LS1 Ignition Coil Conversion (2SEXY)

[@GoofyDaGoofGoofTV]

"I think it's a really fun time to be around this kind of stuff, because you can use modern technology to make old stuff perform way better than you ever thought possible, and a lot of those components are portable like you buy ls1 coils and you buy a haltech 750 you can take it with you to your next car, thats probably worth more than this car but the point is you can learn you can put it on you can make it better you can have that experience and enjoyment and go and use the car and when you run it into a wall, pull it off and put it on a 180 and do a skid" - Marty

[@BradenCarlsonAutos]

Can confirm: Marty's new intercooler WILL fit on your honda.

[@DesuchanSugoi]

That means you can put his old one on The Steve.

[@AfferbeckBeats]

His old one won't even fit in the boot

[@JakeDrivesHondas]

Ayyyyyy

[@leimomiguy-studebaker1733]

hey man,

[@dapa4]

I'm so jealous of your access to rust free cars. Road salt is a bitch.

[@roddydykes7053]

Importing is your friend, and also how they get a lot of their cars too

[@SinisterRubberDuckie]

well we dont have to worry about road salt in australia thats the main thing

[@dapa4]

FatboiiNicko We get like 200 inches of snow a year here. We use lots of it.

[@thecombatwombat833]

+fatboiinicko but you gotta be careful with the older models living near the ocean. lots of rust

[@AfferbeckBeats]

Yeah I don't see a lot of rusty cars here. Usually a few spots in the usual places like door sills, but that's about it. Really rusty cars mostly only come with negligence here. Like the poor old 50's American thing I always see parked in someone's driveway. It's rusty and it's just been sitting in the rain for months. Like at least put a tarp on it dude.

[@bigbuckoramma]

Man, that Willy Wonka joke couldn't be any better/worse timed with the passing of Gene Wilder. I'm not offended, and this was clearly recorded before he died, but it stuck out to me, and made me have a bit of an "awww, man..." moment.

[@mightycarmods]

Yeah it's sad, he was a true legend

[@minecraftlegand19]

Not sure if you watch KidBehindACamera but exactly 1 day before Gene passed away him and his girlfriend played a prank on his dad about a certain scene from the movie

[@Tryptamine999]

I actually lost my shit at that joke, it was just so out of no where and made no sense

[@CostalRunner]

Same

[@slon9120]

RIP Willy Wonka

[@9se7en20]

These guys are on point. given me so many ideas..really helped me take my car plans to a whole new level. realizing that anything is possible but also probably not road legal.

[@ZERATIN11]

@mightycarmods so obviously this was recorded before genes death and i think its crazy how that reference was in there. youre not the only video ive seen recently before his death that had a reference. RIP gene.

[@mightycarmods]

Yeah it's sad news :(

[@ZERATIN11]

indeed :/ thanks for responding mates and thanks for the little chuckle in the reference. cant wait for the next goat to appear.

[@nicksnicknet]

I know right - so many references... RIP

[@wastintimez6280]

getting overbearing with commercial crap guys , but awesome vid ;)

[@wastintimez6280]

getting overbearing with commercial crap guys , but awesome vid ;)

[@mike.135i]

congrats on 2 mil +Mighty Car Mods

[@anndyman72]

I've been waiting many many episodes for Moog to play an intercooler like a harp again! Such sounds of automotive brilliance! Pity it was out of tune this time. MORE MOOG MORE!!!

[@markevens]

10:23 is the beautiful rant that encapsulates MCM and modern modding.

[@scottcavill4807]

They need to get a TDi and show us what they can do with a Diesel

[@allencollier9724]

put it in a skip cus they all sound like vans

[@pinsinus]

Totally. Build it for power and convert it to run on vegetable oil since they love corn juice so much!

[@jessebatemasteelsolutions]

the really should buy a mercedes diesel to drift with

[@scottcavill4807]

I would be fine with any diesel to be honest. Find something like a cheap VW Jetta Tdi and make it a coal burning skid beast! lol

[@k1er4n544]

dont diss the van top gears (old good top gear) supped up transit van was great

[@nimaforoughi7266]

Marty is a great wingman! Even when Moog offers a shipwreck of a joke Marty steps up with his supporting remarks, carrying the joke safely to the shore.

