If you find this machine interesting, you can get it through this links: Official store: shrsl.com/45klk Or here: bit.ly/3JdGoEe (package with air assist pump!) or here: hobbylasercutters.com/go/sculpfun-s9/ Use my coupon "BGdedaba" and get it for only 189$! Or here: www.geekbuying.com/go/727rAkdN Or get the improved version, the Sculpfun S30 with air assist: shrsl.com/40y0l (Affiliate link, I get a small commission at no extra cost to you. This enables me to get better coupons in the future so you can have even lower prices with my coupons!) If you want to upgrade your existing laser check the replacement laser head only: hobbylasercutters.com/go/sculpfun-s9-head/ Air assist also available!
@ARSHADPATHAN-ym4je11 ай бұрын
It can be make watches main plate
@ARSHADPATHAN-ym4je11 ай бұрын
Please reply
@JTMakesIt11 ай бұрын
@@ARSHADPATHAN-ym4je what kind of material?
@ARSHADPATHAN-ym4je9 ай бұрын
Aluminium or stainless steel
@AET_DH Жыл бұрын
I love the steel "waste" plate! The idea of holding the materials like paper and leather down with just a few high-power magnets, very cool!
@JTMakesIt Жыл бұрын
Thanks! Its cheap and it works!
@sannyassi738 ай бұрын
You don't need spraypaint to engrave into Stainless Steel, but it does help sometimes. I've found certain stainless engraves really well without paint, while others don't- I think thickness and exact composition of the metal is what makes the difference.
@thetruthserum28162 жыл бұрын
Tip, if you poly, or poly stain your wood first, then laser etch and cut, you are able to remove the burn halos using alcohol and a cloth... It's also easier to brush poly the entire wood before it's cut or etched. Then you can still use the spray after the cleanup for a final coat...
@Trollgaard1st2 жыл бұрын
That sounds like a good tip. Do you have a recomendation for the type of poly to use? I've just ordered the S9 and really looking forward to start using it.
@thetruthserum28162 жыл бұрын
@@Trollgaard1st any poly will do...
@asa100 Жыл бұрын
Sorry guys, but what is "poly"?
@eaman11 Жыл бұрын
@@asa100 polyurethane coating, like a finisher
@michaelbassett14 Жыл бұрын
I’d recommend water based Polyurethane (Ie: polycrilic) because it doesn’t yellow like oil based. Just make sure you stir and don’t shake because you will introduce a ton of micro bubbles in the finish. I also don’t like foam brushes for the same reason.
@SCULPFUNReal Жыл бұрын
Thank you so much for choosing Sculpfun!!!🥰
@countrabricksbuildcraze89162 жыл бұрын
The little box case very nice.
@CissyDragnetyАй бұрын
Super useful info! Appreciate the share!
@indiamultistore2 жыл бұрын
Best Ideas for Use of Laser Cutting Machines !!
@countrabricksbuildcraze89162 жыл бұрын
So dope I dident know it can cut. To. Not just wood burn or engrave
@arturf.22162 жыл бұрын
Hello. I was looking for information on the Internet on the Sculpfun S9 laser. You did very good materials that helped me choose to buy Sculpfun S9. Thank you very much. Greetings from Poland. Arthur
@JTMakesIt3 жыл бұрын
If you find this machine interesting, you can get it through this links: Official store: shrsl.com/40y0d Or here: bit.ly/3JdGoEe (package with air assist pump!) Or here: hobbylasercutters.com/go/sculpfun-s9/ Or here: www.geekbuying.com/go/727rAkdN Or get the improved version, the Sculpfun S30 with air assist: shrsl.com/40y0l (Affiliate link, I get a small commission at no extra cost to you. This enables me to get better coupons in the future so you can have even lower prices with my coupons!) If you want to upgrade your existing laser check the replacement laser head only: hobbylasercutters.com/go/sculpfun-s9-head/ Air assist also available!
@MarshaGrisell6 ай бұрын
I followed the link to the plans for the Flex Box with living hinge & round corners. I don't think the plan at that link is the one you made in the video. I would really like to make your #2 project.
@oakridgereview13592 жыл бұрын
I've got an S6 and while I absolutely love it, I find the horizontal cut to be significantly wider than the vertical. Im considering buying the S9 module. Looks significantly better
@matthewsteslow29693 жыл бұрын
Two questions. First, can you or do you post your test file. Yours is the best I have seen. Second, I see that the laser is expandable if you buy extended aluminum rails. But, what belts does it take and where could you get them? I would assume you would need new belts to make it bigger. Thanks!
