Best CNC Router Machine for Beginners in 2024 | Top 5 | Cut/Engraving

[@jessethompson9344]

WARNING!!! If you are a beginner, do not go with the Genmitsu (Sainsmart) machine. They don’t have ANY customer support, and they don’t play nice with third party CAM softwares (easel, vcarve, etc…) it’s a sturdy machine, but basically a $2,000 paperweight in my shop.

[@waltertrejo2534]

Thanks for letting us know! 😃

Why did you not recommend the best on on he market---the Scienci Longmill!!!???

[@Play4Vida]

What's a better option?

[@ellepap2126]

Thank you, I going to go with that one. Any recommendations for the best to carve stone with like marble opal and quartz

[@timvangenechten5258]

Not planning on buying one soon, but you made the best video explaining cnc's and recommending some with good reasoning. Very well done.

[@jimabromaitis3473]

Great video. I learned more in 15 minutes than all morning looking at everything else. Thank you, Sir!

[@kevinthomas3341]

Great video!! I've just bought a v1 Proverxl 4030 which I use with Carveco Maker and UGS. I can confirm that it is a tank destroyer🙂.

[@DMCArt1959]

First off, you didn't bore me to teary sleep. Good info. I have a genmitsu 3018 . My learning curve for today's tech is slow, and I believe you do me fine while not losing the more adept watcher.

[@UniversalGamer647]

i like how you gave suggestions for many cnc routers including starting out to more advanced and all the goodies that come along with each one. Great job on the video

[@StewCochran]

I wish I watched your video yesterday before I rushed to buy one. I bought a Dobtian 4540 . At least it's got a 500w spindle. But took little notice of the power of the stepper motors and doesn't look as solid as a couple you recommend. Hope I haven't wasted $800🤞. A very informative video. Thank you.

[@petermarin]

This is great!! What would be really useful is to also describe the other things you need to go with the CNC (which bits, what ventilation/ enclosure, laser, other attachments,etc) - I’m new, I want a full kit, and I’m happy to use your affiliate links. I suspect many would too.

[@LuigisProductReviews]

Hey Petermarin, Thanks for your feedback. Hopefully in the future I will be making videos related to cnc Add ons. :)

[@natshareef988]

N00❤😅

[@mikec.8768]

Excellent intro to CNC for anyone thinking about getting a machine. Thanks for a well reasoned and organized video!

[@richardfarwell6759]

@8:19 Servo motors are completely different than Stepper motors. You would need different electronics to run them. Bits are called "endmills", "V-bits", "engraving bits" "ball nose endmills", etc. "Drill bits" are for drilling; as in a drill press or hand drill; they are not for use in a CNC.

[@TheTubejunky]

This should be pinned.

[@mattwimberley8015]

Thank you! If I had seen this video last week I wouldn't be waiting how ever long for the Vevor S4040 to get back to amzon. I will be getting the Genmitsu for sure. I will be looking at your videos for help from now own.

[@BendSpeirs]

This is exactly the review and information that I was looking for. Thanks!

[@SugoiCCStore]

Hi Luigi, I have a laser machine and my dad wants a CNC and I didn't know which one. The MYSWEETY 3020 PLUS It's on sale. Thank you very much 🙏🏻

[@jay2wip]

Wow! This video is perfect, so detailed! I do now have a better understanding of what machine to pick. Thank you!

[@babbagebrassworks4278]

I got the cheapest 3018 with the 2.5W for

[@LuigisProductReviews]

Hey babbagebrassworks. I really appreciate you sharing your experience, and I'm sure every else does too.

[@LuigisProductReviews]

Hey everyone :), Hope the video helped you out. If you have any questions, I'll try my best to answer them👍 You're Awesome!

[@paulahre382]

Great video, thank you Luigis. Are any of these machines running closed loop?

[@virtualjournal-q1b]

Hi Luigi, this is such a helpful video for a complete novice. Your video was thorough and simple to follow. I do hv a ? for you. If I want to engrave on pebbles and rocks from the beach, is # 3 or # 5 better? Or do u hv another suggestion?

[@1lifelive570]

Hello, on your links for router extension (upgrade) did you mean to pick the DeWalt (cordless battery operated model) to add as a router? I would think for sure you would have picked the corded model? Or am I misunderstanding. Thanks for the excellent video!

