LT1 powered Third Gen Camaro!

[@joshender9606]

Love the LT1 focused content, keep it up! 👍

[@strongspeedworks]

Thanks, will do!

[@Jpilgrim30]

I love the shift ball that MGW sells with their short throw shifters. It’s the perfect size.

[@jasonclancy6650]

i have seen the shaft of the throttle body move (cause sticking issues ) on bbk and my Holley 58 mm . i drill and pined the shaft and linkage

[@wilcox9128]

can you get any extra performance out of a stock lt1 95 z28

[@strongspeedworks]

Yea

[@MrYz250fman]

Cool video

[@strongspeedworks]

Thanks!

[@maxxproductions7749]

What injectors would you recommend for a cammed LT1?

[@strongspeedworks]

32-36lb from a reputable company

[@BrockwRock]

What city are you working out of?? Wondering how you are from Vegas.

[@strongspeedworks]

Tulsa.

[@BrockwRock]

@@strongspeedworks Nice. I got a brother in OKC. Buying a 94 Firehawk and I’m sure I’ll need tuning as I get her sorted. Loving the LT1 content. Thanks!

[@Aqua350Lt1]

How would it have the opti spark but not use the optical sensor, is that better for high rpm?

[@strongspeedworks]

It utilizes the factory 96/97 crank sensor for its trigger.

[@adamlegatt37]

Do you remote tune 4x swaps? Looking for tune help with one of my lt1 cars.

[@strongspeedworks]

Yes. My email is [e-mail] Shoot me a message

[@adamlegatt37]

Will do man thank you!

[@ericklang9132]

Hi my name is Eric and watch all yiur vids. I have a 94 6 speed Corvette and was wondering what in order would be my best bamg for the buck at home upgrades i could do? The car is a 55,000 mile un molested , polo green and really love it but want to make some improvements and you as far as i know along with Ellwein and Rippie are the most knowledgeable, if i were closer id bring it to you but am in Minnesota. Would love to hear what youd do on lets say less than 2000$ budget. Thanks much and ill keep watching the channel

[@strongspeedworks]

Heads, cam, injectors & tune. There’s your budget Gain 80-120whp

[@ericklang9132]

Thanks, kind of what I was thinking. Does a 160 thermostat everyone talks about a good little mod? Would the fuel pump need an upgrade with the heads, cam, injectors?

[@mikes.1882]

An ly6 6.0 and a TKX 5spd. Cam and springs. Everybody that loves their lt1 goes to bed wanting an ls motor. But let's do the math Lt1 price list Cam and lifters $850 3 3/4 in forged crank $850 Forged pistons $850 + Rings bearings and gaskets $$$ Heads that do work $2500 Replace the opticrap $2500 Drop out ly6 $2500 Tremec TKX complete kit $5000 Cam 179 bucks, no shit

[@matthewmineo5393]

Wheres the best place to get the 4x pinouts?

[@strongspeedworks]

lookaside.fbsbx.com/file/LT1-96-97-4X-Pinout.pdf?token=AWz697M1HsQAsRcDBBtVqms8xOjhPN1wQV8ee3vKkboHmCHkkv44tPbF9KPclNHQjkHzfDZtAGRlKD6-z4FX2ZUvHoXoK0S9fS6hu9K8SU_rKt5eskAhT9GFT-lOhTsXM8bYTX8hzW0s9m0qscxjaJTqSGKnl0uAVZRQu8xHZsvbF22m42tXA895OOCXNl5pNkBjVos4XmGA6nTbRgIA9-BZEfOShUSuYunqeNyP49QetWngPK8JrI8--qeSkn6ag0Z3XOeR4DqpffMZ6dNId1f6Fzu2DA05_cSkBIcG-71EHkxM03klSRAOGux_VrVqwTK1GV9JoiRa2l_nGJAXHJwB

[@matthewmineo5393]

@@strongspeedworks thanks so much! I'll be in touch soon for a tune after I do this!

[@anthonylaudano9435]

​@@strongspeedworksI LOVE MY 92 ANIVERSREY CAMARO Z28 THAT I ORDERED NEW BACK IN 92 AND JUST 19 THOUSAND ORIGINAL MILES LATER I STILL HAVE OWN IT AND I PLAN ON NEVER SELLING IT.

[@anthonylaudano9435]

​@strongspeedworks IAM DEFINITELY LEAVING MY 92 Z28 ORIGINAL BUT I PLAN ON BUYING ANOTHER Z28 EITHER A 91 OR 92 Z28 THAT I PLAN ON MODIFY TO MAKE IT REALLY FAST.

[@nathancurtis8324]

Sorry about the seats.. lmao I sold those to him.

[@strongspeedworks]

They were actually fine! Just a pain in the ass to get in and out of lol

[@clifford_2zero7]

My BBK alway stuck since 2011 when i got it but it wasnt TOO bad just FBO. Then when i did LE HCI and 24x (EFICONNECTIONS) Etc. It got REALLY bad while we where in middle of tuning my car. Thing started getting stuck at like 30-50% or so. Made me look like a real jackass that last day at the gas station 😂 that was the final straw. AS&M was thankfully on its way by then. It still doesnt settle down instantaneously like id prefer it too, but its so much better and it does zero out. I cannot recommend BBK tb for these engines unless just FBO and even at that point why bother until HCI or around 400WHP or so. Only reason why i had it at FBO was because i knew id go further with the car and its such an easy install. Unless you get it cheap used to test out id only reccomend a quality TB like the as&m unit. Also brandon FWIW with my BBK prior to it getting really bad every time it got stuck id just have to "blip" the throttle and it would settle down.

[@imurkoppz2464]

My dad has a 95 z28 and is letting me have it , but I have to get a new body I wanna get a 3rd gen body

[@dresanti5274]

💪🏿