@JTMakesIt3 жыл бұрын
I have made a form so everyone could download the test file here: hobbylasercutters.com/download-test-files/ As for the extension I have just asked the manufacturer how this works and where to get parts and I will let you know soon.
@JTMakesIt3 жыл бұрын
I have asked the manufacturer and they said they will soon be selling the extension components for this machine
@skojtv122 жыл бұрын
Could you show us how good the sculpfun s9 is at cutting gaskets in different thickness gasket material?
@JTMakesIt2 жыл бұрын
I could try, but gasket material is very different for each application.
@fredytamayo29962 жыл бұрын
Hello, can this machine engrave a photograph with a decent finish on a stainless steel keychain? Thanks.
@JTMakesIt2 жыл бұрын
I didn't try stainless, but I tried wood and it works very well: kzbin.info/www/bejne/n4a3g3-DptGMjpY Stainless steel should also work, you will just need to set much lower speed
@hailtonsantana7284 Жыл бұрын
👏🏾👏🏾Congratulations, perfect job, I'm setting up a craft shop, this machine will help us a lot. Gained one more subscriber.🤝🏾🇧🇷
@JTMakesIt Жыл бұрын
Awesome thanks!
@markferrick102 жыл бұрын
Watched this video 3 times. Still love some of the 'Things'. Thanks
@JTMakesIt2 жыл бұрын
Thank you!
@MikeSmith-pc9nr2 жыл бұрын
Absolutely brilliant machine and I love the boxes, can you tell me if you could engrave on clear acrylic with this machine?
@JTMakesIt2 жыл бұрын
You can, but you need to paint the surface black to make it work. But you can use watercolors which can be removed easily after engraving.
@AllThingsGundam Жыл бұрын
What's the best balsa wood size ( thickness ) for making small n scale buildings with?
@jf67202 жыл бұрын
Great review, and one of the few I can find. Do you recommend this laser over the Ortur Master 2 Pro?
@JTMakesIt2 жыл бұрын
If you want more cutting power then choose S9. Ortur has better mechanics, but weaker laser.
@common642 жыл бұрын
excellent laser that cuts even thick materials, thanks to the narrow focal point, certainly the best for value for money
@ronhiggs50359 ай бұрын
I have a question, do you have to have a computer? To use these lasers printers. Or could you use a smart phone also?
@JTMakesIt9 ай бұрын
For this laser you need computer. Some others can be used with an app on a phone.
@souqalmjd52842 жыл бұрын
Hello, how many power, speed and pass should I put to cut PVC?
@JTMakesIt2 жыл бұрын
Full power and speed from 300-600mm/min
@mcphilipesla23462 ай бұрын
Hi I have picked up a lot of interest in this as a hobby but mostly as a business opportunity. And I would love some guidance. I have followed a lot of tutorials but I would love to know those lazer machines capable of cutting metals
@JTMakesIt2 ай бұрын
@@mcphilipesla2346 lasers for cutting metal are much more expensive
@jj84822 жыл бұрын
Love the vid how can it cut 10mm mdf? If so how many passes you think I'll neeed?
@JTMakesIt2 жыл бұрын
Thanks for watching! I have never tried cutting MDF, so I can't say it, but the 10mm is about the practical maximum for softer woods. For 10mm Poplar plywood it takes around 20-25 passes at 600mm/min. I think it would need quite a lot of passes. You can go slower and use much less passes, but there would be more charring. For fast cutting of thick boards, you would need much more expensive machine.
@Shoko_042 жыл бұрын
Have you tried cutting clear acrylics? Or the colored transparent ones?
@manech73242 жыл бұрын
Thanks for sharing all of these very accurate tests. I'm trying to start with a decent price-quality device. The grayscale test says a lot about how good this equipment is compared to other devices. Does the roller system for cans or glasses fit on this tool?
@JTMakesIt2 жыл бұрын
The Sculpfun is the best for engraving. Very fine spot and great details. There will soon be a roller system from Sculpfun. But I think Atomstack one should also work.
@herveflagel97152 жыл бұрын
Hello, thank you for your video. Could you tell me how long it took to cut the bottom of the clock (3) and in how many passes. Thank you for your answer
@JTMakesIt2 жыл бұрын
Thanks for watching! I don't remember exactly, but 600mm/min and 6 passes took 45min approximately. It would cut it in way less passes but I always set more passes just to be sure. There is always a stubborn patch of glue somewhere in this wood.
