LT Wright Knife Buying Guide | Blade Length, Grind, and Steel

[@alexmalloy3273]

I wish you got more publicity, you make great videos with solid content. I only say this because I don’t want you to stop making videos haha.

[@SurvivoTek]

Thank you so much! Seriously, it's super encouraging to read this.

[@callum698]

Couldn't agree more! The bloke is a weapon , content is indeed solid. Well edited and flows well, informative, entertaining .

[@joetexas1546]

Rogue River! small-yet powerful!

[@SurvivoTek]

I've never had the opportunity to try one out, but I've heard great things. Thanks for sharing, my friend.

[@lawrencewright9012]

Thank you for the information.

[@SurvivoTek]

Thank you for taking the time to watch.

[@uruk-]

Cool video, I'm really eying the Gary Wine Bushcrafter, not the hunter like yours, the smaller one. Very simple and nice shape I think

[@SurvivoTek]

Thank you for checking out the video! I haven't had a chance to try the smaller Bushcrafter, but if it's anything like the Hunter, I'm sure it's amazing.

[@LTWrightKnives]

Thanks for the great video, Jude!

[@SurvivoTek]

You're very welcome, and thank you for sponsoring it!

[@rogergagne1026]

Could anyone tell me what knives are available in convex

[@scotthill6807]

@@rogergagne1026 I'd suggest you get on the LT Wright web page and check. Also check the links to the Dealers pages. There are Convex grinds on some of the models. The Bushcrafter HC is a Convex. Hope this helps you.

[@Canadian_Craftsman]

Jude you always do an excellent and thorough job this was no exception!! Awesome review and basic knowledge breakdown take care my friend!!(=

[@SurvivoTek]

I can't help myself but talk too long about knives. Haha! Can you tell they are a passion of mine? ;)

[@Canadian_Craftsman]

@@SurvivoTek me three brother I've been wanting to develop a design like Chris tanner lucky SOB🤣✊🔥

[@SurvivoTek]

@@Canadian_Craftsman That's awesome! Any ideas who you'd want to produce it?

[@Canadian_Craftsman]

@@SurvivoTek I could dream of LT but not sure.. I did kinda a knife collaboration with Amsler knives on a cool Kiridashi color scheme he made the Hurricane Razor in the new Blade Runner movie

[@Primitivebearknives]

Love it!!!

[@SurvivoTek]

Thank you, brother! Can't get enough of LT's knives!

[@Primitivebearknives]

@@SurvivoTek agreed!

[@Primitivebearknives]

@@SurvivoTek ph by the way!!! If you would like shoot me a message in the PH and I can send you my large pouter to play with. Its AEB-L steel. I'd be more then happy to share and loan it out

[@SurvivoTek]

Thank you, man! I'll pm you now.

[@Primitivebearknives]

@@SurvivoTek got it!

[@townieoutdoors8121]

I want the GNS with a saber grind , I have a bk 17 now just not loving the clip point .

[@SurvivoTek]

The GNS Saber is phenomenal! I have had several in the past and just love them!

[@JonathanRobinson11]

Scandi GNS.

[@shadeshiest22]

I’m looking for a knife around 4.5inches long(or anything between 4-5inch) convexed edge, high(er ish) sabre grind(1/3rd?) in 3V, or near equal (or better) semi stainless…. Which LT Wright model should I be looking for???

[@SurvivoTek]

My first thought is either the Genesis or the GNS depending on what style of handle you prefer. LT does make them both in 3V and in either saber or convex, but most places are low inventory right now. Best bet would be to reach out to them and see when their next order will be shipped out to either knivesshipfree or dlt.

[@teresakines8888]

That background music is distracting and annoying.

[@LandonWills]

I don’t know how you don’t have more subs brother. Great job!

[@SurvivoTek]

I really appreciate the kind words, my friend. It's such an encouragement to know my videos are helpful.

[@LandonWills]

SurvivoTek they are, and done so well. Keep growing. Keep advertising your Channel, commenting on known channels, that’s how I found you. Keep it up 👍

[@Argonaut80]

Bought two today. Genesis, scandi ,A2, and Small northern hunter, High Saber, AEB-L. These, paired with a Wetterlings small forest ace, and bahco Laplander round out my cutting tools for my ruck.