[@Null-Red-Blue]

Hey Luigi, do you have an opinion on the XL version of your favorite recommendation? Are there any drawbacks? Great video, I wish more review videos were as insightful and in depth as these with awesome metaphors to explain how they work.

[@CochronHistory]

Thank you. Thank you. Thank you. I’m a rock and you’re a great teacher hands down. 7th vid in one hour. So getting one

[@Monkey_Snot]

What I'd like to know is, if I buy the Genmitsu and want the Makita router instead, do I need a different spindle holder for the Makita or will the original holder allow it to fit the Makita?

[@SuperChetR]

Thank you. This is a great video. I have a Q. If I buy the cheapest one, can I use Carbide Create and will the software detect the CNC and cut how I want it

[@billieb]

I stopped at 1:30 second just to say I love your visuals and theatrics!!

[@Dadster171957]

I am just getting into CNC, so thank you, great video!😊

[@mazenaslam6889]

Bro your Channel needs more recognition..

[@LuigisProductReviews]

Thanks my friend :)

[@silverbackag9790]

Why? He’s never touched any of these. 100% stock, manufacturer’s, and borrowed footage.

[@themanwithtwoeyes]

Yeah bro, his gestures & graphics are dope af

[@JS-gh5gm]

Agreed. Like the presentation.

[@Thelatinoconservativeview]

First time here and I agree. I liked and subscribed

[@kendrac.4120]

Awesome video. Which one would you recommend for making wax seal brass stamps?

[@hazarasp]

Awesome video. Lots of information in 15 minutes. I just ordered Genmitsu "PROVerXL 6050 Plus" as a birthday gift for myself :)

[@nene1092]

Hey my friend congratulations amazing video. I have a question I wanna to engraving a jewellery (sterling silver, gold plated or steel with gold plated) for example image or words. Which machine do you recommend? Thanks!

[@TheCastaz]

First of all thanks for the great content! Could you recommend where to source s4s or s3s wood panels suitable for cnc?

[@Lasta_92]

Can You please suggest which one you would recommend for small stone engraving jewelry pieces? BDW great explanation and channel✊🏻

[@WLDORPFELD]

These are fine, but if you're interested in something more serious, the machine I recommend the Onefinity series of CNC Routers or the StepCraft. The Onefinity is the most robust desktop out there. Although you can't install a tool changer. Something I found myself wanting almost immediately. The StepCraft offers a tool changer and is the most versatile machine in the desktop market. To avoid putting good money after bad, spend a little more now. I regularly cut 6061 .188" aluminum on my Onefinity with a 2.2KW CNC Water water-cooled spindle, lubricating with Tap Magic applied with an airbrush. MIRROR FINISHED EDGES.

[@ashrafabbastawfik]

I need your advise for a cnc machine for which I can add a rotary module to be able to make small wooden figurines ?

[@mrbob92679]

Just found your video. Great comparisons. Was looking into MPCNC but after seeing this i might want to just buy one. Just subscribed too so i can see more of your videos . Thanks for sharing

[@karloleksic2646]

Hey, great video! What is the difference between MYSWEETY, Genmitsu, and other no-name 3020 CNCs? I would like to buy something like MYSWEETY 3020 Plus but I am very confused. Also can't find any official documentation.

[@Natalie-fu9xv]

You helped me so much thank you for taking the time to do this!

[@ashrafabbastawfik]

thank you

[@erialettchill]

Wow I really appreciate your video and effort

[@lifepointswithronda2968]

This was a phenomenal video and really detailed thank you so very much 🙏🏽 💖

[@the_edge_of_time]

Very well done video. I enjoyed it greatly. Unfortunately or in my case fortunately I purchased the 4030. One big problem I am trying to overcome is finding the collet (65mm) for it and the Makita router. It does come with a 69mm for a Dewalt router. Still nice vide.

[@dayworks9100]

Thanks very much - a very well put together primer on CNCs

[@ChristianNasulea]

Which CNC would you recommend for a beginner who wants to learn about milling with bits and engraving with lasers without having to buy two separate machines?

[@KostisAsikelis]

Amazing video! I want to ask you can i cut acetate plates for eyeglasses with this these little cnc machines ?

