Thanks for shooting these videos!!!! I check you channel every night hoping for a new one. I love tearing apart sleds and modding them out. Keep up the great work
@muddigger427811 жыл бұрын
this show should be on tv
@PowerModzOfficial11 жыл бұрын
i like the way you think!
@muddigger427811 жыл бұрын
thank s
@brittanyhotte28763 жыл бұрын
So excited that you guys use Evan's Waterless Coolant! They make a great product and they are genuinely good people. I've used Evan's in my '68 Camaro drag car for two seasons and I couldn't be happier.
@PowerModzOfficial3 жыл бұрын
Thanks for sharing!
@jaybrownbitch11 жыл бұрын
Good find on the carb boots blew two sleds up from that. Thanks for the vids
@PowerModzOfficial11 жыл бұрын
Thanks for watching!
@PowerModzOfficial11 жыл бұрын
Hey thanks for your support!
@Revrider55011 жыл бұрын
Best sled build videos on KZbin hands down. Even the tear down vids are great, learning a lot!
@Mistermoeshmoe11 жыл бұрын
I really look forward to watching the rest of these, I enjoy it alot!
@PowerModzOfficial11 жыл бұрын
Thanks very much for that.
@codywieczorkiewicz833011 жыл бұрын
just an all around ausome guy love your stuff
@PowerModzOfficial11 жыл бұрын
That's the thing, - it's a waterless coolant, i see what you mean about a 50/50 coolant though - a pressurized system allows the boiling point to be higher - and that is why a water based system works. Evans boils - but not till 375 or so.
@Juelxx11 жыл бұрын
Highlight of the day, Every single time when you post a new video! :-)
@TheSomewhere6811 жыл бұрын
think this summer im going to try to build one..u have gave me many ideas...great videos i watch everyday....keep them going...cant wait to see what u do with that motor.Kaelba might be in the back finally...haha..happy sledding
@matthewcurtice34766 жыл бұрын
Great videos, very helpful and you throw in many pointers
@PowerModzOfficial11 жыл бұрын
Thanks!
@DoRC8 жыл бұрын
I've never seen that hydraulic method with the water. That was cool!
@PowerModzOfficial11 жыл бұрын
They are going on the rev!
@Aspired32911 жыл бұрын
I'd suggest a forum for questions not about his build. Lots more people there to help and much more oriented towards questions. This is one guy and he is busy but it's still starving for fuel if you have to choke it your cutting the air which richens the air to fuel mixture and keeps it running. I'd say something is still dirty in the car(s) or also could just be old crappy gas. New gas, reclean carbs, verify fuel pump operation.
@larzyman296211 жыл бұрын
if you are struggling with the water clutch metod you can fill it with grease, dont think you need teflon tape. more cleaning tough... :)
@NVMDSTEvil11 жыл бұрын
I dont see any comments on this, but in your video you mention "no pressure is a good thing" with regard to the evan's waterless coolant. To be truthful the pressure in the system helps thermal transfer and increases the boil temperature of the coolant. If the waterless coolant is working fine for you then its no biggie, but lack of pressure for a water based coolant can be detrimental to its performance. Nice videos btw :)
@PowerModzOfficial11 жыл бұрын
Yup they do that.
@peterwalter51062 жыл бұрын
Amazing series man
@PowerModzOfficial11 жыл бұрын
Good idea!
@SchuttsMechanical11 жыл бұрын
Hey i like how your finally making your videos longer (: so much better then the 5 min ones keep up with the great videos and also the lengths of them
@ryanverrecchia11 жыл бұрын
@DDsleding it would be around $1,500 out the door losses the tension straps and that would help a lot also
@PowerModzOfficial11 жыл бұрын
Doing the best I can!
@edogaming74346 жыл бұрын
I like how there is a kid in the background
@bezrq11 жыл бұрын
Nice work!
@soups83073 жыл бұрын
Would really like to know what after market shocks fit on the sc- skids I tried some fox floats and that’s no good! Lou any options for shocks or straight swapping the skid? Perhaps Polaris 136 dragon? Thanks!