[@itscroc_]

Guys will you ever go back to japan and do something like you've done before in Chasing Midnight or Kei To The City?

[@tehidiotboys3010]

Hopefully :)

[@360chrisflip]

I'm still waiting for an episode with the Kei car, they brought back from Japan,

[@dlpereira]

+Chris Middleton Same!

[@TriggerdMelon]

are you on about the JDM Electric Turd?

[@dlpereira]

No, the Kei car they bought and tried to drift with in Japan.

[@dennisgerov2272]

Lol, I am watching this video while watching my sister which is 3 months old. She started smiling at your intro. Thank you :D

[@Coda5610]

Moog is 100% high as fuck!! 😂😂

[@tomahoks]

Naah, he's just ADHD...just sayin'😳

[@VCCOMM]

then fkn say it just sayin' fkn what

[@Sheehy223]

+VCCOMM You watch RCR too?

[@wanteds13]

Looks like he tried the homebrew bong they found in Taytay :))

[@Noxidsignorantia]

High off tofu

[@popnsplat]

Oh my god, YOU GUYS FIXED THE AUDIO BALANCE. THANK YOU!

[@Dappatho]

MCM need to do like a Kilowatt to Horsepower converter on screen... Just saying... REPJAMAICA

[@ImAzraa]

I think the Torque figure is much more transparent, since horsepower is simply swapping a 5252 factor around. Torque, of course, should be in Nm (Newton*Metre) ... at any rate, you can tell immediately that, say, 100KW = 134HP, a factor of 1.34

[@numinous4789]

It takes literally less than 10 seconds on Google o.0 LOL

[@garyoaksify]

whenever they do a dyno run they always tell us both KW and HP for all you people over seas.

[@SubOhm84]

Just multiply by 1.34

[@Dappatho]

Numinous but i don't wanna Google for 10 seconds

[@eliminatorxx713xx]

When you refresh at the right time. ohhhh I got the chills 👌

[@Folopolis]

How the hell did you know that Gene Wilder was going to die? Illuminatus!

[@mackenzief5280]

ikr

[@Sogard22]

so that's what killed him?

[@Prodriver33]

illuminutsacks!! oh shyt!!!

[@Triple259772]

Where does he say that?

[@Folopolis]

Triple259772 It's just a joke dude. The filming was done concurrently with the video about the 180 rear end, which came out before he died.

[@andriusGNR]

2000.000 MILS of subscribers,couldnt be happier ,you are going to be reaaly huge lads!!! Congratulations,need to do a celebration video come on, show some celebration of your success !!!

[@bandwagon240]

As awesome as Haltec stuff is, it's not exactly budget friendly. Megasquirt is the answer for the masses.

[@1ManWrenching]

Even MegaSquirt has been pricing themselves out of the budget market. They've never done a single cost reduction in the 15 years they've been making them.

[@bandwagon240]

+unaclocker You do know you can diy one from a kit, right? Less than 300 bucks usd can build you one. That's dirt.

[@FrancoisRouxChannel]

I live in South Africa, for about $350 you can buy a complete localy built ECU that has all the features a Megasquirt has and more, including but not limited to wide band closed loop lambda control, full sequential injection and ignition, 8 general purpose outputs that can be configured on any value the ECU reads or sends out and digital display outputs. We even have ECU's that go for as little as $180, that will run just about any engine you can think of, including rotaries. So in as far as awesomeness and quality goes we have a wide choice locally and the only reaon they aren't more widely known and used is because of where they come from.

[@bandwagon240]

+Francois Roux That information needs to be spread.

[@FrancoisRouxChannel]

Try Perfect Power's XMS system, which is the top of the line ones. We also have Spitronics which are more middle line but lately have been adding features to compete with the former but maintaining their prices. Then we have Dicktator, which have been used in aeroplanes because of their absolute reliability, they aren't so feature rich, but some of the fastest cars in our country still run these. Disclaimer: I'm not affiliated with any of these companies, I just think they deserve more exposure than they are getting.

[@chrisnorman1183]

@10:22 Marty - "I think its a really fun time to be around this kinda stuff, because you can use modern technology to make old stuff perform way better than you ever thought possible. And a lot of those components are portable, like you can buy a LS1 ***" You know the rest :)

[@cjolney]

anyone else find it strange how the willy Wonka reference was made, at the time not knowing what became of the star that played him

[@PoptartKingz]

Illuminati confirmed

[@timothyweed08]

I Know! that's what I've been thinking!