[@SurvivoTek]

That's awesome! It's so exciting to get some new knives from LT! And sounds like you have a perfect system, too!

[@ColdHarborOP]

I have several patterns from LT but am most excited about the Bushbaby HC I just custom ordered in matte orange G-10 with a convex grind and a tiger pattern patina. Being a member of their internal forum, what they call the Pout House, is a great way to get your hands on more options.

[@johnthacker5171]

Carry a Patriot a Great edc blade

[@dennisleighton2812]

Hi there, I like your categories and mine are pretty similar. Let me explain my choices: Firstly I divide my knife choices into two categories: heavy carry and light carry. You did something similar. Heavy carry: Large knife: I agree a large knife would always be the option where heft and length are needed. Here I have a Cold Steel Trail Master (San Mai III, full convex grind). This design has set the pace for many decades and still makes most top 5 large knife lists. They are hand made in Japan and the workmanship of the fit & finish are of the highest order. Belt knife: Here I would go for something innovative and interesting, and the new Victorinox Venture Pro fits the bill. Its full flat grind blade is ideal for around camp work and versatile enough to function as a real bushcraft knife for carving, cutting, notching and feathersticking. It uses Sandvic 14C 28N steel which has served Victorinox well, and boasts some very interesting feature. Its 4+ inch blade is exactly the right length for this all-rounder. Small blade: Here I admit to a compromise (Which is debatable). I'd opt for a multi-tool knife for the sheer versatility of the many tools, including a functional 3-3 1/2 blade, as you mentioned. After watching Felix Immler's videos and having read his book, It became obvious just how useful such knives can be; one just has to learn how to capitalise on that. My choice: the Victorinox Hercules. Note: with any venture into "the wild" I would never be without a decent and appropriate folding saw, eg a Silky (or Bahco, if preferred). For heavy carry that would be the Bigboy Outback version. Also, I would not consider an axe, unless some sort of transport is involved (eg truck, car, quad bike, horse/donkey) for carrying loads. Using the tools above, and with wooden wedges, one can accomplish the tasks that need to be done. An axe is too heavy, bulky and is basically a one use implement (if one has the tools mentioned above). Light carry: Belt knife: As I would dispense with the large (ie heavy) knife, I would opt for something like your choice in the +- 6 in blade length. The Cold Steel SRK (CPM 3V version in sabre grind would be best) is a versatile and proven option. Small Knife: Here I would continue with my choice of decades - Victorinox Swiss Champ! For obvious reasons. Saw: Silky Gomboy. If it was a purely hiking trip, I might consider a Pocketboy instead. Note: I am not very familiar with LT Wright knives, so they did not feature in my choices. They do look like awesome knives. I would like your opinion on my choices and reasoning!

[@jrbarilla]

LT Wrights: Genesis scandi A2 Next Gen flat grind A2 Frontier valley flat grind A2 Overland Machete 1075 Great knives and I use each for a different purpose Survival knives? Multi purpose: William Collins WCSK in Nitro V William Collins WNSK in Nitro V ✌️

[@spider5001]

Great video Jude👍🏻 belt knife, Scandi always🎉 and 3V 💪🏻💪🏻💪🏻 I really want to try AEB-L though. I live on the southern coast so lots of humidity. I’ve had a few LT Wright’s lol. It’s really hard to pin down a favorite. The Lagom was for the longest, then the gen2 NSK, now I’m really liking the GNS

[@SurvivoTek]

Thank you, Joe! I know what you mean. Lately the NSK 2.0 has been my favorite, but before then it was my GNS (that's now yours), Maybe I should get a GNS scandi and see what happens. Haha! If you get the AEB-L, let me know what you think. I've heard great things about it.

