Best Laser Engravers and Cutters for Beginners in 2023 | Top 5 |

Are you Looking to engrave any material that you pass by, and want to cut out some fine shapes to sell, or as a hobby? These engravers are amazing.
Here are the best 5 options you can find in 2023.
Links Below
► 1. Longer Ray 5 10W
(Official Longer link : cheaper + Coupon available)
Link to Longer : s.zbanx.com/r/...
Longer ($60) Coupon : RBKGSRTX64R4
★Amazon US Link - amzn.to/3Cv8Jn0
★Amazon UK Link - amzn.to/3GKkXux
★Amazon CA Link - amzn.to/3Swo2Bi (alternative)
► 2. SCULPFUN S9 Laser engraver 5.5W
★ US Link -​ amzn.to/3Cv9Q6a
★ UK Link -​ amzn.to/3UAMAuV
★ CA Link - amzn.to/3dMvaL4
​
► 3. Atomstack M40 Laser engraver
★ US Link - amzn.to/3raEziB
​★ UK Link - amzn.to/3C5L78A (closest alternative)
​★ CA Link - amzn.to/3LGssn4
► 4. Genmitsu Jinsoku LC-40 5.5W Laser engraver
★ US Link - amzn.to/3iqK3VI
​★ UK Link - amzn.to/3iixoUO
​★ CA Link - amzn.to/3Sbo0iC
​
► 5. FOKOOS FE20 Laser engraver
★ US Link - amzn.to/3r0U394
★ UK Link - amzn.to/3SbOxwg (alternative)
★ CA Link - amzn.to/3jQSrhH
► Engraving Bed
★ US Link - amzn.to/3jSFSCC
★ UK Link - amzn.to/3R9Vexw
★ CA Link - amzn.to/3UzXH7c
Luigi's Product Reviews is a participant in the Amazon Services LLC Associates Program. As an Amazon Associate, I earn from qualifying purchases. This video also contains affiliate links. I earn through amazon associates from qualifying purchases.
(Doesn't affect my review, I always make sure to research very well and gather multiple opinions)
Don't Forget to Subscribe!
Don't Hesitate to comment if you have any questions, ill answer as soon as possible!
So,
You have been hearing so much about the Laser engraving and cutting world and want to get into the action!
But you have no idea yet what makes a n engraver any good, and what doesn't.
Luckily for you I have everything covered, In this video you will know all the basics you need and will be able to quickly make a decision about which Diode laser engraver is going to be best suited for you needs.
whether its Low or higher end , after watching the video you will know which will be best for you.
To cut things short though, (pun intended)
Your 3 Main Printer Types are Diode, Fiber, and CO2 Lasers
I will be talking more extensively about Diode Laser engravers in this video, as it is much more accessible to the general population.
Engraver starts out to be quite difficult and confusing.
But once you pass the beginning learning curve stage , it actually becomes even easier than you would expect. that's Awesome!
There are many important factors to think about when getting an engraving machine.
Mainly you need to look at:
If the Printer allows for manysoftware, if It has a good customer service base, Printer speed, power, focus, size , And if there are enough users online who can help you out if you get stuck during your Journey.
You're getting excited, aren't you?
What's amazing about the 5 Options I have today, is that they have all of these features, and more.
To top it up, most of the engraving options provided are cheap, making it a great way to test if you are in to Lasers or not.
You won't have to lose a few months salary just to find out.
I hope you enjoyed the video.
Good luck with your life and have a nice day!

[@MyName-zd9pe]

Thanks for the wonderful info! Best comparison video I have found to help me make up my mind about which one to get for beginners. The 1500-2000 hours of laser life wouldn't be so much of a problem just beginning, depending on the laser replacement cost. When my business takes off, I'm sure the Boss one I looked into with a 10k laser life span will be a great option too. God bless. ♥

[@billymacktexasdetective5827]

Longer ray5 10w is available right now for $320. That made it a really easy choice for me...

[@canal10emartes]

Thank you for your help I just bought number 1 on your list, I bought it directly from the manufacturer and I am very happy with the price. Thank you so much.

[@Betteruthanme1999]

Great video. Very informative. I'm going to go with the Longer Ray5 10 W. You pretty much answered most of my questions in one video.

[@brycebags8989]

did you use the official website or amazon? i only ask because i recently ordered the same thing from the official website so my ma wouldnt see it in the amazon orders (Xmas gift lol) but i dont normally spend that kind of money on unfamiliar websites and im kind of nervous.. sorry for the strange question lol

[@billymacktexasdetective5827]

​@brycebags8989 You'll be fine. I bet you already got it... Super cheap right now, $320 instead of $530!

