LPVO/MRDS Mount Considerations

Some considerations for mounting an LPVO and MRDS and what I personally choose to use and why.
Train with us - Kinetic-consult...
Training Schedule - www.kinetic-co...
Kinetic Products - www.kinetic-co...
Kinetic Patreon - / kcllc
Kinetic Consulting T-Shirts - teespring.com/...
Discount Codes:
Agency Arms - MOCHABEAR10
Armordillo Concealment - MOCHABEAR
Bigtex Outdoors - MOCHABEAR
Cobalt Kinetic - MOCHABEAR10
Defense Mechanisms - KINETIC
Modern Outdoor Adventures - MOCHABEAR
Noisefighters - MOCHABEAR10
Noisefighters NVG Products - MOCHABEAR5
Rosco Manufacturing - MOCHABEAR10
Shooting Surplus - MOCHABEAR
Steel City Ammo - MOCHABEAR
Thyrm - MOCHABEAR15
US Elite Gear - MOCHABEARACTUAL
Support us by shopping at:
Amazon - www.amazon.com...
Blue Alpha Belts - www.bluealphab...
Brownells - bit.ly/2EaZrkp
Dark Angel Medical -
Defense Mechanisms - defensemechani...?aff=5
Firearms Depot - firearmsdepot....
Gun Mag Warehouse - bit.ly/2REkP3V
Magpul - bit.ly/3lHKsV0
Pelican - bit.ly/3Ckm5AJ
RE Factor - bit.ly/2yBJOw6
Tactical Distributors - bit.ly/2ydusOr
US Elite Gear - bit.ly/2yucxDa
My BLOG post - www.kinetic-co...
Spotify Playlist - open.spotify.c...
Follow on:
/ kineticconsul
/ kineticconsulting
/ kineticconsultingllc
www.linkedin.com/in/KineticConsulting

[@johnathan485]

I don't understand why you only have 36k subs.. Your videos are so much better than these guys with millions of subs.. DON'T CHANGE!

[@KineticConsulting]

Probably due to not shilling out or pay marketing companies. Also, I try to educate not entertain. I suspect that the majority of people want to be entertained not hard truths

[@ericquintana1900]

Just the video I’ve been looking for! Thank you!!

[@FirePrank6]

The two things holding me back from low mounts (

[@JW11595E]

1.42 is absolute height, 1.54 is the Socom spec for forward mounted clip on night vision devices, just a PSA for the uninitiated.

[@kalanipitmon7817]

Who tf is runnin nvg and only using a 1.54? Theres specific mounts for that

[@miguelangelrodriguez9293]

Clip on night vision devices such as pvs27 that go after your optics in tandem, not passive shooting with nvgs.

[@kenstirling5348]

I’m unitiated AF so thanks for the info

[@glycerin256]

Great video with Kitsiderations I hadn't thought of before. Thanks.

[@joquin4618]

So many good options… best to train with and for the application at stake that suits you best… 👍

[@xDeVeYx]

I have been looking for these lower mounts for a long time and just now finding them

[@cxsey8587]

Exactly the video I have been looking for!

[@Masta_E]

Great video! Love the thought behind using the lpvo for white light and red dot for nvg. I also like the dot up top, and as for mounts I went with the Larue for my razor gen 2 because it is proven, qd, and more light weight then most the more modern options. Thanks for the quality content sir.

[@no1maximus]

Spuhr has a slimmer cantilever mount with spuhr interface that weighs 100g less. It´s called "Hunting Series".

[@Fister_of_Muppets]

I've been stuck on what I already have, which is an ADM Recon mount. I like the idea of the Swampfox HE mounts and/or rings with the integrated 45-degree RMR machining on the scope caps themselves, but I've seen mixed reviews. It's a jungle out there.

[@shannon6243]

Thanks Jon for another awesome video. Do you use your top-mounted red dot as your primary 1x during daytime? What magnification will you typically leave your LPVO's at?

[@KineticConsulting]

Usually I do. Depends but I'll at least have it at 3x

[@kalanipitmon7817]

Usually, guys leave their lpvo on max magnification when using a piggyback rds

[@jeremiahburton901]

Personally I've found I like 45° off of the optic body. It allows me to have a ~2.2" height red dot with any scope mount height I choose. When rolling the gun slightly to use the dot your cheek is bumped up if using a large cheek weld stock like a sopmod or magpul sls.

[@nurse-dude]

I really wish Spuhr would make a 1.7" in there hunting line, I think it would make a killer setup

[@MilspecPanda]

Try a zero gravity LLC summit 1.7 mount. I have one, they’re nice

[@nurse-dude]

@@MilspecPanda dang they look nice but no 12 o'clock RDS mounts 😢

[@MilspecPanda]

@@nurse-dude true

[@BikesandBlickeys]

I think I have low ears or something lmao cuz with over the ear ear pro I cannot get behind the optic while standing with anything less than a 1.93. The ear pro gets in the way. Looking to buy my first LPVO and mount now and I feel locked into a 1.93 for that reason. I have a 1.93 dot on one rifle and a 2.26 on another and the 1.93 still feels fantastic while prone thankfully.

[@wc4201]

+1 for Spuhr. They are heavier but your optic will not move. I run a T1 on top of my razor in my Spuhr. Good setup but not cheap.

[@ArimaKihe1]

Greta review! Question - what is the advantage of a pistol red dot (Acro P2 etc) over an Aimpoint T2/Trijicon RMR when mounted on a LPVO mount? Cheers

[@KineticConsulting]

Slightly lighter in weight.