[@ashmerch2558]

1 - Gen 6 - Scandi/A2 (big knife for bushcraft & general camp knife) 2 - Genesis - Scandi/AEB-L (Belt knife for bushcraft & wood stuff) 3 - Camp Kitchen Collection ( for the house & Camp kitchen, set includes the 7.5" chef knife in AEB-L, Traveler 5.75" AEB-L, Large & Small pouter's 5" & 3" respectively) 4 - Large Northern Hunter - flat/AEB-L (larger knife for game processing) 5 - JX3 - full flat/A2 (smaller knife for game processing) 6 - Gen 5 - Saber/A2 (General do-all knife, absolutely beautiful Maple Wood Handles) 7 - JX-2 Jessmuk - scandi/3V (Play around knife, I'm very attracted to any knife with lots of sweep and/or belly) 8 - Frontier Trapper - Saber/A2 (Small whittling knife, neck knife & Dark Curly Maple handle) 9 - Overland Machete - flat/1075 (just because) Those are my 9** LT Wright knifes... 9 uses... 12 knives I would really like to get my hands on a LT Wright Ranch Hand for playing around, but 3/16" - 5mm of 3V for wacking around isn't cheap, can't justify $500+ for a knife that I already have so many tools to do the same job that knife would.... I got a Falkniven A1X (Laminated CoS) & a Bark River Bravo 3 (3V)... both are Convex ground and over 1/4" on the spine. Both are around 9/32" or 0.275" on the spine and are more scandivexed ground than full convexed... their my sharpened prybars and are batoning beasts... but not LT's)

[@SurvivoTek]

That sounds like a fantastic collection of LTs! And you've got all your bases covered, which is probably the more important thing. I've been eyeing those Overland Machetes quite a bit lately, but I just can't justify it quite yet. Maybe if I start venturing into thicker undergrowth, I'll have to pick one up as well. Thank you so much for sharing!

[@maxwellmortimermontoure7274]

I needed a sweet little around the yard knife for opening bags of all flock, whittling spoons, and occasional kindling cutting. Went with the next gen, have a feeling I’ll be buying more soon. Between them and bark river I think I’ll go broke.

[@mikefox7947]

Great video man I'm looking to buy one but not sure which one yet I really like the bark River Aurora which model in Lt wrights lineup would you say is similar to the bark River Aurora? Thanks for your time and great video

[@williamprendergast6510]

Excellent video my friend,im thinking of getting the LT.Geneis or the Kephart,now I have very big hands triple X gloves and I have to be sure that the handles on the knives,are not too small.I'm a hunter and camper and I have a collection of Scandinavian knives eg.More,Helle,Martini,Eka.I'll have to get the specs' on the LT.Wright knives.Stay safe.

[@SurvivoTek]

I would recommend making sure whatever you get to make sure there are handle liners. The liners will often add just a little more width. I've started only purchasing knives with liners just because of the handle width.

[@willieboy3011]

Task dictates choice, and no knife can specialize in all tasks. That most relevant point is well made here. My Bark River Kephart stays in the kitchen, as it cuts up all my chickens. You introduced me to LT Wright, so I bought the Genisis for outdoors.

[@SurvivoTek]

Thank you, sir! And I'm so blessed to have been able to share my love for these fine tools with you!

[@eddieescobar4722]

Good job on the vid i want a Lt .., not sure ...,🤔

[@SurvivoTek]

Thank you so much! Just get all of them. Hehe!

[@LaoWaiJac]

Hey man that was a fantastic presentation for knives! Way to go!

[@greekveteran2715]

For hunting convex is the best,flat is camping general utility and foodprep.Saber is for survival knives hard use knives.

[@SurvivoTek]

I appreciate the info. I definitely agree but would add that many grinds have cross-over and can do multiple tasks.

[@dustinewing7974]

I really like their tanto blade in surgical steel, it never needs sharpening!

[@anthonyp7051]

Excellent breakdown Good to see so many of LT’s in hand I own 4 and see no reason to stop buying these high level users Thx for vid

[@Primitivebearknives]

I'd love to do a ltwk sponsored video!!! Awesome guide man!

[@SurvivoTek]

It's an honor to be sponsored by LTWK. Truly a highlight of my KZbin career so far.

[@Primitivebearknives]

@@SurvivoTek I heard that! Maybe one day I'll get there...if not that's ok too! I still love them ltwks!

[@bosse641]

Want several of their knives. But 1st on the wish list is the Genesis. Not sure if I want a saber or a convex grind. Such a nice knife. But very expensive. How do you sharpen your convex knives Jude? Would be nice to see a how-to on that.