@PowerModzOfficial11 жыл бұрын
Contact Joey at Ibackshift and tell him i sent you - the dealers wont be able to clutch your sled. gearing wont cost much - buy used gears and chain on ebay - ask around to see what people are using on the forums. the 500 wont be an animal but its a good sled.
@giantLUKE211 жыл бұрын
learn so much from these!
@PowerModzOfficial11 жыл бұрын
Hey Jimmy, check out the rest of the videos, i use a drip bottle.
@flstfidevoe11 жыл бұрын
ive been waiting all day for this !!
@jimmyjones742711 жыл бұрын
GREAT SHOW!! Especially for guys like me who are new to sleds... I`d like to ditch the oil injection system too. Not so much for weight (I just have trust issues) but what do you do about oil to the crank bearings?
@TheTissueguy2 жыл бұрын
Great job! I wish your boy in the background was right there with you watching and helping you, rather then on his iPad or whatever the device was.
@PowerModzOfficial2 жыл бұрын
He is now!
@danielem17511 жыл бұрын
Very nice man, im following this project from now on! I also have some questions I hope you could answer, the first is what grease you would use for the crankshaft in the 800 engine, also if you have a project thread or similar for the dark green Rev that stands in the background? // Summit Rev 800 Owner! ;)
@PowderFilmsPro11 жыл бұрын
i love the color of the modded rev in the background i like that greenish color, when will part 3 uploaded?
@JustAnotherViewer-11 жыл бұрын
and eventually ship world wide, i would definitely buy
@PowerModzOfficial11 жыл бұрын
If only i had the time!
@zebtqb111 жыл бұрын
i blew a piston on my sled because of the reed cage holder good thing you fixed it before it happened to you.
@mattwiederhoeft72738 жыл бұрын
Did paint the sled black yourself or did someone else do it for you?
@jiipee66185 жыл бұрын
2019 anyone?
@Tristanhart7711 жыл бұрын
hey ishobie i have a 2004 polaris switchback 800 and is over heating the sled works fine when in powder but when on a trail at 4500 rpms it boggs out ... So what do you think is going one
@haydendavis60027 жыл бұрын
I found a $2500 2003 ski doo mxz 800. Is it a good snowmobile or will it be crap
@PowerModzOfficial11 жыл бұрын
No - different timing and comp settings.
@austinwyman42711 жыл бұрын
hey man, I need some help. I have a 1971 ski whiz 400sst with a 340cc six bolt jlo with a tillotson carb and when I leave it idle it pulses and shuts off and I need to use the choke to get it going again. the needles are set perfectly, I just put a full rebuild in the carb and fuel pump, and there is brand new filters and lines from front to back. I can't find the problem, can you help? PLEASE?
@martincaya133511 жыл бұрын
where do you live in quebec cause theirs a quebec plack on their?
@slimjim11911 жыл бұрын
good job
@sandchar10 жыл бұрын
for all i know my carbs been on there since 76
@BrowerBandit11 жыл бұрын
you dont need to change the fuel pumps just put on a new diaphragm and blow it out with the air compresses.
@Ricknil8811 жыл бұрын
i used the clutch metod but with hydralic fluid insted..
@PowerModzOfficial11 жыл бұрын
Happens often
@pikeperformance86428 жыл бұрын
use a heavy oil to pull the clutch. you won't need teflon tape
@TopRankedKilla11 жыл бұрын
What's wrong wit having oil injected sled? cause i have one and now im second guessing it; :P
@DDsleding11 жыл бұрын
Hey i have an 05 mxz 500ss i was wondering if i put a clutch kit on and maybe changed the gearing how much it would cost i would probly do it through my dealer a ruff estimate would be good and with the clutch kit i would like to be able to do wheelies
@SchuttsMechanical11 жыл бұрын
Alright thanks
@Jeremyscustoms9 жыл бұрын
Once you get the clutch off how does it go back on??
@SLEDNECK121511 жыл бұрын
at 00:41 did anyone else notice the kid sittin there? hahaha
@PowderRide3411 жыл бұрын
What year is it? I'm looking to get a rev 600 or tnt 600
@jessietober2 жыл бұрын
Hey man i have a 06 rev 800 i swapped a 02 800 in it and changed my head over for knock sensor but i still have an engine light cause i rave valves dont have hoses anymore or the hose to the crank to the solinod any help would be nice?