[@WalterZimnyckyj]

Helped me with making my choice, thanks heaps🙏

[@agetherge]

Does the Genmitsu CNC Router Machine PROVerXL 4030 come with an engraving adapter. Or is there an add on for it

[@wp4ldu]

Great Video🎉!! Also, between the Mysweety 3020 and 4540 bigger size. Which’s do you recommend? Any difference? Henry

[@LuigisProductReviews]

Hey wp4ldu, The main difference between the two is Size. Otherwise, both have very similar capabilities. So its up to you if you want to pay a little more for the extra size or not.

[@blackfirst1691]

dude, you were made to do these videos, pure excellence

[@brianmaag178]

The MySweety one - can you tell me if that CNC accepts 1/4 inch bits, or can it only take 1/8 inch bits?

[@xiaoshizi131]

Nice. Just missing the ATC option😉 Any link to get an ATC for a 3018? Thx

[@Finthefish-hr8ky]

What's better for eva foam? CNC or Laser cutters?

[@RandyZimmerman-pp5wj]

Common sense no loud music and you treat everyone with respect kudos

[@aslater81]

How do Maker Store CNC Machines compare to these? Or Bulkman 3D?

[@jamgill9054]

A truly great job on this video!

[@clarkriccobuono3903]

Great information, thank you

[@ptxarptxarov3830]

It will be great if you make a video explaining more in dept every part of the machine and of course the possible upgrades you can make to this kind of machine.

[@EvansAmahwa-ri6ik]

Very informative, how much is the Genmitsu CNC machine and what improvement/upgradings should be done on the spindle, lastly can you advise on which laser machine one can begin with as a beginner, am interested,

[@aslanlibzo459]

Great Video man! Thanks a lot, everything feels clear now.

[@gamithaa]

tks a lot it help lot to understand CNC tks lot

[@sachzach8605]

Luigi's Product Reviews Hi. Thank you for this site, it’s great. I need help. I want to buy a beginner CNC for stone (marble and gratin). It’s for a job that requires a lot of precision. What machine do you advise?

[@wnajd1]

thank you for teh great explanations

[@dwayned1638]

🥲 Thank you! Outstanding descriptions 🙌🏾🙌🏾🙌🏾

[@HowardBernard-q7r]

Yes, how much is number one, machine,,as a beginner a very interested,,you have done a great job showing us the pro a cons...

[@undoubtedcrow8010]

$150 on Amazon

[@FlyKool1976]

I'm just learning of these CNC machines. I have a business that involves cutting 4 inch circles and 480mmX120mm rectangular holes in 55qt coolers. Can you tell me what machine might be best for me?

[@aslater81]

Maker Store CNC

[@Danny12.20]

Thank u sm. I found this very helpful.

[@peteranon8455]

CNC reviews are great.

[@kavehadib8402]

Great video sir! Are all the machines compatible with carbide create programming?

[@coolinken]

This was a great informative video! Thanks!

[@UJoyce]

Brilliant. So much info in a small vid.

[@reignworldwide7043]

Fantastic video and presentation!

[@kresimirflatscher8075]

Greetings from Croatia, I am interested in a larger CNC for wood engraving. Working dimension of engraving 600x600mm. Which CNC machine would you recommend? I am also interested in a smaller wood engraving CNC for wood figurines. Which CNC machine would you recommend for that? Thanks in advance!

[@diyfullrangehifispeakers]

Hi Luigi, great video thx. What is a 3 or 4 axis cnc?

[@MRJAWZ_Official]

Thank you!

[@petra3049]

Hello - thank you. I am looking to get into CNC. Don’t want expensive because I am a beginner. Do you know of a good one that is bit oriented without spending a lot of money ?

[@quinettabrown8836]

I'm definitely getting 1

[@BLJuhl]

well done, excellent video

[@johnross779]

Excellent video. 😊

[@benbixel3252]

Thanks for info !!

[@Gotcha6666]

4 minutes 40 seconds in and I'm already subscribed! Thank you for the video, it helped a lot. Best wishes to all decent people from Prague, Czech republic! ✌️😎

[@undoubtedcrow8010]

I'm looking for a machine with a larger work area (at least 35 cm / 14 in) but the Annoytools is out of stock. Any suggestions for something at an affordable price?