[@SurvivoTek]

The Genesis is really a standard as far as bushcraft knives go. They are pretty pricey but it's a "buy once, cry once" situation. Knives Ship Free has great convex grind sharpening tutorials on their website. They recommend using a mouse-pad with different grits of sandpaper and a strop. Out in the field, I don't generally carry a mousepad, but I often have a ceramic rod or something with a rounded edge and a strop just to touch up a convex. To be honest, I'm not the best at sharpening convex's, so when I get good, I'll try to put a video up.

[@steviefowler6382]

I still say the Bushcrafter is their best knife so far... but I’m biased 😂

[@SurvivoTek]

I've never actually tried their Bushcrafter. How does it compare to the Genesis?

[@zayneunderwood1488]

This is a comment added below 👇🏻...

[@Airik1111bibles]

Here is my two cents worth of knife buying wisdom.....STOP BUYING A BUNCH OF LESS EXPENSIVE KNIVES CHASING AFTER THE EXPENSIVE AMAZING ONE. Save up and buy that one knife that will do most task....Lt seems like a good family unit, they all are very nice folks from what I've heard and back up their work. Knife dudes always talk about buying that expensive knife but never do cause "its just to expensive" ....Yet we buy 5 $50 knives each year LOL its more about the rush of a new knife then owning the best one 😂 I own a Mora Garberg and a first edition Gerber LMF2 With the 12C27N steel...Two years ago I had a table full of knives and never bought the knife I really wanted either an LT gns or BattleHorse Feather Stick . I would rather have bought one of those good blades back then but now I just don't care all that much. My Garberg does most of what I need plus I make my own custom knives with Imported scandi blanks, its a blast making your own handle mods and sheaths but I hate leather work LOL😂 Great vid man.

[@SurvivoTek]

Thank you, my friend! And I know exactly what you mean. That was me for the first three years of my entrance into the bushcraft/survival world. Bought a bunch of cheap knives instead of the one expensive knife I knew I wanted. The Garberg, from what I've heard, is a pretty fantastic knife. I can see why you're satisfied with the blades you have. Thanks for sharing the story! I really appreciate it.

[@ronfry5851]

Hey Jude don't take it bad take a good blade and make them glad remember the scandi grind the best put it to the test

[@SurvivoTek]

Hahahahaha! Haven't had that sort of comment before.

[@swtorseneca]

Thanks for this!

[@SurvivoTek]

You're welcome! Thanks for checking it out!

[@NegatveSpace]

There is a million of different options and I've always been confused on what to pick so I've always just gone camping with whatever I had. This detailed video has helped a lot even though I've had to watch it several times Haha. Now finally as soon as I have money I'm exciting I can buy what I need. :)

[@SurvivoTek]

I'm so happy to hear my video helped you out. Did you wind up purchasing an LTWK? And if so, which one did you go with?

[@caseyworthington7092]

Nice video - thx

[@SurvivoTek]

Thanks for checking it out!

[@rolandsilva9743]

On the question why to buy an LT knife here you go He’s been around forever and knows the ropes so he’s not a one hit wonder They really do listen to customers ideas and feedback and most of the knife designs were collaborations The level of professionalism, customer service and attention to detail is amazing. One of the best warranty and customer service departments around. Both him and Bark River are known for their customer service. They are big but not too big. They care and it shows but are big enough to do it all. They collaborate with regular users and also large resellers for designs. They have next to Bark River one of the largest selections of knives around. And everything is hand made not machine ground. You can easily order handle material modifications through them. The wait times for modified knives are really short and there’s a huge selection online. And great deals on used knives on the internet. They go to a ton of shows all over the country so it’s easy to meet and greet the people that make these great knives. They have a huge variety of grinds and steels available. Did I️ mention they are great people too. There’s tons more reasons but one more is LTs words of wisdom posts. That’s a bonus ;-)

[@SurvivoTek]

Couldn't have said it better myself. LT should have this on his website as to why people should buy his knives. Thanks for sharing, brother!

[@rolandsilva9743]

Jude Streicher Outdoors thanks always love your videos. Well done. Inspires me to think outside the box

[@k9razz]

I like a flat grind but most of my camp chores are done with the axe I skin and food prep with either my Case Trapper or Genesis but I definitely use the Genesis to skin deer

[@SurvivoTek]

I've used the Genesis to skin a ram. It worked out great!