@PowerModzOfficial2 жыл бұрын
hmm, is the engine light flashing?
@PowerModzOfficial11 жыл бұрын
Thanks but then its a job and theres no fun in that!
@TeamBondeMeck11 жыл бұрын
what was the name on the webbsite you buoght the reinforcement? :D
@PowerModzOfficial11 жыл бұрын
Because I can't buy every type of snowmobile, I am not made of money:)
@willemerson85273 жыл бұрын
Why is the 2x4 your favorite tool. 😂😂😂
@PowerModzOfficial3 жыл бұрын
Because it is a hammer - everything else is a nail
@derekjolly98154 жыл бұрын
You should have called this episode "Pounding the Nun" heheheh!!!
@PowerModzOfficial4 жыл бұрын
LOL, I like that!
@laurN7711 жыл бұрын
Too bad the zx didnt perform the way you wanted, this rev chassis with the all those mods will rip forsure!
@PowerModzOfficial11 жыл бұрын
tonight - late!
@curtsawchik868510 жыл бұрын
Hey. I was looking at my 2003 rev 800 and i notices that my shock shaft was bent on the left side. and also on the ride side the shock is touching the back of the a arm. The skis are pretty much even, i dont think one is farther back that the other. I measured them and they were only off by 1/2 inch. But the right ski is also toad in a little. I looked at all my a arm mounts and they all looked straight. And the nun looked like it was good to. Do you have any idias why its like that? thanks btw were can i get your new oil? PowerModz
@PowerModzOfficial10 жыл бұрын
your nun is bent:) The new oil will be available soon - are you near ottawa?
@curtsawchik868510 жыл бұрын
PowerModz Damn is it bad to run it like that? idk if i will even notice it. But I am in New hampshire so im like just under 5 hours away im pretty sure.
@PowerModzOfficial10 жыл бұрын
ya itlll bend really easy now - and you'll bend a shock shaft.
@curtsawchik868510 жыл бұрын
PowerModz okay thanks for replying. im probably gunna just run it and see how things go. hopefully its fine. im pretty sure its not bent that bad. but thanks again.
@PowerModzOfficial11 жыл бұрын
Nono - not that much.
@arcticat4evr11 жыл бұрын
you can sell one of those sleds for a cat
@PowerModzOfficial11 жыл бұрын
2003
@SuperTrek650011 жыл бұрын
you should mod an xcr 440
@TOPROLLER10111 жыл бұрын
hello I have a 700 for parts ?
@jorgemartinic854911 жыл бұрын
hello my name is jorge I'm a a rookie in the matter of sleds But I don´t know pretty much nothing about the mecanics or how keep up for my sled... and where I am from we don´t have to much culture so I don´t have anybody to ask for advices, I am really enjoing this videos!
@jorgemartinic854911 жыл бұрын
But I wanted to ask you is it posible to go there and get a few lessons and how much would it cost me? I live to you my email adress: georgemartinic@hotmail.com hope to hear from you!
@hiltonamos400710 жыл бұрын
look for snowmobile forums,, the guys on them are very help full with brand specific info (
@papabits57213 жыл бұрын
I spend more time looking for stuff I supposedly put away.
@fasttoys9911 жыл бұрын
Well, when you have 1000 hours and $7000 in parts into a 10 year old sled that's hard to sell to anyone that's even kinda smart.
@PowerModzOfficial11 жыл бұрын
Quebec
@PowerModzOfficial11 жыл бұрын
lol, camera kid!
@TheGaliath3609 жыл бұрын
this is great, I love these videos, but you could have saved yourself 6+ hours of work and a hassle with all the old parts if you just bought yourself a used chassis. Why not just buy a previously parted out sled with barely anything in it? You did end up just taking everything out of the sled.
@PowerModzOfficial9 жыл бұрын
Why spend more money! And it's a good learning experience - no ownership changing - paying taxes etc etc.
@TheGaliath3609 жыл бұрын
PowerModz I agree! I love what you did with the sled. I hope one day I get the opportunity to have a small shop so I can do the same work. Thank you for posting these videos! Very informative and interesting.
@hotgixxer0211 жыл бұрын
You need to quit your job and just start building sleds for people around town.