[@Phanta3]

So perfectly helpful, thank you! 🙏 I love your attention to details, they way you explain specs, how you compare products side by side, and use multiple visual examples. ❤️

[@robinshane4661]

I’m doing research for a friend and came across you. My good luck. I enjoyed your video and now I want one. Not so good. I appreciate your concise information. Thank you

[@GuidoMillonezz]

Luigi this video is top quality! outstanding brother! Gracias!

[@gonzo2.0]

Great video, If you put application tape( ap tape for vinyl sign making ) over your wood you will eliminate the scorching you are getting on your examples.

[@LuigisProductReviews]

Hey Gonzo, I appreciate the feedback. thanks a lot! :)

[@gonzo2.0]

@@LuigisProductReviews welcome your products look good!

[@nexttvc]

WOW. Great Review - I have question - Longer have 20W Model as well. can I engrave the Crystal Obelisk Glass?

[@walonguy111]

Thinking about getting a laser, nice video! Very helpful.

[@SalaziNazz]

Thank you for the detailed review! Your video really helped me decide on the best laser cutter for beginners. Looking forward to trying it out! 🔥

[@irlsolidspace]

really useful details, thanks for sharing. Could you make a video showing the roller. I would be interested to engrave cylindrical shapes like glasses and metallic cups.

[@numberonekisser]

Very informative! Which would be best for making wood blocks for woodblock printing and linocut?

[@samirmoric2576]

Would love to see interesting projects, ideas with laser engraver/cutter. I would like to jump into this business, just need to convince myself

[@LuigisProductReviews]

I think its a great idea. Sorry it will be a while before I can make a video showing different ideas. But hopefully, those website I sent at the beginning of the video can give you some more ideas

[@matthewpointer2590]

Great video! 5 stars!

[@randallsimmons391]

Bene grazie, Luigi

[@CHAOS3RDEYE]

Great video Luigi! Mamma mia!

[@adedamolaolajide8266]

Thank you for the video, very informative. Please which of these can you really recommend. I need the one that can work very well and cut deep especially in wood cutting. Your swift response will be highly appreciated. Thanks

[@irinaklimova7558]

Wow, so impressive. Really nice 👌🏻

[@nicolepaul5981]

Your voice is like what I would imagine silk velvet would sound like if it could speak. ( I'm obviously high)

[@waynenergy]

Thank You so much for the information. You have a very fantastic character.

[@Raydio6]

Do you think the Longer Ray5 10w better than the xtool 10w?

[@mahmoudkasem-xe8tm]

Thank you for this short and useful video

[@patrickrobinson317]

Great video 😊😊😊😊 Thank you for making this video.

[@dutchtess5371]

Thanks for your clear review. I'm interested in buying the Longer Ray 5 10W. However the discount code is no longer valid. Do you maybe have a valid discount code?

[@amandaescamilla]

I got it today for $449. The code didn’t work for me either but it was a good deal either way

[@nataliearena2241]

Really appreciate your time. This helps make our choice!!

[@RoverIAC]

I gave this video a thumbs-up just for the editing.

[@aslanlibzo459]

Whao, that was such a cool informative video! Thanks man, this is exactly how these videos should be presented. Do you personally think the Longer is worth it?

[@LuigisProductReviews]

I appreciate your comment :), the longer was super worth it. I would go for it again.👍

[@kylelutgen933]

Such a great job explaining this!

[@earlinekeepingitreal]

Thanks for your tutorial glad I came across it learn a lots.

[@DGLaserCraft]

Thanks for the great video - excellent presentation.

[@alanastanley8501]

Wow… this video is amazing thank you so much!

[@sic-madeairbrushing76]

New Sub, Great video bro. You answered all my questions and I will be purchasing the Ray 5. I am a Airbrush Artist and just really gonna use this to cut stencils out for my quick art, but might as well get into everything else this machine can do. Thank you. I make content as well and know what it takes to make a great video.

[@nandukumar5904]

Really all videos are very informative and crystal clear,! I am from INDIA 🇮🇳 and i am looking for a laser engraving maching under 15-20k for startup, so can you share me link for the buying option sir!!!!?

[@rhondajones1313]

Thank you for the video. What do you think of the Atom Stacker S10 ? I have not found that much about it on here. Thanks

[@karcos91]

such a great and professionak video! Thank you so much for your work :)

[@paulaestrada6861]

I think this video I learned a few main concept to look into laser cutting & straight forward not like the cricut videos. excellent & gained a new subscriber

[@johnnyvim8284]

Great video, thanks! I was about to buy the sculpfun s9 but after watching this video I am considering buying the longer ray5 10watts. besides the watts, what makes it better than the sculptfun?