[@lionheartoutdoors1316]

I have a Next Gen and an Overland Machete... I was considering the SOSPES after seeing some of your previous videos...

[@SurvivoTek]

Nice! I really like the Overland, but I've never worked with a Next Gen. Do you like it? The Sospes is great if you can carry the weight. I wanted something a little lighter so my pants stopped drooping. Thanks for the comment, my friend.

[@lionheartoutdoors1316]

Jude Streicher Outdoors I’ve used the Next Gen for the past two years, it is an excellent smaller knife to carry that can do a lot. I recommend it as a good companion knife for a bigger blade like the Sospes, or for a primary, if you want to go extra light.

[@lionheartoutdoors1316]

I ended up purchasing a Gary Wines Bushcraft Hunter... I think it’s a great choice if you want to go with something more compact and lighter than the SOSPES.

[@SurvivoTek]

Nice! I'm really enjoying my Gary Wines Hunter. Keep an eye out for an upcoming video where I'll put it to the ultimate test.

[@scottanthony1616]

Hello Jude, new subscriber, thank you for sharing your videos, I have very few knives but want to get a few more, EDC ect,. Have a wonderful week, take care and God bless you and your Family always. 🇺🇸🔥☕️🎄🌬☃👼🏻👼🏻

[@SurvivoTek]

Thank you for the support, my friend! Looking forward to sharing more adventures with you. God bless!

[@rolandsilva9743]

Think I️ have or have had every knife LT has made except the very special hidden woodsman special edition. Had that one on my cart and when I️ went to checkout with PayPal gone. Have had six gns and five genesis. Great knives.

[@SurvivoTek]

They are phenomenal! Oh yeah, you've definitely already beaten my LTWK record, haha! Going to probably Redwall my next Genesis (got to replace the I sold) ;)

[@rolandsilva9743]

Jude Streicher Outdoors love the Larry signature

[@jay-rus4437]

Roland Silva ....same. Great knives. With that said, I actually do not have any of his at the moment. Last year I opted to put mora garberg knives in all of our emergency go bags. Overall they are lighter, all share the same simple sheath, and they can all get the job done.

[@rolandsilva9743]

Justin Russell I️ have a ton of moras and love them. Usually one in my bag

[@garyjacobs2789]

I bought a lt Wright, a great plainsman . Just to see if it was better than blind horse knives . Well let me tell you its about as good as it gets . I couldnt believe the quality improvements ! The little plainsman is in d2 and came like a razor. Great sheath too. Only drawback would be it might be a tad small for the one knife guy . But nessary is the mother of invention. I believe a genesis would be a perfect place to start for an all round knife . The four inch rule came about when your belt knife was used as weapon. Five inch is perfect. On the steels , thats a bad topic. I am tool steel guy . D2 01 a2 and even 1095 are fine with me . Lt Wright has a handle on hard use knives . One problem? I think you might be likely to buy more . 😁

[@SurvivoTek]

I had a great plainsman a while ago and totally agree with your assessment. Amazing little knife, but just a little to small and narrow to work with for long periods of time. The Genesis is like a standard when it comes to bushcraft knives. Almost perfect for anyone who tries one.

[@cobyhowarth4290]

Guys I’m having a inner battle I really like the Garry wines Bush hunter but I also like the GNS I like the GNS because it’s very similar to a woodlore and it’s comes in cpm 3v and I mean the Bush hunter is just soo cool

[@SurvivoTek]

Simple solution = GET BOTH! More complicated solution = they are different blades, so I would figure out which knife fills a hole in your kit best and then save up for the other. Hope that helps (You can never have too many!)

[@dualsportoutdoors]

Very helpful. Made me decide to eventually own them all. I do review knives and I have the Larry Roberts Genesis arriving in my po box tomorrow so if you ever decide to swing by sometime in the future you’ll get to see the Genesis get put to work and maybe even more LT blades as well!

[@SurvivoTek]

Right on! I'm so happy this helps, and I'll check out your vids, my friend!

[@robbabcock_]

The first step it to determine why you should buy an LT Wright. I've never handled one but I've owned hundreds of high quality knives. You should explain why one would buy one to begin with. What differentiates them in a crowded field of great knife makers?

