LT-01(QS-S4) Kaabo Standard Display Settings and Overview

  Рет қаралды 48,319

Epic Cycles

Epic Cycles

Күн бұрын

Пікірлер: 119
@StephenBrown-l5t
@StephenBrown-l5t Жыл бұрын
Thank you so much, I searched for this and found the old password which obviously didn't work and was sooo disappointed I wanted to return it and go for a refund. I have the Mantis 10 v2 and it is now a delight to ride....once again well done, please keep up with your answer to the nanny states.
@epiccycles9
@epiccycles9 Жыл бұрын
Glad we could help!
@10laws2liveby
@10laws2liveby 6 ай бұрын
It's such a pleasure to see a good ,informative video which yours is, thank you
@hesquelet
@hesquelet 2 жыл бұрын
Is there a way to reset to factory settings?
@Irishkiwi
@Irishkiwi Жыл бұрын
Nope
@willham8062
@willham8062 2 ай бұрын
Best video I found. THANK YOU!!
@shelbytheriault2108
@shelbytheriault2108 Жыл бұрын
Thank you for the password to the settings!!! Very helpful video 😊
@suncruiser00
@suncruiser00 2 жыл бұрын
Great video man!!! Helped out a lot!! Thanks man. I just got the warrior x.
@arthandmade741
@arthandmade741 Жыл бұрын
Thank you so much. I just bought it and all clear.❤
@Freo95
@Freo95 11 ай бұрын
How do you save the password? I have to keep entering the password everytime i want to change the settings. Your help is much appreciated, thanks.
@epiccycles9
@epiccycles9 11 ай бұрын
Unfortunately there is no way to save the password. I know what you mean it gets annoying having to keep entering it I. And it times out rather quickly but there’s no way around it, you will need to enter the password each time.
@masonhope
@masonhope 2 жыл бұрын
Any idea how I can setup the LT01 to have different speeds in the 3 gears. At max or above 70(P9) I can see a difference but if I set it lower while trying to get gear 1 to max out at 25kms/he to meet the Reg here in Australia all 3 gears are almost exactly the same speed.
@epiccycles9
@epiccycles9 2 жыл бұрын
Hello, this is possible - you would have to bring it in to your local scooter shop for a mechanic to do for you.
@masonhope
@masonhope 2 жыл бұрын
@@epiccycles9 many thanks. I’ll call the dealer tomorrow.
@masonhope
@masonhope 2 жыл бұрын
@@epiccycles9 thanks. I’ve just taken it to the dealer I bought it from. He says there’s nothing he can do other than change P9. Any thoughts?
@briancortez2860
@briancortez2860 7 ай бұрын
Muchas Gracias muy bien explicado, Lo Máximo 💪
@sle2979
@sle2979 26 күн бұрын
Can you change this display to the wolf king 3.5-inch display?
@Airbornealltheway88
@Airbornealltheway88 Жыл бұрын
Hi. So I just got the mantis 8 and got it set up. I charged it and my screen is flickering. I tried to get into the settings but the screen just flickers and then Cuts out. Now the light is on the display but I can’t see anything. Is the switch bad?
@zbret
@zbret Жыл бұрын
I had the same problem. Looks like changing brightness (Pc) is a bad idea, but it could have been a coincidence. It started at 3 (max), at 2 it dimmed, and at 1 it flickered and died. Can't get it to run to change it. Maybe need to reflash or something? But with what, I'm not sure.
@Airbornealltheway88
@Airbornealltheway88 Жыл бұрын
@@zbret I got it fixed. It’s a bad screen. I sent kaabo a video on what’s going on. They sent a new screen out. But with their slow time in communication. I just bought another. It fixed the situation.
@zbret
@zbret Жыл бұрын
​@@Airbornealltheway88 Thanks! I actually just posted a vid of this at v=8Q5qebzvZbE, and was considering getting a new screen, but they sell them for $60 on their site and my scooter is 1 day old. I can find similar looking displays but not the same model name as the Kaabo. Kabbo uses LT-01, but there are TF-100, QS-S4, etc and they are usually cheaper. Plus most ship from China and take 2-3 weeks to arrive which I'd rather get them faster. How long did they take to reply? I wound up posting a comment on their page at v=zSzxYfhKePo Note if confused about the "v" codes, they are for videos, just put it in after the "watch" in the browser to see them. YT comments block links.