[@jacklemon8689]

was looking for this

[@Fi1del]

sinchronicity man . crazy shit

[@Solomon_RD]

hey you never know, he could have been talking about the Johnny Depp version

[@painey1661]

I can't believe you guys are going on TurboMax. I saw the ModMax at Mt Panorama last year. Can't wait to watch how it all happened again.

[@100thMkey]

"we put in a break light..." haha classic!

[@BeaudoinMotorsports]

That is one of the Coolest Mods you guys have done. Hands down.

[@credigy5889]

Was moog drunk for this episode?

[@lolatmyage]

Hes drunk in every episode

[@Coda5610]

Drunk or High lol

[@Sugomis]

+lolatmyage he's not drunk, it's unicorn dust

[@tjarsun]

Cocaine?

[@PhatPhinx]

I think martys high in some haha

[@drew5505]

Please do more videos on ignition systems. I fucking love the info in this video. I never realized the ignition system was so crucial to performance. I'm just a nerd who is to broke for school and, loves to find info like this.

[@joie0]

Badass shirt moog. PANTERA!!!

[@SaintTimid]

This episode blew my mind about how smart mechanics can become with conversions like these.

[@audiwankenobi361]

This was too daggone short!....I could barely eat a friggin bowl of cereal while watching this!...we need atleast 25 minutes of content! daggummit!

[@Sheeeeepies1]

dat feel when you see a new MCM vid come up.................................... love ya

[@chefdan87]

I would think drilling and adding a bolt to the cam gear would throw it out of balance and cause a vibration in the engine.

[@darcy3898]

I was thinking the same thing, I reckon you could use a counter weight of some sort though

[@chefdan87]

Darcy Maybe, there would have to be spoke directly opposed to where the first hole was drilled so it could be balanced. "Edit" Just watched that section again, and a counter weight could be added on that pulley, wasn't sure if it was a symmetrical pulley and not one with a odd number of spokes. They better hope that bolt holds on tight or they might have a "killer dowel pin" issue like the 12valve 5.9 cummins engines.

[@mightycarmods]

This isn't a formula 1 engine and we're referencing a tried and tested setup that's been going strong for over a year, it's not ideal but it's definitely done to a budget and works!

[@chefdan87]

Mighty Car Mods Right on, thanks for the reply. Always enjoy your videos, reminds me of when my friends and i would wrench on our trucks together.

[@7thmalice]

seems like it could wear out/overheat the pulley bearing

[@Logicalx]

You can use modern technology to make old stuff perform way better then you ever thought possible, and a lot of those components are portable, like; you buy LS1 coils and you buy a haltech 750, you can take it with to your next car. That's probably worth more than this car, but the point is you can learn, you can put it on, you can make it better, you can have experience that enjoyment, go and use the car. And when you run into a wall, pull it off put it in a 180 and go do a skid. - Marty

[@jameskempienski]

2,000,000 subs When you guys gonna buy the subscriber choice car??? been waiting for yearssssss, since you guys first told us you'd do it at 1,000,000 subs

[@eshansyed7541]

good Idea man!

[@jameskempienski]

Not an idea. They actually said they'd do it. A long time ago when they had 100,000 or a couple 100,000 they said they would run a poll and get what ever car they subscribers wanted when they reached 1,000,000 subs but they didn't expect their channel to grow so fast so they changed it to 2,000,000 subs.

[@eshansyed7541]

+[HOON] STREET what do u want? I want anything with rwd and something with a really high revving engine

[@dan_lazaro]

+Eshan Sharma Me I want anything that's a rwd, revs to 9k, v6, that's a Honda as well

[@julioshow8048]

Would love to see another Budget street cred Episode

[@devjock]

Aww yeah 2sexy is definitely starting to honour it's name. This build is so glorious. Can't wait to see it on the dragstrip.

[@Ward1706]

When you're so early, not even recommended videos come up. Also: _white_ MX-5? Hmm, you mean _your_ MX-5? Or is there another Miata in the future?