[@SurvivoTek]

That is an excellent point! Thank you for the suggestion. I purchase from LTWK because they have high quality blades that don't break the bank (usually). They have some of the best customer service I've ever experienced. And I'm a fan of a lot of their knife designs. The Genesis and GNS (two of their more popular knives) are on my top knives list consistently. That being said, I haven't tried a ton of other knife makers, so I don't have enough experience to say much past my own personal preference. I've been working with them for a few years, and I've never been disappointed, so it's my comfort zone.

[@scotthill6807]

I only have 3 LT Wrights, the GNS, Great Plainsman and the Bushcrafter HC. Everyone of them is a great knife. I just wanted to say the 1075 used in the Bushcrafter HC seems to be more like 1095 to me. I'm guessing, but I think LT's heat treat brings out the best in this lower cost steel. So don't think it's some questionable steel, I promise you it's not based on my experience. Thanks for the video Jude.

[@SurvivoTek]

Heat treat is some kind of magic imparted in a blade. LT uses Peter's Heat Treat which makes theirs more specific and consistent. It can make an O1 act like a super steel or a 1075 work like a 1095, I'm sure. Thanks for checking out the video and the comment, my friend. Keep collecting those LTs, they're amazing!

[@Baruch-Hashem]

Choosing a grind for me is based on my options for sharpening. Will a have a diamond stone or workshop, or only a stone I find by the creek and my belt. Scandi is the easiest to sharpen on any stone for a beginner, just lay the gring flat to the stone, but other grinds like a convex are better for splitting wood and less prone to chip. Same witha recurve, better for cutting through a rope or hide, but sharpening requires more skill, and a chip is more difficult to grind away while keeping the profile close. Very complex topic, but great video and LT Wright makes great knives. Beyond steel what about heat treatment, what about differential heat treatment, or air cooled steel vs oil. Such a comples topic it will leave a buyers head spinning.

[@SurvivoTek]

That's a really good point. Being able to sharpen your blade is necessary. No use having a knife if you can't get it sharp. Sharpening tools/skills also play a role in which steel should be chosen. If you can't sharpen a "super steel" don't get one. I would love to make a longer more thorough blade buying guide that covers more of this topic since it's so complex and can definitely be confusing. Thanks for the comment, my friend.

[@ramonrodriguez5728]

I got 4 LT Wright knives. GNS(saber grind), large northern hunter, bushcrafter, genesis(flat grind).

[@SurvivoTek]

That is nearly a perfect setup you've got there. All four of those are awesome blades!

[@bcb2585]

I just placed an order for the Rogue River 3V Scandi from L.T. Wright. I have high hopes! Great video.

[@SurvivoTek]

That's awesome! So happy for your recent purchase. I don't think you'll be disappointed.

[@JACKBLACKTOSE]

Really liked your discussion on steels, grinds, etc.! I discovered LT Wright a year ago and picked up a Camp Muk, Maverick Scout and scandi Woodland Pro. The Woodland Pro was that knife that just made me stop thinking about purchasing other knives. It’s my go to for camping, hunting, and just putzing around the backyard. For me, it’s the perfect balance of handle size/blade geometry. I also learned to sharpen free hand on a Mora and still find it less taxing to touch up a scandi edge over a convex/v-edge. Call me lazy 🤷‍♂️

[@SurvivoTek]

That is so great! Those three knives are ones I've never gotten a chance to work with. Funny just how many designs LT has out there. I don't think it's lazy to get the job done and keep on working in the woods.

[@FrankChristopherOutdoors]

Great video man! Very fun video for me to watch and I do think I would like to buy an LTW knife in the future someday

[@SurvivoTek]

Thank you so much. Definitely start saving for an LTWK. They're great! (I feel like Tony the Tiger anytime I type that)

[@FrankChristopherOutdoors]

Jude Streicher Outdoors hahaha 😂

[@michaelholian1951]

I like the GNS scandi in O1 steel. For me it's a great handle and fantastic blade. I add oil after every use.

[@SurvivoTek]

Awesome! I have one too but in saber grind. It's been a solid companion over the years for sure!

[@jeanpierreantoine6357]

Merci à vous pour toutes ces explications très intéressantes et d'avoir présenté quelques modèles de couteaux pour le bushcraft.

[@SurvivoTek]

You're welcome!