@johnhammel6277
@johnhammel6277 Жыл бұрын
@@Airbornealltheway88i literally have the same issue and emailed them I’ve had the scooter two days there sending me a new display seems like a common issue
@Airbornealltheway88
@Airbornealltheway88 Жыл бұрын
@@johnhammel6277 it took forever too. I ordered one off another website. But it took like 3 week’s coming from kaabo. Now I got 2 just in case. I don’t think I’ll be ordering another kaabo. I put 200 miles on it so far and not to happy about it. Still a fun scooter but the stem is starting to get loose no matter how tight I put it. The rear turn signal is out. The tires suck when they start to get low. So stay away from rocks. I take really good care of this scooter too.
@MrPATMON12
@MrPATMON12 Жыл бұрын
hi, it can be determined by the battery voltage to what percentage the scooter is charged. I don't want to charge it to one hundred percent all the time. I want to charge up to approx. 80%, thanks for the advice.
@davidmurray5848
@davidmurray5848 Жыл бұрын
65v would be about 80 percent 67.2 is 100percent. 54v is dead
@kieransteel3450
@kieransteel3450 2 жыл бұрын
My kaabo wolf warrior pro 10 will only go 20mph any advice
@epiccycles9
@epiccycles9 2 жыл бұрын
Hello. It could be a few possibilities. 1. the eco/throttle switch is broken. 2. the controller: If you replaced a controller, there could be a speed limiter. 3. If the battery voltage is reading low, it could be that there is not enough battery power to get you up to the high speed. Hope this helps.
@monchistop
@monchistop 4 ай бұрын
Hola para una batería de 60v a qué voltaje debería estar En el parámetro p1?
@Dan-sw1nb
@Dan-sw1nb Жыл бұрын
Is this display visible in sunlight? I read somewhere it's difficult to read it clearly in sunlight.
@maksitooobg2367
@maksitooobg2367 Жыл бұрын
Thanks alot but watched it several times and still don't understand what's the CH feature?
@enezetaeme
@enezetaeme Жыл бұрын
How can I reset the PA, since I want the mileage to start from zero after my complete maintenance of the scooter
@MrDeceptacon88
@MrDeceptacon88 9 ай бұрын
Can I adjust P3? Isnt this to adjust your top speed??
@blakecock2518
@blakecock2518 Жыл бұрын
Hey, do you know why my scooter drops battery when driving it shows full charge but when going past 25km the battery drops to 1 bar than goes back up when slowing down
@CameronMcDonald-o3y
@CameronMcDonald-o3y Жыл бұрын
Any ideal why a wolf warrior x is showing 55mph on the display. It's there while it's idle and when riding. Everything seems to work otherwise and the P-settings are correct. It's set to bump start and it does need a bump before it will accelerate.
@epiccycles9
@epiccycles9 Жыл бұрын
It’s possible there might be a problem with the display or controller. We would advise to bring it in to your local shop to troubleshoot both issues.
@CameronMcDonald-o3y
@CameronMcDonald-o3y 10 ай бұрын
@@epiccycles9I was able to change a p-setting and then change it back to what it was. This fixed it. Odd error.
@gabrielmarcano7222
@gabrielmarcano7222 2 жыл бұрын
Hello. I opened the display to clean it but after I assemble it turns it on but does not accelerate when I press the trigger. Do you know what could have happened?
@epiccycles9
@epiccycles9 2 жыл бұрын
Hello, first check to see if all your wires are connected securely and properly.
@lightangel112
@lightangel112 Жыл бұрын
Maybe lost the little magnet on the back of the throttle lever?
@jimbo3049
@jimbo3049 2 жыл бұрын
Hi i got the 2021 modell and i have a error code that popping up E-10 and then i shut off the scooter and the error disapears and comes back again after maby 15min. Do you know what this is ? :S
@epiccycles9
@epiccycles9 2 жыл бұрын
E-10 error code usually represents there is a problem with your controller. You will proably need to replace the controller to eliminate this error.