@souqalmjd52842 жыл бұрын
Hello, how many power and speed and interval should I put to engrave on the glass
@JTMakesIt2 жыл бұрын
100% power and slow speed around 300mm/min. It helps to first paint the glass black.
@souqalmjd52842 жыл бұрын
Ok thank you
@iq00992 жыл бұрын
What about air assist? Can you have that?? Did you try the Masking tape on the top and then cut?
@derekessel1142 жыл бұрын
Am a beginner. I love your project but am yet to start learning the lighburn software. I want to buy one of the laser machine. Can you please help me to with the softwares
@JTMakesIt2 жыл бұрын
Lightburn software is very easy to get started because it is very intuitive to use. There are a lot of beginner tutorial videos about Lightburn on youtube. And a lot of useful topics on their forum. And the Sculpfun S9 is a great machine to get started. If you want to save some money, you will find a discount coupon in the video description valid until the end of this month.
@asiadzoana13562 жыл бұрын
I really enjoyed your video..😁😁. but I have a question can you do a tutorial how correctly clean lens...I'm a little clumsy and I'm afraid I can use what I shouldn't or press something what I shouldn't too...😉
@JTMakesIt2 жыл бұрын
You can easily clean the lens with cotton swab (q-tip) dipped in isopropyl alcohol and gently wiping the lens with it. Isopropyl alcohol evaporates cleanly and does not leave marks. You will see how I clean the lens in my next video which comes out in a few days.
@piotrkrzyzowski2917 Жыл бұрын
Will it be good mainly for imprinting stainless steel/metal bracelets? Do you recommend something else? Can you do on a round surface like cups?
@JTMakesIt Жыл бұрын
Check out my last video. The machine I reviewed is just what you need
@КаксеправиТехнология2 жыл бұрын
Hello I wanted to ask what software program you use and with what settings you cut acrylic because it doesn't work for me. Thank you!
@علیطاهری-ت2خ2 жыл бұрын
این دستگاه داخل ترکیه هم هست و اینکه این دستگاه ساخت کجاست...
@msk39052 жыл бұрын
You show this cutting plywood in the beginning does it cut plywood, if so, how thick will it cut?
@JTMakesIt2 жыл бұрын
Useful range is up to 10mm thick for poplar plywood.
@marynabratchyk73219 ай бұрын
Hi! Can you recommend a machine for engraving on jewelry? 😀 I think it's mostly stainless steel or other popular alloys
@JTMakesIt9 ай бұрын
This: kzbin.info/www/bejne/haG1kmmJbMZ4pZY Or this: kzbin.info/www/bejne/gqe4poiFg7unnqc
@gdinternationalpmjr33383 жыл бұрын
Very informative and helpful video. The following questions from a technical point of view: 1) is the Laser Module 90w replaceable if it is defective? if so, where do you get these laser modules? 2) can you also operate a 60w laser module with an S9? or is the electronics (CNC control board) designed accordingly? maybe this question has already been asked in this chat ... 3) same question as 1) for the CNC control board? Thank you for your effort and a lot of work
@JTMakesIt3 жыл бұрын
Hi, the module is easily replacable and upgradable. It takes a less than a minute to remove the head. The s6 and s9 heads are interchangable and so are the driver boards. Mechanically the are also the same. The replacement/upgrade heads will probably be listed on banggood. But the life span of the head should be very long.
@gdinternationalpmjr33383 жыл бұрын
@@JTMakesIt Super cool and thanks for the quick reply! i will order this device with your proposed coupon and i will be very happy to use your advice! I discovered that one side can be extended. do you maybe also know how big this is offered? I am happy to watch your well-structured and well-thought-out lectures again and again. Likewise, I plan the housing like you did in the other video's. Do you have may be plans or a list of components for this? It's just a lot of fun to be here !!
@JTMakesIt3 жыл бұрын
@@gdinternationalpmjr3338 Thank you for watching! It is a pleasure working long hours and producing videos that people like you excited and happy :) I do not know about the extension, but on their site they say that that aluminum profile is standard and I guess you can extend it as long as you like. You would just need to purchase longer belts and cabling would also need to be extended. Maybe they will sell extension kit in the future. But this laser as it is is still very big. As for the ventilation box, I do not have plans and component lists because I built it from the parts I had at hand. I think it is not the best design, but its the best for the materials I had available :) In some of the first videos with laser box I have a link in the description where you can find some more photos with some basic dimensions. Thanks for being awesome and enjoying my videos :)
@JTMakesIt2 жыл бұрын
Hi, Some update! Now you can get replacement laser head for S9 here: hobbylasercutters.com/go/sculpfun-s9-head/ They also have replacement head for S6 and S6 Pro. The heads fit on most laser machines - Atomstack, Ortur, Eleksmaker...
