LOWRANCE: HDS 9 LIVE SETTINGS EXPLAINED

[@idaniamairena4191]

In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens kzbin.infoUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.

[@robertlink8221]

Thanks for the video. I’m a first time owner of an HDS 9 Live. Didn’t know anything about until I watched.

[@aaronkeiser6349]

I feel like the software engineer who made these wanted to make us all feel like chimps interacting with alien intelligence

[@DanaCrosby]

Can I install install aa Gen. One with a with a 3 and 1 transducer through the Structure scan module

[@balikkampi]

Which mirror should we buy for pro agler 12?

[@FrankLopez-m4q]

I'm not a techie and need to keep things simple. I'm upgrading to HDS9s on bow and console. I've been an avid bass for forty years + -- but don't fish tournaments and just enjoy fishing. While I will probably have a 3-1 transducer on the trolling motor and transom (because they came with my purchase) I still want to keep it simple. At some point I hope to get comfortable with side scan, but it's not a big deal for now. Can I just keep both units separate and occasionally use the ethernet connection when needed? And what is the main benefit of the networking if a guy just wants to look for fish and structure. Baby steps.....Thanks, and thanks for the excellent video.....Frank

[@johngenoni1927]

Great video what does heading extension do

[@Gumby1978]

I just got a 12” HDS Live, 9 “ ELITE FD and ACTIVE TARGET What is the best video that you recommend? New to the tech fishing.

[@markoland5168]

Great channel, great info, and great products. Enjoy all your videos

[@api9714]

I have the Lowrance Live 7"--Can I upload waypoints via wi-fi or only via a chip? Also, I have the LSS-2 SS HD Skimmer 'Ducer, which 'ducer do I choose for it under the setup? thx

[@stuartspinks3642]

Hi guys, really enjoying your videos, I have just recently had a HDS 12 installed and took it for a test run but not getting a picture at speed, are you able to give me any advice please. Regards Stuart

[@RussellMarineProductsLLC]

you will want to add a shoot thru the hull 2d transducer (fiberglass boats) or a 2d skimmer for aluminum.

[@nicksandrof9345]

So I’m new to Lowrance.. I have Garmin units on my Jonboat but just bought a Triton with dual HDS screens. On my Garmins it’s important to not have networked screens running on the same frequency. Is this an issue with Lowrance? Thanks for you help in advance! Appreciate your vids, I’ve been lurking for some time now 😜

[@Steve-sv3ln]

Great review! Ty! I'm a bit confused though. On Lowrance's website...it seems like they're advertising these units as not needing a transducer?? I was like WHAAAAATTTTT...OH YEAH BABY!!!!! But, then I see you guys pulling out that huge transducer...buzz kill! lol. How could I use thus unit for ice fishing?

[@jizzojb1]

Anyone know of any outfit that might have decent price on the HDS 9?

[@djandreysoul]

Thanks for the video! I just bought the Lowrance HDS Live unit with the 3-in-1 transducer, I also got the Minn Kota Ulterra US2. which transducer would you recommend to use? can both be connected the same time? any advantage of the US2 vs the Lowrance one?

[@RussellMarineProductsLLC]

you can use both, but the Lowrance 3n1 is going to give you a much better picture than the us2.

[@nevsterk2463]

What do you need to buy to get the radar on your unit

[@jalalelamin5346]

Can i use the tablet as an extra monitor when it connected wirelessly?

[@grider46]

How can I calibrate the touch screen,I have problems with a new hds16 unit

[@timbobic6715]

Hi I recently purchased the ghost trolling motor with the standard 2 in 1 and a 12" live with the 3 in 1. I can select my either my trolling motor or 3 in 1 as a source for my sonar but can't seem to select my trolling motor down scan. I don't have a nema system but have my trolling motor plugged into the ch 1 port. What am I doing wrong? I love all of your videos. You are a great speaker and teacher. THANKS!

[@TheLaughingBuddhaAdventures]

I turned off CH1 and turned CH2 on for my 3-1 and it said I had no source. I plugged it in the black port . I am not getting a sonar or depth reading. What's my next step? HDS 9 Live I bought a month ago and installed this past week.

[@deweysturgill6220]

What's up that a three in one transducer dosent show up on the selections list? It's pinging, and is working but I've got it set on reg ssd becuase there was not a 3 in 1 "to choose from. I did the #20 update but didn't change anything.

[@troygoesfishing412]

Hi thanks for the information very good stuff. I’m having an issue with my depth overlay. I’m not getting a depth reading when my boat is on plane. It comes back when I’m at idle. Please let me know what you think? Thanks

[@RussellMarineProductsLLC]

Troy, we recommend a thru-hull transducer to solve that problem. Thanks for watching

[@troygoesfishing412]

Thanks l new it would be something like that.🤙

[@danielbates7615]

@@troygoesfishing412 I had the same issue on this unit and it was a couple of things. The bracket that holds the transducer was installed incorrectly and the the transducer also needs to be just slightly below the bottom of the boat, like a quarter of an inch, and that fixed it. Works perfectly now.

[@petertiano2845]

I am having an issue with my depth as well. My unit and transducer worked great for about a year and one day the depth just stopped working. Depth come and goes and I’m not sure why. I’ve called support and gone through the hard reset process and still having the issue. Anyone experiencing the same issue.

[@hanshutasoit903]

How can I purchase for SONAR DEPTH DETECTOR Type HDS-9

[@tonyholzer5162]

How do you make the numbers bigger on your screen,like water temp and time.