@magicchef4938
@magicchef4938 2 жыл бұрын
I recently had this E10 error as well on my 2021 mantis 10 v2, everything worked fine except speed readout. I swapped the display and so far so good, error no more..
@jimbo3049
@jimbo3049 2 жыл бұрын
I changed the brake settings and the error have not been up since that
@bax81
@bax81 Жыл бұрын
perfect, thx for infomation about voltages
@pixelskyphotography2556
@pixelskyphotography2556 Жыл бұрын
What should the Kaabo Skywalker 10 c setting be for p2
@benedictjones6369
@benedictjones6369 2 жыл бұрын
My display stopped working today (LT-01) on a Wolf Warrior 11. It was fine and then I turned it off for 5 minutes back on and display won't turn on now. Any tips? :/
@epiccycles9
@epiccycles9 2 жыл бұрын
Check the connectors between the display and controller, sometimes the wire gets tugged or pulled on and it gets loose.
@benedictjones6369
@benedictjones6369 2 жыл бұрын
@@epiccycles9 I already did it wasn't that. Could it be inside the scooter if I open it up?
@nafi.j
@nafi.j 11 ай бұрын
I bought a LT01 thumb throttle from ALi but it doesn't turn on. I am using it on my Kaabo Wolf Warrior 11.
@REDLIGHTNING21
@REDLIGHTNING21 2 жыл бұрын
hello sorry if I disturb, I have recently purchased a kirin G1 and in the P 03 program section I cannot understand what this parameter is for and what to set, let's say that I am quite inexperienced in this regard, and I would not want to ruin the scooter. Can you help me please? Many thanks in advance. My kirin is 52v can you give me a hint?
@epiccycles9
@epiccycles9 2 жыл бұрын
P3 is speed selection setting. Usually set by the facotry to 0. Do not make any changes to this setting.
@JakDac
@JakDac 7 ай бұрын
Mine shows low battery even when full any fix ?
@ProjectQua
@ProjectQua 2 ай бұрын
i think it’s normal
@piccolociccioo
@piccolociccioo 2 жыл бұрын
Io ho questo computer qs-s4 e monto una batteria Lg 72v 32ah monopattino zero11x P03 - Voltage level of machine 72 giusto ? e P15 - Controller cutoff voltage?
@dono1982
@dono1982 2 жыл бұрын
Thank you. Wery helpfull
@epiccycles9
@epiccycles9 2 жыл бұрын
Glad it helped!
@krisztinabalogh4911
@krisztinabalogh4911 Жыл бұрын
Hello i changed the PC to 2 and i cant see nothing. The scooter is working but the screen is not , how can i fix it
@epiccycles9
@epiccycles9 Жыл бұрын
Hello, please give your local scooter repair shop a call to further discuss.
@edwardarrogante9978
@edwardarrogante9978 Жыл бұрын
Good day Sir, same on kaabo Skywalker 8H?
@epiccycles9
@epiccycles9 Жыл бұрын
Hello, we do not carry that model of scooter to confirm. Please refer to the Skywalker 8H owners manual.
@Dailyn_Chanel
@Dailyn_Chanel 2 жыл бұрын
P7 is wrong, it should be 0= soft 1=stronger acceleration
@sergedna
@sergedna 2 жыл бұрын
only on 2022 model, they also have cruise control
@jackcarter9003
@jackcarter9003 Жыл бұрын
What about 36v?
@123kingyandhisqueenspublic6
@123kingyandhisqueenspublic6 9 ай бұрын
I just brought a wolf warrior x plus 2023 and I've tried 1500 and 9221 and neither of them work why is that
@epiccycles9
@epiccycles9 9 ай бұрын
Typically it's always 1500 since 2022. i would reach out to the retailer you purchased it from and ask them, otherwise you can contact Kaabo and provide them with the serial number. They should be able to track it down based on that.
@enn3788
@enn3788 2 жыл бұрын
Hey, having this issue that my speedomoter isnt showing the correct speed...shows more than it actually is.. Can it be the case that if my maximum speed is set to etc 70% and while it goes 25km/h it still shows 37 km/h on my speedomoter. Or what might be the case? Every setting is correct.