[@aymanjoudar5425]

St.Jude, this is very sensible video, I know ibwoukd find something that makes sense...most Bushcrafters are focusing on hiw knife works outside what knives shoukd work, but really knoves are of limited use and it is a small piece out of many for real bush crafters, I am trying to learn bushcrafting myself, and actually most bushcrafters equate that w making fire whichbis still a small, but essential, part of the trade...thanks ST. JUDE

[@SurvivoTek]

Thank you! And I totally agree with your opinion on knives. Many people focus so much on the knife as a tool, but I use my saw and hatchet far more when practicing bushcraft than I do my knife. I mainly use knives to test and film. Firecraft is an important skill, but when it comes to bushcraft, knot tying skills are more beneficial to shelter craft and plant identification is one of the important self reliance skills. I've been studying both quite a bit lately.

[@aymanjoudar5425]

@@SurvivoTek Plant and animal identificatio are extrememly important they are in my head, I have started looking around for material and books for that. I need to devise a plan to learn, practice and share info w others. I will look for couple guys in my are may be we can learn tigether and share experience. First aid, is a must for sure. Stayong in shape is a must. I also practice fasting faus here and there to learn patience and strenght..we will see...changing fro corporate to active lige styke not easy but achievable...

[@a.delome8023]

Been looking to get my first LT Wright for some time now and thought I had it finally narrowed down to the 3V Sabre Grind "Outback", but now you threw a wrench in that with a few different perspectives on a couple of your favorites and suggestions. Ahhh but these are happy conundrums... Great video. Look forward to some of your others.

[@SurvivoTek]

Haha! Sorry about that. Hope you found one you're happy with.

[@jon-eriksuermann9844]

I went with the camp muk. I live in the city, so no bushcrafting and whatnot for me. The nessmuk style blade is great for food prep when I’m grilling, cooking dinner, and making my daughters school lunch without having to worry about stuff getting into a pivot of a folder. The size is perfect to carry in pocket because I don’t wear a belt all the time.

[@SurvivoTek]

That sounds like the perfect choice! I've been wanting to check out one of those for a long time! How does it fit in the hand?

[@jon-eriksuermann9844]

@@SurvivoTek it feels awesome! The day it came in I “processed” and onion, apple and watermelon. A little fat compared to my Bark river JX6 to carry in pocket, but It’s works. I had it on the belt today and it was comfortable. I am very happy with my purchase.

[@BearHartOutdoorsChannel]

My favorite is still the Genesis in scandi but I have many more to try to make a more educated choice!

[@SurvivoTek]

Nice! The Genesis is so great. Have you every tried a GNS in scandi? I like the blade profile a little better than the Genesis's.

[@sgt.grantham6815]

I purchased the next gen. I LOVE THE SIZE. NEXT I WANT THE SHEATH WITH THE FIRE STEEL LOOP.

[@SurvivoTek]

I've heard great things about the Next Gen. Really hope to check it out one day.

[@rangerjonoutdoors6429]

Great vid brother. Great music. Love LT.

[@SurvivoTek]

Thank you, Ranger Jon!

[@ffoxyff]

Great video. Camp MUK flat grind G10

[@SurvivoTek]

Awesome! I really like the look of the Camp Muk.

[@sunnyrachelsson3169]

I just got a genesis flat grind in 3v and it's sweet knife

[@SurvivoTek]

Awesome!! Congrats, my friend!

[@davefarnsworth3020]

Just renew your house mortgage and buy two of each. I will be buying at least one soon. Probably gns 3v saber.

[@SurvivoTek]

Hahaha! Too true! I'd love to pick up a GNS 3V saber! Seems like an ideal all around knife.

[@davefarnsworth3020]

@@SurvivoTek I bought one. Has double red micarta, mat finish. I was surprised that it wasn't quite shaving sharp but it didn't take long for me to get a scary edge on it. I already had experience working with 3V so I knew to be firm with it. Now I can't seem to put it down. Dressed out a dry salami and cheese. Feather sticks and works wood well. I believe it'll make good all around knife.

[@Relic67]

Very well produced video. Thank you.

[@SurvivoTek]

Thank you very much! I really enjoyed putting this one together, and it means so much that you enjoyed it!

[@zeqillanes4312]

I would like this video done with condor knives.

