me out and saved me big bucks i just wanted to say thankyou

[@eric.sparks]

M H did you build this? I’m doing one now for 2 helix 10’s wondering how it’s holding up.

[@jasont7887]

Mh Sorry I missed your post. Thanks for the positive feedback. Greatly appreciated. Hope it’s working good for you?

[@danielkrakos6217]

Just the video I was looking for! Great Video

[@jasont7887]

Lray 4x4 I run one transducer. It’s a lowrance total skimmer 455/800 it has side scan down scan structure scan and too many other things to list. It runs my right lc9 for my graphs and my left screen for my mapping all at the same time. Or whatever I set up at the time. It was $300 bucks when I bought it, but it’s worth every penny. The definition is amazing. I can see a tree 90 feet down and literally see every branch crystal clear. I’ve used it as far as 530 feet with no issues.

[@jasont7887]

Mh Thanks for the comment, I’m glad it helped.

[@dooman42]

Great job thanks for sharing

[@eric.sparks]

This is exactly what I’m looking for for my 195. Do you have any more of these now??

[@musiccitybass3222]

Hey Jason. I have a 195TXW and I was wondering how you bolted the angle to the console ?

[@Lray4x4]

Do you have 2 transducers in the rear?

[@eddiebrownfishing4077]

I was wondering if you had any pics of how you bolted it to the console?

[@forgivenoutdoorsman4032]

Me too

[@hashiramasenju4846]

ME THREE!!!

[@jasont7887]

Eddie brown fishing Somehow I missed your comment. This may be too late but check the comment I left for music city bass a few minutes ago. I’ve been pounding waves with this setup for awhile now and their solid as can be . They don’t shake at all

[@peggysmith5853]

I'm wondering the something. My Triton has a flimsy panel and had an in dash finder. I am also interested in the install to the dash. bolts ,brackets supports. thanks and that is a great looking mount

[@michaelj8067]

Jason, I've got a 2019 175 PT, what would be the cost with shipping?

[@ryankimball6030]

I know this is old but did you add anything behind the console to beef it up or just used the strength of the plastic to hold all that up there?

[@ryankimball6030]

Found the answer. Thanks man.

[@jasont7887]

Ryan kimball I just used a nut with an oval type washer with a lock washer because the plastic console piece is somewhat rounded, but nothing special. That plastic is fairly thick and not cheap and flimsy. I’ve been ripping down the rivers and lakes and Even pull towables with that boat while jumping wakes. I’ve literally hit wakes so big that the boat comes completely out of the water and it’s never come loose. It’s as solid as the day I installed it

[@jimmyeriksson8715]

Hi Jason. How do i contact you? I have a few questions about this. / Jimmy

[@HookemLifer]

What year is your boat? I have a 2020 tracker pro team 190 tx that I'd love a single mount for!

[@jasont7887]

That’s a 2016 tracker pro team 190tx

[@Mark-dj5qf]

How did you bolt it to the dash?

[@jasont7887]

All I did was unscrew the console cover and pull it back enough so I could get my hand behind it and then drill your hole, then just put a washer and nut behind it and tighten it down, then screw your console cover back on. Easy peezy