@barrynisan5686
@barrynisan5686 2 жыл бұрын
Your tire size setting in P0 is likely incorrect. Probablly set at a smaller size than it actually is.
@mike20xp
@mike20xp Жыл бұрын
How can i modify de battery voltage?
@epiccycles9
@epiccycles9 Жыл бұрын
Hello, You can change the battery voltage on your display. Please refer to your product manual for more detailed instructions.
@amundgalaenlien7237
@amundgalaenlien7237 2 жыл бұрын
Is there any way to change the code to enter the p settings?
@epiccycles9
@epiccycles9 2 жыл бұрын
Hi Amund. You cannot change the code to enter in the P settings. This is hard coded by the factory.
@bplynch834
@bplynch834 2 жыл бұрын
Hi there I have the mantis eighthe mantis 8 and I have the LT01 is 01 displaying. I have the error code E 10 Everything works fantastic all the lights everything however. The display where it shows miles per hour when you hit the throttle it doesn't show miles per hour but the scooter does work fantastic Do you have an idea what might be wrong with that if if I need a new display how would I change out the display
@epiccycles9
@epiccycles9 2 жыл бұрын
Hello.E10 error means communication issue between display unit and controller. There are three things that can go wrong: display throttle, wire connecting the display throttle and controller and controller. You can play with the wire by moving around and see if the error goes away, the most common cause is the display throttle which needs to be replaced.
@lightangel112
@lightangel112 Жыл бұрын
Its the little magnet on the back of the throttle I glued it in better
@mrniceguy0531
@mrniceguy0531 2 жыл бұрын
hi there im thinking og buying the wol warrior x pro+ to your website and does it come with hybrid off road tires only?coz i want some street tires too!is the X pro+ was the improve version of the pro coz i watch some review about the rear fender grinding the rear tires too!
@epiccycles9
@epiccycles9 2 жыл бұрын
We also sell, CST 10" x 3.0 Street Tires that would work. Here is the link: epiccycles.ca/product/spare-parts/bikeparts/scooter-tire-tubes/mantis-3-0-street-tire/ If you want us to swap them out for you we can for an additional $120 labor fee. If you want to keep the original off-road tires the cost of of the street tires will be $65 each otherwise we can just do a stragiht swap if we keep them and you only pay for the labor fee.
@bplynch834
@bplynch834 Жыл бұрын
I have the mantis 8. This morning I turned on my scooter And it turned on. However I tried to kick start the scooter it would not go anywhere. I have a new controller throttle controller. It does turn on but there's no power it won't go anywhere any ideas
@epiccycles9
@epiccycles9 Жыл бұрын
With this kind of symptom, the brake sensors are needed to be checked by unplugging left and right cables (located under the brake levers) and try to throttle it to see if it fix the problem or not. If the problem persists, please send us an email to info@epiccycles.ca
@bplynch834
@bplynch834 Жыл бұрын
@Epic Cycles thank u for your reply I will do that..very helpful
@bplynch834
@bplynch834 Жыл бұрын
@Epic Cycles would u kindly send a pic of the left and right cables need to be unplugged
@epiccycles9
@epiccycles9 Жыл бұрын
@@bplynch834 You're very welcome! Fingers crossed this fixes your scooter.
@epiccycles9
@epiccycles9 Жыл бұрын
​@@bplynch834 Unfortunately I can not upload a photo here. But you can place your hand on the brake and trace the wire back to the connection.
@nicholashpitts
@nicholashpitts 9 ай бұрын
Thank you!
@javiergiraldez1647
@javiergiraldez1647 9 ай бұрын
What if I don’t have any power on display
@epiccycles9
@epiccycles9 9 ай бұрын
You may have a defective display but could also be something else not functioning. Best to bring it into a local shop that sells this type of scooter and has extra parts to trouble shoot and diagnose the problem for you.
@rheeceholmes9922
@rheeceholmes9922 Жыл бұрын
When I try change p7 it won’t go past 1
@icubeebuci5972
@icubeebuci5972 Жыл бұрын
Yeah because it’s either 0 or 1
@mattemann
@mattemann Жыл бұрын
sabes como hacer factory reset en zero 10x?