[@alexje1478]

Thats's my question too, and should it be 10 Watt or is the longer Ray 5 5Watt enough for beginner??? Thx

[@lucagonizzi2689]

Thanks!

[@user-qt5qt3hf1q]

Hi Luigi's, What type of laser would you suggest for engraving baseball bats? I like the Longer Ray5 but I'm not sure!

[@christosvolikakis1523]

Great, straight to the point and entertaining side-by-side comparison. you have a good format so will be looking for other guides as well. By any chance, do you know what the warranties are on them, how their customer service is? Also, wondering if the highest recommended engraver can engrave hand tools which are most often either mild steel or hardened steel. Now that would be something!

[@DeliberateNRandom]

Thanks for the insightful and well assembled video! You make a good argument for spending a little more money. I was thinking about a cheaper one for just making coasters and tags and stuff, but this might be an all-in, because the one I found for $160 has horrible reviews. Being able to cut would be really beneficial, and probably easier to find replacement parts.

[@LuigisProductReviews]

You sound like a wise man ben :). I agree with you. Wish you the best and thanks for enjoying the video

[@gaijinsanshimai]

Thank you! Simple to understand and informative. This was my favorite review video and i think I know which one I’m getting now.

[@thebigbigdaddy]

Longer had awful burned edges, is that something that can be improved in the software settings? Also, speed wise, how long does it take?

[@diynreviewguy8992]

I would primarily use it for kydex sheaths, I think any of these would work lol

[@Toplaserengraving]

Thanks for the wonderful info Best Laser Engravers

[@glennpesti6519]

Awesome presentation, Can these do multiple boards at the same time? For example, burning a saying on 4 boards in 1 set up, So you end up with 4 of the same plaque?

[@venrismorgan2174]

Hi I am very impressed with the way you describe these five laser engravers because of you I have purchased the longer ray5 10w. Question can the atomstack rotary roller work with the longer ray5 10w laser engraver? I am waiting for your reply please

[@LuigisProductReviews]

Hey Venris, Sorry i'm not sure about that. My guess is, no. But you can go to either atomstack, or the longer website, and ask the customer support on the hotline, I think they should be able to answer that for you quite fast.

[@alana.happy.]

Amazing!!! Thank you so much!!!

[@kennethnjoroge3890]

How much of a difference in performance/time does the Longer ray5 10w have over the sculpfun s9?

[@aliciavega7518]

Can u cut acrylic? Verynice presentation

[@rwrodger424]

I want one! CNC laser cutter for 10 years with Napoleon Grills!

[@yair1956]

Tnx for sharing.I need it for a small Project, which will be he most cost effective to cut through 2MM aluminum sheet ???

[@thehermeticjourney]

Thanks! Super helpful! Which machine would you recommend for engraving on felt?

[@bobhopkins3520]

What about venting? Most videos show cutting being done in a room in a house with no exhaust. Engraving even a small wood object will create quite a bit of smell and cutting metal will cause vaporized metal particles to be floating in the air. Seems like a garage-type hobby to me unless you also invest in some kind of air filtration hose close to the beam emitter. What do you think?

[@andreagate542]

Hey brother great video with an even better delivery of information😂😂 am I to assume that one would not want to engrave/cut paper , plastic, or wood in an enclosed area such as a condo? living room

[@LuigisProductReviews]

Hey Andre Agate, Honestly, you can make it work. But you have 2 options. 1. You place the machine in an isolated room with windows, (the room will smell like a bonfire). Or 2. Get a ventilation system that sucks the smoke out of the house ( a little more expensive, but you can do some DIY for a little cheaper). Thanks for the question!

[@benjaminpastrana9662]

Very professional review a d knowledge 🙌

[@timrobinson3562]

This is our first adventure into laser cutting and engraving. Your reviews were excellent, full of relevant information and very objective. Any update on a good coupon code?

[@prowashpluspressurewashing6717]

i’d like to talk to you about purchasing a engraver and what all i’d like to do with it and get your opinion!!

[@user-bs5oj4gc2f]

Great video, very informative. I had a question, what about fumes and or smoke how is that contained or controlled? Thanks again .

[@seanmcgannon3433]

Hi, thx for the video, very well explained! What do you think of the laserpecker lp4? Is the Longer Ray 5 10W better?

[@MMoment-to3zp]

This tool is very magical

[@MrFreddiew1]

Thanks for your excellent review/comparison.