[@SurvivoTek]

That is a great idea! Maybe I can contact Condor and see if they'd be up for it.

[@dumaflotchy13]

As always ... great reviews/videos. Very practical & informative.

[@SurvivoTek]

Thank you! I spent extra time to get this one right.

[@dumaflotchy13]

Keep it up ...!

[@slkknifelover]

I own 4....i love them! I plan to get more!!!!

[@SurvivoTek]

That's awesome! I think I've owned like 8 or 9 at one time. Haha!

[@danbolton3180]

I will watch this video again, and again to refine my decision, and while saving up.

[@SurvivoTek]

Thank you so much! I had a blast putting this together. Please enjoy as many times as you need.

[@danbolton3180]

I live in a marine and rain forest environment. I do have the Patriot in A2 steel, I believe. I have the GNS also in steel, and am waiting for a small northern hunter in stainless. Beautiful knives! The Patriot slips nicely in my pocket and is easily sharpened.

[@cocovasquez1]

Genesis Scandi is my go too in A2

[@SurvivoTek]

The Genesis is pretty much a standard in bushcraft. I love mine too!

[@tomsmyth5138]

How much did they pay you for this!!!

[@SurvivoTek]

Haha! I can't share my sponsorship details, but to be honest, I would have made this video eventually with or without the sponsorship. I love their knives and their company. The sponsorship is just a bonus.

[@asfawr1699]

4 knives a year is nearly not a lot,lol

[@SurvivoTek]

Hahaha! Can I quote you on that when I'm trying to talk my wife into another purchase?

[@michaeldeiters2723]

Great vid, but I’m not a fan of background music in a review , it’s distracting but that’s just me, take care

[@SurvivoTek]

Thank you for the input. It's a tough decision whether or not to add music. Some people love it, others not so much. I do want to make "adventure-type" vids without music in the future, but I need to find the time.

[@jeff6989]

ltw knives uses cnc knife blanks that are sent out to be heat treated.He just adds a handle. His knives cost way too much! Save your self a lot of money and buy a mora.

[@SurvivoTek]

I own several Moras, but I still choose to spend my money on LTWK. Many large knife company CNC blanks. If companies didn't, they'd have to charge even more for a hand-crafted knife. When it comes to LTWK, you're paying for craftsmanship, superior materials, heat treat, and customer service.

[@bushtrash2286]

I think I'm going for the V3

[@SurvivoTek]

Do you mean CPM 3V as a steel? Or a version 3 of something?

[@bushtrash2286]

@@SurvivoTek Yes the v3 metal, it seems better tolerant to rust than regular 1095.

[@bushtrash2286]

@@SurvivoTek Great video btw thanks for the upload, helped me a lot.

[@dumaflotchy13]

Excellent...

[@SurvivoTek]

Thank you!

[@KnifeCrazzzzy]

Excellently done!!!

[@travis2595]

Nice job with a short video that gets to the point and explains the basics, after that it comes down to experience and then preference.

[@SurvivoTek]

Thank you so much! Yes! I love helping people get the ball rolling in finding the right knife. I'm beginning to work up a "knives 101" series or something like that to go even deeper into the discussion.

[@davidrogers182]

Nice Review

[@SurvivoTek]

Thank you!

[@davezito888]

Well Done!!!

[@SurvivoTek]

Thank you, sir!

[@spider5001]

One more comment lol. My first “expensive “ knife was an LT Wright Genesis. I think that with this knife you can’t go wrong. The handle is universal. If your jumping in the genesis is a safe choice for knowing that it’s going to work for you👍🏻👍🏻👍🏻 the handle..... the handle..........

[@SurvivoTek]

The handle. Yes. The all-important handle. So many people look too much at the blade, the grind, and steel, but it's really the handle that should be our first concern. Thanks, brother, for adding that.

[@rhinooningo2865]

I just found your channel when this video appeared in my recommendations. Very professional work on the video in terms of production quality! You provided a good primer for helping a new buyer select their first LT Wright (I say first because we all know what happens after that . . .). If someone wants it "simpler," I think they can't go wrong with a Genesis, CPM 3V, flat or saber grind for all purpose use.

[@SurvivoTek]

Thank you, and I appreciate you checking out my channel. I agree, the Genesis is pretty much one of the best all around knives on the market.