[@isaacderbs9993]

These outros are getting better and better

[@DubstepCamper]

moog wheres your mini? I dont see it much anymore :(

[@Solomon_RD]

+Thomas Craig pretty sure he's joking but I did flinch a little when I read that. It would be horrible to see such a clean car crushed

[@mcmtv2]

It'll be back on the show again later. Focusing on getting this nugget 180 running first.

[@k1er4n544]

can you wack a juicy v8 from monaro or holden in the 180 or do dragstrip monster to crush supergramps that would be great video for future

[@zososldier]

there are already a thousand videos on v8 swapped 180/240s. they don't need to make another one. they even did it already with the mad max s14.

[@ThatAussieBloke1]

Bet the next guy who owns it will put a chev badge on it coz it has "chevy" coil packs lol

[@01ryan10]

LOL yes

[@Sheehy223]

First it was a Mirage, then it was an Evo, and now it's a Commodore.

[@omarrubio5973]

+MaxTheKanuck also a subaru. because the turbo

[@robertolugo2228]

Juanga grabiel

[@AlexYeets]

I think it's a really fun time to be around this kind of stuff, because you can use modern technology to make old stuff perform way better than you ever thought possible, and a lot of those components are portable like you buy ls1 coils and you buy a haltech 750 you can take it with you to your next car, thats probably worth more than this car but the point is you can learn you can put it on you can make it better you can have that experience and enjoyment and go and use the car and when you run it into a wall, pull it off and put it on a 180 and do a skid

[@woud3404]

11:50 Won't the off center weight distribution in the pulley rip it apart?

[@caminoprojectUS]

eventually. the bigger concern is accelerated bearing wear

[@tojiroh]

Valid concerns, gents. But what would be the alternative?

[@drivethevan]

A small hole in the belt, a light on one side and a light sensor on the other.

[@woud3404]

You could paint the half of the center black, and half of the center white, to make a homebrew optical encoder.

[@andrewmartinshields]

thank god these episodes are free

[@Galactica1436]

Is it me or is Moog's 180 video like 100x better then this one?

[@AzeOfSpadez]

This was just short. I liked it

[@mauriceh7558]

you, i could not care less about another exhaust install or adding plastic bits but i love this episode

[@scottautoprep94]

Because you don't know much about cars

[@jongeddes09]

Typically, videos featuring Moog predominantly are more entertaining. The ones that feature Marty more are more technical and educational.

[@zautogoth_1628]

I love the outro! It reminded me of the "goofy fun" bits from driveway era MCM. If I'm honest, I really miss the dancing and techno music upon successful mod completion. If a person can't stop to have a little fun with what they do, why do it at all? Also, this is my first youtube comment ever!... and no I'm not a child , just not internet savvy.

[@PrincessZoey]

I love Aussie slang just "chev" not Chevy or Chevrolet. Just "Chev"

[@jacobnicolaou8432]

Everyone says chev dumbass

[@kodiak1010]

+Jacob Nicolaou Think before you speak. I live in the states and have never heard anyone say Chev lol.

[@seraphimvalkyrin4543]

Never heard anyone ever call it that.

[@camouflagecamaro99]

no one says that

[@nicholaswilson5671]

+grjsb13 everyone I know says chev. faster and easier

[@snakesolid6823]

when my day is crap and this video came up , best day ever :D

[@GrainyEffects]

Wait ls1 coils from........and ls1?

[@IIIErebusIII]

yes.

[@GrainyEffects]

The LoudAssasin o.o oh my

[@artvandelayimports]

where else would it come from

[@GrainyEffects]

RandomVideos x3 idk

[@artvandelayimports]

AEBROS Dickson coolio

[@brandonm6117]

you guys are smart. props on all your success with MCM

[@WolfKenneth]

180SX needs name and song like 2Sexy :)

[@1300l]

2cr44py? :P

[@jacobmartin2761]

TayTay has a song....... its goes a little like this brraaaaaap psshhhhhh..T

[@mikepeterson1791]

MOOG just discovered globalization. It's really cute watching him grow up!

[@jcmoto3529]

When are you guys gonna do a commodore?

[@lahbl]

These guys prefer to work on good cars.

[@calebpearson9273]

agreed

[@Sphyx-]

You must drive a ford?

