Lowrance Elite FS Settings for ICE FISHING - Fish Finder Setup & Programming Tutorial, Step by Step

Today were going over Setting up your Lowrance Elite FS Fish Finder for Ice Fishing. This instructional video will show you how to make your summer boat unit better than any flasher on the Market. From start to finish. Joclyn also mentions some great tips during the video for target definition, setting the sensitivity, using your zoom levels and backtrack features properly.
Going through the settings step by step by yourself is great for helping to learn your fish finder unit top to bottom and for a better experience on the water. This helps to increase your odds of finding fish. If at any point you ever need to re-program your unit you can refer back to this video.
This seminar is by Prostaff and Electronics Expert Joclyn Leung of Angling Outfitters in Woodstock, Ontario. He has over 30 years experience in Electronics and owns one of the biggest stores in Canada. Joclyn is considered one of the most knowledgable experts in Canada for electronics and has been published in outdoor magazines. People travel from hours away to shop, buy from his store and seek out his expertise.
#lowrance​ #elitefs #elite #lowrancefishing #lowrance #fishfinder #Electronics #setup ​ #icefishing #HDS
www.ampmguideservice.com
/ anglingoutfitters
Socials:
/ hookedntravel
/ ampmguideservice
www.ampmguideservice.com
/ anglingoutfitters 519-539-5494
KZbin Intro Created by Kaitlyn Farley:
@_kaitlynfarley
Fight The Good Fight Productions @ftgfproductions

[@harrysmith6638]

With electronics pushing the ability to be more productive on the hard water it's greatly appreciated that these guys give us the tools to get the most out of these fishing systems . Thanks again and keep the videos coming

[@hookedntravel]

Glad your enjoying these videos! That’s why we do this! We’ve got a lot more idea’s coming down the pipe

[@guidelife5961]

Just grabbed my elitefs today from Jos. Loved how he showed me everything in store and then i can follow along at home. Thanks for these great videos guys

[@hookedntravel]

great to hear you got this all setup for the ice! Thanks for the kind words

[@johntyler4570]

Gonna get my ice fishing up done after watching this video! thank you!

[@hookedntravel]

Thank you for the watch! nightlines

[@outdoorsnwild8344]

I love these tutorials. Super informative!

[@hookedntravel]

Thank you for the kind words!

[@alexkyle9900]

These videos are amazing. I am learning so much with everysingle one. It may not be the unit i have but the detail and the tidbits that are added, are just great. Thank you.

[@chadjansen9097]

Thank you

[@hookedntravel]

Glad you enjoyed it!

[@Tritie]

these videos really helps me configure my unit, damn I was so limited before! You explain everything really good! Great video, once again! Do you recommend any ice sonar in particular to my FS Elite 9? Happpy new Year!

[@hookedntravel]

thank you for the kind words, glad it helped you. Would be the one Joclyn has in the video. The 9 pin ice transducer (PTI-WBL). I think Lowrance calls it the Ice Transducer with 9 Pin Connector on their site.

[@fishonthebrain]

Thank you for the setup vids!! I have the elite Fs and a hook 4. Do you have recommendations when using them near each other. I get bad interference when they are both running. Thanks again!!

[@hookedntravel]

yes we do. So the elite FS is going to be the better unit obviously. It's going to have more in the computer to reduce interference. The eliteFS is going to have more options on cone angles, dual cones and frequencies. Try only running one cone, Try high chirp or 200khz. You may have to only be Able to run one frequencies on one unit, then another freq. on the other. I would play around with Ping speed, frequencies, and maybe using them further apart. Also sensitivity is going to out put more power as well which may increase read interference.

[@osilekpl79]

Why not use high chirp instead of 200Mhz on one of the splits? Thought I heard you guys mention that on older units. Thanks for teaching us, I didnt even know what I had, cant wait to start using my unit.

[@hookedntravel]

you can do that as well! the 200 and 83 kHz are mainly for the video. There shouldn't be interference but if you see any or other sonar/flashers nearby, can switch to clean up your image. The dual cone, is unreal! Cheers

[@kristiansstekelis4798]

Good afternoon. Which sonar is for lowrance fs models for winter fishing

[@glenndaugherity6187]

Just started running the Lowrance Ice Bundle with Active Target using my Live 9 from my boat. Is there a sensitivity setting on the Active Target ? Or will the sensitivity that I normally use on my Live 9 adjust the sensitivity on the Active Target ? Thanks

[@hookedntravel]

If you're on the sonar screen, that sensitivity level is just for the sonar. The active target contrast is your sensitivity. They've combined the settings for user friendliness and it adjust them together for the best readout. We have an active target setup video on our page that goes over it, we also have an Active Target Setup for ice fishing video come out soon too. Stay tuned for that

[@bauml1619]

Is 22 degrees the tightest cone angle this unit can do???

[@hookedntravel]

For the ice transducers yes it is.

[@bauml1619]

So the high chirp setting does not tighten the cone?

[@bauml1619]

Or is there anyway I can get a tighter cone?

[@hookedntravel]

@@bauml1619 chirp will actually tighten it a little bit. It's based on a set of frequency ranges on the higher end, for better target definition and sweeps through a range of frequencies and cone angles. For this 9-pin transducer, we confirmed with the lowrance tech that what we state in the video is the correct angle. Manufacturers can change cone angles for frequencies on transducers depending on the updates and how the operating system is set.

[@toddgratton6406]

Am I able to do this on my elite fs 7?

[@hookedntravel]

Yes you will be able to. The 9 and 7 inch are the exact same unit. Cheers