[@RussellMarineProductsLLC]

Check out our edit overlay video. Instead of adding an overlay you will select "configure" and can change the size of the font.

[@charlesstrange7316]

how do you put unit on standby

[@babahassen1234]

Hello I can not find the frequency of the Tm 260 airmar I have found all -airmar -but this one is missing How do I do it

[@blandry021]

Great video, basic but I learned a lot, I was looking for engine interface, I have the NMEA 2000 already setup and can see my Evinrude, but can only see 4 gauges, no trim, and no gas, I would like to monitor how much gas I'm burning. Do you have any videos on that subject? Thanks

[@RussellMarineProductsLLC]

We currently do not, but you can call us at 316-313-4113 and we can discuss what you need to accomplish that.

[@jeffdavis684]

Great job now I under stand the 3&1 set up. THANKS

[@michaelferguson167]

The problem I have with Lowrance is many of the basic features are near impossible to find. A friends default settings on his unit (right out of the box) don't even look like my default settings and we have the exact same unit. I can't even find where the frequency setting even is on his unit and I've looked basically everywhere for it. I kayak fish and the most important things I want in my unit are these: 1. I hate the way the basic sonar screen looks. The depth numbers are way too small and the color is way too dark. 2. Same goes for the temperature setting. 3. I still can't find where the speed icon is or how to place that on the sonar screen. 4. I would want to configure down, side scan etc all the same 5. I still can't find the color palette tabs either These are all very basic things that should precede everything you discussed. I've never had ANY of these issues with a Hummingbird and only bought a Lowrance unit because they fit in my Hobie kayak. I love my Hobie's but their arrangement with Lowrance was a huge mistake in my mind. I've had nothing but problems with both of the units I've purchased from them. The technology may be great but they are absolutely clueless as to how to simplify many (not all) of the basic operations of the unit. I feel like they're speaking Chinese to me when I'm speaking English. I'm not knocking your video- it is helpful. I'm knocking Lowrance because unit after unit, year after year they still can't simplify their units basic operations despite their claims.

[@vw254]

Hi. I want to make an inquiry. I have a Lowrance HDS 9 Carbon and the screen gets very hot, even the touch screen sometimes stops working at times ... is it normal?

[@patrickomeara7278]

Do you guys have any solutions if a 3 in 1 transducer will not auto recognise? I have a HDS7 live and a 3 in 1 transducer and it recognises the transducer less than half of the time. What transducer should I select when it’s not recognised because AI 3 in 1 is not an option to select. Thanks, your videos have been extremely helpful 👍

[@lubosgalo4140]

I bought Lowrance HDS 9 Live, i have transducer all 3 in 1 and also 3d transducer. What are the settings preset in Lowrance HDS 9 when both of them are functioning? How do i know that 3D transducer is working correctly? I dont know where the problem is, but i cant connect to wifi and GPS. Can someone help me with this?

[@ollejarleborg1207]

Thank´s for a great video ! I intend to purchase a HDS Live 9 and connect to my Ti2 . I have got replies that this is not possible but would it be possible to use the app "Link" to mirror my screen to Ti2 with BT ?

[@TGossOutdoors]

THANK YOU!

[@No_mans_flies]

Another great video, have you guys heard of any new transducers or upgrades for livesight?

[@danielbates7615]

I just bought the livesight transducer b/c they have a $300 rebate, but I worry they're going to put out something new that's on par with Livescope and that's what's driving the rebate. I called Lowrance customer service and asked and they said they weren't aware of anything...

[@No_mans_flies]

Daniel Bates I say they couldn’t tell you if they did know about something, lowrance would have a release date for information. How do like the livesight so far?

[@filipcarlsson1]

That is not the original bracket for the HDS 9 live right? The standard is more chunky and I’m not an fan.... were can I buy the one in the video?

[@mobasser]

I’d second that, never could figure out why they put that plastic bracket on this unit, although it is probably stronger than the metal one, but make the unit look cheep IMHO

[@josephcrotty1520]

@@mobasser I don't like the bracket either, my bracket rattles/chatters and its not loose.

[@josephcrotty1520]

I cannot seem to get very good sideview imaging, it always looks like it's rolling sand below with nothing else. Occasionally I'll see what looks like shadows from standing piling's.

[@r.bouth.6457]

You american are crazy or those fishfinder are not.able to use them on 800 feet deep water for fishing. Why ? Why do you use such a complex sofesticat unit that cost above 1500 dolar on cayac on shallow water ? I need a fishfinder to fish 400 up to 900 feet deep water.. Thas that Fishf.. fullfil my needs ? Would you recommend me that brand and model or which would you recommend me ?

[@CarpenterAntonia-l9n]

Rickey Lodge

[@ElizabethMiller-x7k]

981 Rath Ranch

[@MillMaurice-j9y]

Tillman Manors

[@CelestaStreczywilk-f3d]

Benny Gateway

[@ChristinaBalkcom-b2q]

Tessie Ports

[@proforexnewsscalper2879]

lowrance should have.a lock screen password incase if stolen..

[@timcarter9146]

You smacking the damn gum is frustrating

[@PansyHarvey-z8y]

2861 Wendy Mount

[@olgasoldebrn3962]

In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens kzbin.infoUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.

[@mhk1582]

Hello I can not find the frequency of the Tm 260 airmar I have found all -airmar -but this one is missing How do I do it