[@nandukumar5904]

To be frank you look like James Bond sir.! My Favourite Hollywood Actor. ( Charming )

[@ellefjewelry4300]

Hi! Thank you for this video! I'm a jeweller and I'm looking for a laser engraver that is going to be able to engrave inside the rings (not only that, but I absolutely need this option) Is there one available on the market that will be user friendly (I use Mac, not a PC) affordable (but I still have a good budget), safe and will ship to Canada. Thank you!

[@cindyheisler9598]

Will this machine work to cut out fabric for quilting?

[@nathanvanstaden7252]

Its amazing to learn something new is there one you can bay with a software or can you use it with WiFi

[@pejmanjavaheri9758]

Thank you for the video. How does NEJE compare to these?

[@peterarmstrong8353]

You skipped over the input requirements. I am limited to 30amp service for my mobile home, will any of these work?

[@Fossy35]

Really helpful video. Thank you. What is the minimum ram needed on a laptop to run these machines?

[@ajoriordan]

Great video. How does the sculpfun S10 compare with the Longer as they are both 10W? Cheers Alan

[@jayneal8154]

Does your discount code still work for the Longer Ray?

[@relaxsleeplearn]

Hey buddy great video exactly what I was looking for

[@lilqueeniescraftingismypassion]

Great Vid thank you so much, Can the Longer do cups or other round things or just flat surfaces?

[@sicilianauntie]

I would like to engrave river rocks the size of a fist. What one of these would you suggest for that use?

[@buyer92399]

How many amps do you need at the circuit for the # 1 laser?

[@mikealldridge9716]

What is the best laser engraver for Yeti Mugs and Coffee Mugs and Glass

[@adamethancrow]

Insanely good video. Thank you

[@Optikification]

Elegoo Phecda just hit kick start, 10w and 20w laser engraver and cutter.

[@2301JR]

Thank u.

[@aslamali6]

Concise and very informative. Great video!

[@samanthaa1069]

Which one will engrave cup and tumblers.

[@versadesign5820]

Sculpfun S9 is it less good for cutting materials?

[@JayzStudio]

I’m wanting to buy number 4 it’s under 400$ witch is great I just wanting to know does it do well engraving metal tumblers and leather and metal wallets?

[@notsorry5904]

Awesome video! Thank you

[@Ofacnd]

Hi there. I want to start a business with laser engraver. I want to engrave small materials like dog tag, bracelet charms, leather wallet or wallet with aluminum tag on it. Generally materials are stainless steel, silver, leather etc. Which one from this list would you recommend me?

[@k4shiwa]

The discount code doesn't seem to work anymore

[@richarddechau4200]

Luigi do any laser programs have tracing ability? I would like to make copies on a existing product. Thanks Rick

[@user-zi7en8ki6k]

I have a question I want to buy a laser printer I’d like one that prints color as well what would be the best but reasonable price to buy I wanted the longer does it print in color also

[@holliesasmr33]

Hi I want to buy the Atomstack but I am concerned about fumes. I was thinking of using my dining room to do this but I can obly open a door, I have no aircon or extractor (I like in the UK) will I be ok? Also I would have to use an extension plug for power. Any advice appreciated

[@holliesasmr33]

@@MC-bg7ro thankyou for your comment, but in the end decided against pursuing a mini business laser cutting. Now expecting a baby in 2 weeks so won't be buying no expensive machines haha

[@AYAZ_KESKIN]

Hi! Thank you for this video! I'm a jeweller and I'm looking for a laser engraver that is going to be able to engrave inside the rings

[@daphnegalvis9107]

Very Informative for a beginner. Thank you.

[@letmexplainyou]

Does #1, 10w laser supports multicolor engraving or just 20w?

[@lautarosalvador-kz4vj]

Is there a diode laser cutter that can cut HPL (high pressure laminate)?

[@katielyb]

The FOKOOS FE20 is, unfortunately, currently unavailable on Amazon. I have the FE10 right now and have yet to remove it from the box. I don't have a computer right now so, I'm not sure if I'll be able to use it until I get one. I haven't checked to see if any apps are mobile friendly yet but, I'm hoping I can figure something out.

[@user-mv2uu1qk9g]

Hi there you mentioned a discount code for the longer ray 10w??? can you direct us to it

[@paulnandico2370]

What would be needed to cut your own soap stamps? Sounds like one of the 2 last models might work. My wife makes soap for individuals and businesses. She is having difficulties getting custom stamps made that work in soap. Thank you in advance for your input (and making this video).

[@karinabraz5733]

A Sculpfun s30 pro Max faz isso também?

[@cesarchavez602]

Longer ray 5, can you use a compute to run like a Mac computer

[@jonathanlane8250]

With the long range 5 Laser cutter will It cut 1/5 marble tile.