[@calebpearson9273]

+Levi Neave my dad has an insane sleeper wagon

[@Sphyx-]

I own a ls1 WH Statesman but I can't drive it because I'm on my red ps man

[@tpmfilms5503]

Mighty car mods makes me happy! 🤘🏼

[@joelbradley9543]

You know the guy from willy Wonka just passed away the other day? (After you recorded it before you posted it)

[@jameskempienski]

are you mad?

[@joelbradley9543]

Not trying to bring you down, it is a neat tribute. (I really like your videos you guys are awesome)

[@joelbradley9543]

At Marty and Blair (not angry) I just thought I would let them know just because it is a coincidence.

[@ignoranceisbl1ss]

+[HOON] STREET I'm furious

[@joelbradley9543]

Sorry to hear that Quinn, I am sure they had no Ill intent, and they would take the pain you feel and turn it into something positive.

[@markokiller1018]

mighty car mods episode on my birthday best present ever

[@i3aac]

NOTIFICATION GOAT SQUAD

[@mightycarmods]

baaa

[@1ManWrenching]

Your cam will actually only be spinning at 3500rpm when the engine is at 7000rpm.

[@mightycarmods]

which is 10 times the rate of your doodle! Quite right good sir

[@hoolgeren]

+Mighty Car Mods 2SEXY does 14.000 rpm no prob.

[@Jndbgames]

+Holger Risløw 2sexy revs to 1,000,000 rpms.

[@hoolgeren]

+Vooore well.. shit.

[@butterspeenutz9294]

unaclocker Can you explain the problem ?

[@MattBorchert]

10/10 quality outro.

[@deathrabbit82]

There's a silent Moog in dumb. :)

[@kiqnkf3201]

Hey guys..... Air to air intercoolers are more like heat-sinks.... biggest is best... especially if you are running a too-small turbo, beating the shit out of the air, and heating it up, the more surface area the big cooler has, the cooler the air will be, which in turn cools exhaust temps, reducing under bonnet temps, etc... Also the weight of the cooler stores the cold, more weight, more stored coldness.. what about leaving the big one on, and using it as a water-to-air cooler core, and install a water to air under the bonnet? Check pressures both sides of the cooler too, no point losing 100 degrees in temp, while simultaneously losing 10 psi boost.... Remember, turning up the boost on a turbo that small to counteract intercooler restriction will push you up and right on the map, increasing turbo rpm (which dulls response up top) and highly likely into a decreased efficiency area of the map, further increasing air temps, and air volume, further increasing intercooler restriction, while also increasing exhaust back pressure (primarily against the exhaust wheel) reducing overall system efficiency, using more fuel per hp, causing you to have a heavier car anyway... not to mention increased flow vosticies on the internal plumbing... Or, just go get a borg warner s300-sx-e or similar, (maybe even an s200 sx-e) so as to not heat the air up as much to begin with? SHIT!!! Aircon condensor???? WHAT?!?!?! wait a minute, you already have a pre-mounted water-to-air heat exchanger, and you are going to REMOVE IT??? Dude...... duuuuuuuuude..... Shame really, there looks to be lots of room for a water air core behind the battery...

[@murraypcakes1250]

Maybe they will work on a Holden or Ford V8 someday?

[@misterawesome1234]

they did, theres a v8 in mod max

[@Thommybee-85]

and in a $2000 car track challenge one of them bought a vn v8

[@jdrok5026]

Reasure the v8 is mod max is a gm engine not a holden specific engine

[@TeamBoosted]

Been watching your videos for a few years! Just wanted to say thanks for the motivation. Your videos inspired our turbo build!

[@evoTimer]

Yo! That Porsche build is legit. Cheers!😎👍

[@TeamBoosted]

+evoTimer Thanks man, appreciate it!

[@StuntTriple]

Irrelevant comment because i havent watched the Episode

[@cj15941]

Love the notification!!! So stoked for this one!!

[@kmartnw]

Lmao @ 9:00 😂

[@kmartnw]

and @ 11:30

[@sachideshmane5088]

Moog, the best way to make a situation less awkward for yourself is to make it more awkward for everyone else.

[@kaynec3079]

I searched for Faceballs I should of had safe search on :-0

[@Karlos305]

Moog was pure fire this episode... Gold

[@jondoe6618]

just fyi in order for the cam to be spinning at 7000 rpms the motor would be spinning at 14000. I wanna see that!!

