1982 Hydraulic Elevator - engine and shaft view

Hydarulic elevator built in 1982 by Heinzerling / Siegen - capacity 450kg
shaft view - motor room view

[@danielrichardbond]

Nice video, thanks for posting!

[@alexcaracal1017]

I was so happy to see my first hydraulic elevator motor, it was the best day of my life

[@caroleast9636]

They’re quite boring things to watch, even when they’re running.

[@Swissvator]

Nice Bauer elevator, good Video

[@neaelevator]

Awesome video!

[@luckybulb]

N.E.A. Elevators Thanks ;)

[@DieselDucy]

nice elevator!

[@luckybulb]

Thanks :)

[@user-vy9ib8zg8g]

DieselDucy емвпеев

[@johncotter8886]

@@luckybulb j H Nnm/m Mm/m 25j f it'ssc h it's i n bvhAAbvhAA

[@sussyballs1819]

@@johncotter8886 ñ

[@user-kr4bf5cf6l]

@@user-vy9ib8zg8g тгр

[@thelovelyratkitten]

Thank you so much for sharing. I really appreciate this comprehensive look inside. :-D

[@bayanmatar6355]

3

[@CRAZYI1820]

Bila

[@njenterprises9151]

Nice video

[@dngunder]

Not many machine rooms have a hole in it:) Good vid!

[@garydonaldson6580]

The first

[@Renatodonadio]

How do you route out ropes in conventional machine rooms? ;-D

[@danman132x]

Awesome video. Been trying to see how the hydraulic elevators work vs rope

[@luckybulb]

+Daniel Rivera Much Thanks :)

[@tonybaines3332]

most hydraulic lifts have ropes, you can use a smaller ram 2 to 1

[@fvelez03]

Daniel Rive

[@supereli4695]

Tony Baines

[@NM_Tech]

What kind of liquid does a hydraulic elevator use? Also if an elevator had a rope, what would be the ropes purpose?

[@muddysledge]

Great video. I was surprised to see the rams are on the sides. Makes sense, I guess I just assumed it would be in the center.

[@ashwantnaidu9888]

It's just like lifting weights with your muscle power (manpower) 💪

[@bubakkarbarry3019]

I watch this video in a long time

[@robertkubalski190]

Wow good chanel

[@asepheriheri713]

vielen Dank.

[@ag6371]

Is the controller relay logic?

[@taymuramer9493]

Cool

[@denveradams2280]

Looks like a pumping unit for a limited use limited access elevator max speed 30 fpm and that flexible hose to replaced or pressure tested every 6 years unless there is an over speed valve.

[@kurtzimmerman1637]

That's got better hoistway lighting than anything in the metro st. Louis mo. Area. I'm lucky if the cartop light is bright.

[@lou4781]

Didn't realize hydraulic elevators were so slow. Cable ones are a way better design. Counterweights make all the difference.

[@JulienOBER]

Tom Smith and noizy!!

[@sheldonhall7309]

Cable elevators are also significantly more expensive.

[@MishaGianoli19]

very nice interesting video

[@luckybulb]

Thanks :)

[@qeelevators2960]

OHH NO ITS MODERNIZED!

[@Seppen552]

R.I.P.

[@francobobfred]

I dont understand how that little motor box can lift such an immense elevator car

[@bachtaaukro2817]

+francobobfred the same, like you are able to lift a 2ton car just with your hands and a small hydraulic hoist

[@atomstarfireproductions8695]

That's why hydraulics are used! They are great for high torque applications.

[@heliostransport515]

I Always find hydraulic elevators interesting..

[@MrEngineer20051]

I always find you interesting...

[@Simos805]

Can anyone explain what part of the hydraulic system makes that loud hissing sound when the elevator is about to stop or when it is going down? Our elevator does the same exact sounds and I always wondering!

[@QEElevators]

It's the valve slowing the flow of the oil and when going down it uses gravity so it's the sound of oil rushing into the tank

[@Simos805]

@@QEElevators And how they managed to make it silent in newer machines?

[@QEElevators]

@@Simos805 Most new ones aren't, I've never seen a silent new one it might be the type of piping

[@seanjuth]

​@@Simos805engineering has progressed significantly over the years. Laminar flow with bigger hydraulic lines sometimes has something to do with it. Also mufflers as well as oil properties such as viscosity and also what the oil itself is actually made out of, are also factors

[@MasenMonster]

0:06 Video starts.

[@qeelevators2960]

I bet that cut at the beginning was the kid saying why does it smell like hydro fluid?