[@aeebeecee3737]

mini 3-axis CNC router is very like 3D printer, but do subtractive processing of material

[@seneschal6526]

So a quick correction then opens keyboard and life story falls out stepper motors are actually more powerful than servos ,servo are more accurate and can rotate faster however the flat torque of a stepper motor is actually stronger than a servo. But you will never see servos as small as you see steppers unless you're doing robotics. My recommendation is to skip the higher range small CNC machines and start with the cheaper options as were mentioned in the beginning of the video to understand how they work what they do. Then remember what you liked didn't like and what features you need because none of the aforementioned products that are more expensive are anywhere near as good as if you put some time effort and elbow grease into creating your own. If you're like me you'll understand the need for ball screws if your application has need for any sort of accuracy and stability. If you're looking for strength and stability stay away from belt drive machines they may be fast but the moment they encounter resistance you lose steps. Belt drive machines are fantastic for CNC laser engravers and 3D printing as they're both fast and accurate encountering no resistance encountered. If you're anything like me and you want to see the lights in the neighborhood dim when you turn on your CNC machine then you're probably going to want to go with ball screws and linear block slide rails and a steel frame. After much trial tribulation I came to a final design of a fixed Gantry meaning it stays firmly planted that I created out of concrete blocks using hardwood as the form unlike traditional steel mills though I'm a Gantry instead of a post coming over from behind. My z axis only moves up and down, my x and y are flat and mounted to the base. With this final setup I'm consistently able to take 3/4 inch deep cuts with a quarter inch end Mill into hardwoods at 1200 mm/min. I went down this rabbit hole with no other life obligations other than my dog and job. This hobby can definitely take up way more of your time than you expected. I blinked one day and 2 years and four CNC machines passed by. My first and only CNC router purchase was the 3018 Fox alien with a 300 watt spindle. I was unhappy with its capacity to cut anything. I could barely take an eighth inch deep cut into softwood yet it claimed to be able to Mill aluminum... Buy milk I think what it meant was leave marks with a v bit "engraving" Enjoy the rabbit hole!

[@mussateric5933]

très intéressant !

[@Radvous]

Great information, thanks!

[@drbooo]

I bought the Mysweety 3020 and could not get it to do anything. I checked the out put voltage of the power supply and it said 67 volts dc. i believe the board was rated for 45 volts, i finally returned the machine.

[@ysro5519]

Peace be upon you. In one of the old videos, you talked about the serial number of Canon large-format printers. I want to know that I am from Saudi Arabia and I want to buy a printer from Amazon. How can I contact support?

[@Squddle]

Will all of these cut and engrave brass?

[@HabeebAhmed-nl9qw]

Hi sir, actually i am looking for very small CNC Router Machine to use Cut/Engrave for Aluminum, do you have any machine for this

[@tksUSA]

please can you do one for injection molding machine (plastic)👌

[@paulinepower-g8t]

Great very informative

[@WoodMetalDesigns]

Great review

[@ruaridhwatson2630]

Great video thanks. Also great use of the word gibberish, should be used more for everyday use imho

[@anandtomar760]

i need CNC engraving machine for wood work spevcially for cricket bat scooping, can you please guide me for bestter machine for working and easy for learning to install programs.

[@CentroProstatico]

I WANT TO BUY A CNC MACHINE FOR CARVING STONE 6-8 INCHES IN 3-D. CAN YOU BRING ME RECOMMENDATIONS? THANK YOU

[@MadYocco]

you rock Luigi

[@elihudson7142]

best bro

[@bhupenshah154]

Great great great !

[@historynerd6630]

I guess in the onscreen info at 1:00 you meant to write inkscape not inkspace .... right?

[@ProBangers]

I'm just in the researching phase right now to find the best machine, but I have a question - Why isn't the Ebay/China 6040 on this list? It seems to be around the same price as a Genmitsu but with way better specs.

[@daveymichael6891]

I'm only working with 4mm birch plywood. I don't require it for anything harder like metals. Can anyone recommend a good starter cnc machine to cut small shapes from wood relatively quickly.

[@aslater81]

Maker Store

[@DraganaJeremic-tx4zd]

Can he engrave on polished stainless steel?

[@hailetesfay3313]

Great video . I am very interested in cnc machine but don't have knowledge how to use 😢