[@Sven3ST]

These guys deserve so much more views!

[@tomsimcock4885]

willy wonka jokes 😐

[@mightycarmods]

No jokes, and this was filmed before Gene passed, RIP>

[@pyro1324]

Alzheimer's is a bitch. We really need to support all of the research so that we can get rid of it for good.

[@simonowen5089]

"You can learn,you can put it on and make it better and have that experience and enjoyment,and when you run into a wall you can pull it off and put it in a 180 and do a skid"-Marty MCM 2016

[@MrUltraworld]

Just put the entire LS1 in there and stop fucking about.

[@mattcunningham3987]

This is the best channel ever watched every video so mad

[@krisuuuuuuuuuuu]

congrats on the 2,000,000 subs

[@dylanfranklin8118]

I heard that you guys got a tv show. Congratulations

[@troelsvonaa]

what an outro! never seen awkwardness this way! thanks for the laughs from Denmark!

[@bishorb.]

Moog's Video: Needs 20 minutes to change taillights Marty's Video: 15 minutes to upgrade coil packs

[@kelli217]

That was really nice and subtle sound editing on the intercooler. :D

[@OhioGuy82]

LS1. Making everything better since 1997!

[@VMPhilosophy]

I love when he does the harp intercooler thing

[@brodyobrien2782]

MCM you've saved the day

[@N54-]

Congrats on the 2 mil subs

[@moguls914]

I laughed really hard at the beginning of that outro - like, way too hard. Also, congratulations on 2 million subscribers!!!

[@ilanahamblin991]

Mighty Car Mods will be on Discovery Turbo channel ... Woooohoooo congrats making it

[@hobiewilliams4503]

mcm is a universal tutorial of what could be done in a driveway they need there own tv show

[@MetalHeadMat666]

Absolutely love that BPM shirt!

[@ibiixie]

These guys should honestly have a TV show :3

[@dinosoarskill17]

love that you're keeping ac 😎 great episode guys, my kind of mod

[@volatile2805]

The Haltec ECU, plus labor to install and set up, is worth more than 2SEXY. I love it XD

[@jimmybordner7452]

out of all the cars they have done, 2sexy is my favorite.

[@GioGuitarDude]

He's not lying about the giant intercooler. My 8"x15" intercooler keeps my truck's intake temps lower than it was when it was NA with just a cold air style intake with a cone filter.

[@ScrewUserNames6587]

And the amazing thing about Haltech is they'll tune your car remotely for you if they have experience with the build. I always wanted to try building and turboing an older Jeep inline 6, reason theyre a massive bullet-proof torque monster, so if you can build the motor so it can rev and then add boost and tons of fuel you have an intense amount of power.

[@Royal_Vengeance]

The intercooler harp joke is strangely satisfying XD.

[@Caliwroth]

Love the Bunnings 'make your own bracket' on the coil mount :'D

[@Someone-lk2ik]

Done this many time on many cars I have owned well worth the effort.

[@cameronrussell9362]

When you run it into a wall, pull it off, put it in a 180 and go and do a skid. Wise words from Marty!

[@equinoxgfx]

First off. Congrats on 2 Million! Also, if you watched the Kouki Conversion video. Then you would know that this was recorded a little while ago. So, the whole Willy Wonka joke was not on purpose.

[@SamWilliams78]

Well congrats on 2M. liked before I even watched it!

[@chunkysalad9650]

"I think it's a really fun time to be around this kind of stuff, because you can use modern technology to make old stuff perform way better than you ever thought possible, and a lot of those components are portable like you buy ls1 coils and you buy a haltech 750 you can take it with you to your next car, thats probably worth more than this car but the point is you can learn you can put it on you can make it better you can have that experience and enjoyment and go and use the car and when you run it into a wall, pull it off and put it on a 180 and do a skid" - Marty

[@AfferbeckBeats]

Inspirational

[@IsadoreWoW]

But will it blend? That is the question.

[@tojiroh]

MAKE IT MEME

[@VoidSixx]

"put it on a 180 and do a skid" lol that part tickles me more than it should. Like just one skid? lol

[@Michael0697]

I was laughing so hard at that outro guys, my god! I was in tears.