@epiccycles9
@epiccycles9 Жыл бұрын
Hello, we do not have this model. Please refer to your owners manual, or contact the company you purchased it from.
@David-mh8sw
@David-mh8sw 2 жыл бұрын
I also have the E-10 error but everything works. Only the front light doesn't come on out of nowhere, but the horn works. I have a v2 10 plus
@bplynch834
@bplynch834 2 жыл бұрын
I have the same issue but everything works fine but the display the miles per hour doesn't do anything it's it just reads Error code E10
@อภิเดชสุรเดช
@อภิเดชสุรเดช 2 ай бұрын
E10 how repair.
@gregorvhtr
@gregorvhtr 2 жыл бұрын
Can you remove the code? And how to factory reset P settings?
@epiccycles9
@epiccycles9 2 жыл бұрын
Unfortunatley there is no way to remove the code nor is there a factory reset for P Settings. We wish there was a way as well : )
@УколвВАТУ
@УколвВАТУ 2 жыл бұрын
@@epiccycles9 (QS-S4) Hi,where can I get my code, the seller did not say when buying?
@sergedna
@sergedna 2 жыл бұрын
@@УколвВАТУ 1500 or 9221
@USMCSSgtRetired
@USMCSSgtRetired 2 жыл бұрын
When it’s powered on and you hold down “mode,” a blue headlight icon is displayed. What does this mean?
@jmabs1958
@jmabs1958 2 жыл бұрын
I noticed it also
@epiccycles9
@epiccycles9 2 жыл бұрын
Hello. If the scooter had a headlight, it would mean the headlight is activated.
@HADESNYC
@HADESNYC 2 жыл бұрын
Nice
@HappY-ot7nc
@HappY-ot7nc Жыл бұрын
Hello i am just riding my kaabo wolf warrior 11 and i turn it off and turn it on later it shows 18902km in it while i only have like 610km , it just dropped instantly
@epiccycles9
@epiccycles9 Жыл бұрын
Hello. Did you purchase your scooter used? We would suggest bringing it into your local e-scooter repair shop to have it assessed.
@samdredge5849
@samdredge5849 2 жыл бұрын
Can I put a QS-S4 display on a wolf warrior x base model?
@epiccycles9
@epiccycles9 2 жыл бұрын
Yes, either the Qs-S4 for LT-01 will work on a Wolf Warrior X base model (not mini motors system)
@budspencer293
@budspencer293 2 жыл бұрын
THX
@rheeceholmes9922
@rheeceholmes9922 Жыл бұрын
Wolf warrior x unlocking
@epiccycles9
@epiccycles9 Жыл бұрын
kzbin.info/www/bejne/qZfQi2evlK53jrMsi=Z8rX7QKBUK1Oi8AA
@REDLIGHTNING21
@REDLIGHTNING21 2 жыл бұрын
My computer on bordo qs-s4
@epiccycles9
@epiccycles9 2 жыл бұрын
Yes, this is simalr to the one showns in this video
@bishyeahbish3758
@bishyeahbish3758 6 ай бұрын
Its crazy that Barry Nisan doesn't work at Nissan I mean c'mon man they'd surely give you a job just because of your name wouldn't they 😂
@РинатР-т3е
@РинатР-т3е 8 ай бұрын
Бля Рахмет еле нашел хэлп к этому курку
Minimotors EY3 Display Overview
16:27
Epic Cycles
Рет қаралды 10 М.
Kaabo TFT display settings and how to use
13:05
Epic Cycles
Рет қаралды 26 М.
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН
Kaabo Mantis base display settings
11:27
fluidfreeride
Рет қаралды 130 М.
Open and Assemble QS-S4 LCD Throttle
7:51
ORDOOspeed Official Support Center
Рет қаралды 7 М.
Kaabo Mantis - causes for stem wobble
6:29
ralf halbknapp
Рет қаралды 28 М.
Display kaabo mantis -dashboard
2:37
i-move
Рет қаралды 16 М.
The Wolfpack! Comparing the "Wolf Warrior" range from Kaabo!
17:44
RIDE & GLIDE
Рет қаралды 79 М.
Kaabo Mantis PRO Display settings
12:17
fluidfreeride
Рет қаралды 74 М.