[@MrEngineer20051]

I bet you have been commenting too much.

[@TheTheo58]

Interesting hydraulic hole-less elevator, I've seen an elevator similar to this one expect roped. Never seen a power unit like this one, I'm assuming the valve are top of the housing with a submerged pump in the oil tank. Runs on 3 phase power? 230,440 or more.

[@costasgavalas]

This is an ALGI elevator, with telescopic cylinder.

[@luckybulb]

It runs on 3 phase power, 400V ;)

[@caroleast9636]

5:30 It May seem strange but the pump motor is usually submerged in the oil with the operating valves on top of the tank. It’s common these days to have the hydraulic cylinder in the side of the shaft, and often with a rope connection to the car. That saves having a deep bore hole underneath to accommodate it. There’s lots of problems creating that borehole in a crowded town or city.

[@seanjuth]

400v 3P at 50 Hertz. Probably at least 30 hp

[@qeelevators2960]

Seems a bit low on oil

[@bubakkarbarry3019]

In 2018

[@justinjohnson1015]

That is cool

[@markkomannik7547]

😎Like

[@WaseemEngineering1122]

Hi

[@qeelevators2960]

Is it low on oil?

[@MrEngineer20051]

No. You have been commenting on this video WAY too much.

[@alexcaracal1017]

Once at a hotel the people who worked at the hotel or it was the manager who let me do it and for the first time I saw that elevator motor

[@linnemanntim1502]

Frau Dr. med. Doris Ecker-Lueg Rathausstraße 5, 57234 Wilnsdorf 02739 2989 maps.app.goo.gl/avtkr9RSKXJLns2v6

[@thestrixx4828]

Cómo tienes el niño llaves de eso

[@tyelowe4663]

F-sharp pitched motor

[@coondogtheman]

How far is the car from that hole in the motor room?

[@TheMatsushitaMan]

2:40 pump turns on

[@linnemanntim1502]

2:38 4:06 get es an

[@snakey5417]

How did you get back there and will you bring ma with you plzz

[@user-ni8lf9kh3c]

i have a hydraylic elevator who is modernized by emgi lift AE

[@TechnoLifts]

this Elevator is in Germany ?

[@luckybulb]

This is in Germany, near Siegen town ;)

[@vincentcrosby5247]

No toe guard?

[@andrewsstation6436]

How do you unlock the hoistway doors from inside the shaft?

[@luckybulb]

kzbin.info/www/bejne/a5KWe5-rjruXpK8

[@MrEngineer20051]

So you don't have to watch the video Lucky Bulb replied to you, I will explain it for you. On the side of the door frame in the shaft, there is a lever with a wheel on the end. If you push on that, the door unlocks, and you can open it. On the side of the Elevator cab, there is a bar that pops in and out that pushed on that lever.

[@andrewsstation6436]

Samuel Schneider Thank you very much.

[@andrewsstation6436]

Lucky Bulb Thank you for that video.

[@ag6371]

@@MrEngineer20051 That moving part is the retiring cam

[@robertkubalski190]

1:09 oh my ears 🤕

[@douro20]

Only 20 bar.

[@martijnadriaensen8835]

hallo

[@robertbarac2292]

wery nice elevator

[@pietro6786]

Allo

[@user.9999matrix]

it gives me nightmare

[@bharatiramchiary6960]

Big room small motor bruh

[@asepheriheri713]

the Elektric Motor inside the oil tank..normali 3 to 5 HP elektric Motor.

[@kargaroc386]

So I guess it's just a box mounted on what's basically an electric jack. Rather interesting. This one has internal doors which is odd for these kinds of elevators, but the fact that the outer doors swing open is already bizarre and foreign for Americans like myself.

[@eminedemir6856]

kargaroc386 c vkcb

[@williamsr06]

Hole-less Hydro

[@alexcaracal1017]

It was a bigger hydraulic elevator motor than this one, the one I got to see was bigger!

[@dawooddawood4920]

Too dangerous for a simple show

[@danaandelova1193]

Andelo

[@user-yo3ou8ot5y]

K E 1 2

[@yigitegekartas2054]

'

[@enriquecantaboleros724]

PSI Todo de oddxll!!de FX dos dm

[@MauricinFPV05]

All I hear nheeeeeeeeeeeeeeeeeeeeeeeeeeeeee weeeeeeeeeeeeeeeeeeeeeee rrrrrssssssssssssss

[@dentaladvice9955]

hidrolic bad

[@bienbay3434]

I DO NOT LIKE IT

[@dngunder]

Not many machine rooms have a hole in it:) Good vid!