[@charlesl5226]

What lpvo/ red dot combo would you recommend for both ease of use with nv, but also one that won’t be useless if the battery is dead or fried in it. I was looking at a accupoint and respective RMR due to the lack of battery power, but not being able to dim the dot for fine tuning a zero and not being able to shoot under nods has me second guessing.

[@KineticConsulting]

So either of the setups I have work with ot without illumination on the LPVOs. I prefer closed emitter on top like I mentioned on the video and why.

[@emtothedee]

The question people always ask is, if you’re using the top dot as the primary, why hinder yourself with an lpvo and not just use a 2-10 of some sort?

[@KineticConsulting]

Definitely can. Been waiting for the leupold 2-10 reticles to get something I like

[@jackpinesavagemn]

With the Spuhr mount, can you run a DBAL A3 at 12 o'clock? Or would it affect the scope view.

[@boygonewhoopdataZZ]

It'll be visible unless you have a handguard less than 9" or a taller mount

[@KineticConsulting]

After 1.5x it is out of the fov

[@haidarrossam2282]

How high is the red dot from the top of the rifle or from the center of the LPVO ? I need that answer plz !!

[@emtothedee]

Seems like you could just run a .25” cheek riser with a 1.54 mount and effectively create the same optic heights ya? Just different HOB

[@peterkim2481]

For an LPVO and a piggyback red dot, do you have a preferred AR15 buttstock? Deciding between the b5 sopmod and the magpul CTR

[@KineticConsulting]

@@peterkim2481 doesn't matter. Both are the same height. The slopes in the sopmod may help or hinder you depending on your preferences/anatomy.

[@5jjt]

I'm new here and have a question. Why not use two separate mounts for the same scope/lpvo? They're cheaper, weigh less, and allow more options as to where they can be mounted. So, I'm asking why a unilever instead of two separate ring mounts.

[@KineticConsulting]

On an AR you don't want separate rings due to placement unless you have a monolithic upper. Placing a ring on the upper and on the rail can cause issues like binding to the scope making it inoperable. That's why you use both a single mount and a cantilever mount (the one that hangs forward slightly)

[@narutobroken]

What is that lever on the Vortex 1-10?

[@robertgatewood514]

Wait a minute, you're telling me I should define what I want the rifle to be able to do and then set the rifle up to accomplish that task? I've been doing this all wrong...

[@ThePatriotParadox]

Isn't the 509T's and other/all Holosun optics supposed to have 1/2 MOA per click adjustments at 100yrds??? Isn't that the same adjustments as the ACRO P2 & the Steiner ETC supposed to have????

[@KineticConsulting]

Supposed to, it's not always the case

[@Robert-cd5zr]

So 1.54 thermal does still work acceptably with the low 1.26? Like barely or comfortably?

[@KineticConsulting]

Works fine. Same with CNVDs

[@Robert-cd5zr]

@@KineticConsulting Awesome, I've always liked the 12 oclock red dot but disliked the HOB effect on cheek wield, so I'd like to go as low as possible with the main mount and retain thermal clipon functionality, 1.26 sounds perfect as I won't be running a laser or anything. Probably unlikely but think a super slim 45 offset BUIS might squeeze under still?

[@KineticConsulting]

honestly I wouldn't waste the space, money or weight on buis. You'll have 2 optics on your rifle anyways. ​@@Robert-cd5zr

[@todddunn584]

What thermal clip on are you using? What magnification on the day optic works well with it?

[@sneakydingo3079]

Looks like an RH25, from iray, best to use 1-3x magnification

[@xDeVeYx]

how high do the red dots end up being above the rail on these mounts?

[@KineticConsulting]

Sp 4026 = 3.99 Spuhr/Geissele Rep mount = 4.25

[@TheOVprodigy]

Thinking about going from a red dot/magnifer to a lpvo with a 12 mount. With the 1.54 height will I run into issues with my scope being blocked by my LAM? It’s a Steiner i2 which is somewhat tall

[@KineticConsulting]

Yes, on 1x but after that you should be fine when you magnify to 2x or more

[@TheOVprodigy]

@@KineticConsulting thank you sir I appreciate it

[@rileyoneil2978]

how do you mount your red dot to the spuhr?

[@KineticConsulting]

Spuhr has rds mounts that attach to them

[@lutheranpepsican]

why are these so expensive?

[@slappomatthew]

we are built different. that ultra low mount wouldnt be useable for me. I dont even like absolute mounts anymore. feel like I have a eyeball weld instead of a cheekweld. 1.93+ all the things.

[@5five6x45]

push LPVO !

[@kalanipitmon7817]

Adm delta 1.93 🎉

[@HotelBravo556]

Great for a single optic gamer rifle 👍🏼

[@kalanipitmon7817]

@@HotelBravo556 uhh what?..

[@Still_awake19]

How do you like the adm 1.93? Looking at the recon and trying to decide between the 1.64 and 1.93

[@jvmicc2]

Closed emitter.....This is the way.

[@Pays2Win]

400 plus for a mount is fn ridiculous. Quality kit no doubt but wholly shit are they pricy.

[@sneakydingo3079]

Why is it when I’m looking for this spuhr mount I can’t find it at all, but when I finally do I change my mind and can’t find anyone to buy it 😂😂😂

[@5five6x45]

WAY TO SHORT YOU HAVE TO SHOVE YOU CHEEK INTO THE STOCK! 😬

[@KineticConsulting]

Stop yelling

[@perlenbacher6788]

just buy a mount from a reputable manufacturer.