@gdinternationalpmjr33382 жыл бұрын
@@JTMakesIt Thank you for your great info and for thinking of me! I will definitely buy this set including the whole machine. I started planning the electronic controls for the fans and sensor detectors for the housing. It will probably be a few more days until the real thing from Sculpfun S9 is there!
@diegoibanez75492 жыл бұрын
Hello! Does anyone know how to cut transparent acrylic with Sculpfun S9? Tips and parameters?
@JTMakesIt2 жыл бұрын
I don't think you can effectively cut transparent stuff with any diode laser engraver.
@diegoibanez75492 жыл бұрын
oh! Wow. I thought that if it was possible... and make engravings either? Thank you very much for your answer!
@JTMakesIt2 жыл бұрын
@@diegoibanez7549 You can engrave transparent acrylic and glass, but you need to paint the surface black with a spray paint or water colors. After engraving you clean off the paint. Look at this video on how to engrave glass: kzbin.info/www/bejne/fH2oh3ScncSbers
@diegoibanez75492 жыл бұрын
@@JTMakesIt Many thanks! the video has been a great help! I am looking forward to trying it!
@arifnaim4401 Жыл бұрын
can u show me the tutorial to setting for cutting the board using laserrgbl
@JTMakesIt Жыл бұрын
Cutting parameters are the same.
@d.c.fundamentun32002 жыл бұрын
Teria como fazer um video com ela cortando e gravando em acrilico ?ou ao menos deixa as configuracoes ?Would it be possible to make a video with her cutting and recording in acrylic ?or at least leave the settings?
@JTMakesIt2 жыл бұрын
Check the video description for a link to a written website article where acrylic cuttig test was made.
@sallyt.t8244 Жыл бұрын
What is the acrylic ran that can be cut in the machine knowing that I have 2 mm white acrylic but it has not been cut. I don't know why I hope you help me. Thank you
@JTMakesIt Жыл бұрын
White and transparent acrylic can't be cut with diode lasers
@ia72882 жыл бұрын
I wanted to know the lasers watts on it? please cause cause I've seen all the links and comparing prices then I see a link that its about upgrading the laser ?..is it 90w or not ...?
@JTMakesIt2 жыл бұрын
Check my latest video, I was measuring optical power of all my laser engravers
@Alves711 Жыл бұрын
essa madeira que mostra a cortar é com a máquina s9? como é que eu com uma maquina s10 10W não consigo cortar madeira de 8 mm?, a fonte de alimentação deve ser igual á minha "12V 3Amperes, e eu já tive que substituir a fonte por ele não aguentar, a maquina a cortar ela debita 8Amp, como é possivel mostrar essa maquina a cortar madeira que eu acho que tem mais de 6 mm, por favor diga-me
@JTMakesIt Жыл бұрын
It depends on the type of wood. Here I was cutting a very soft and light wood. Harder and denser woods are much harder to cut and take much more power.
@caleasprefericire156010 ай бұрын
what settings do you use for the wooden puzzle?
@JTMakesIt10 ай бұрын
Check the video description
@loicbuhler50213 жыл бұрын
Nice video. I just bought last week the neje Master 2S Plus with N40630 Laser. Did you compare this laser with s9? Neje claims 7.5W optical power :-D
@JTMakesIt3 жыл бұрын
No I haven't gotten my hands on Neje yet., Maybe sometime I will
@GigaVids3 жыл бұрын
it kinda of looks like the master 2s uses a very similar style laser, just ordered a s9 we will see :p
@angeldediosrodriguez83522 жыл бұрын
Wow, saludos desde MEXICO 🇲🇽 quiero construir una máquina laser como esa, de que potencial es el láser? Cuales son sus características? Me ayudarías mucho con esa información 😁 así podría hacer un negocio que tengo en mente
@JTMakesIt2 жыл бұрын
You will find all the necessary info in the video description.
@juangomez20142 жыл бұрын
Great video man!!! Can you tell me what specs did you use cutting the leather? I mean the speed, power and passes. Thanks!
@JTMakesIt2 жыл бұрын
Thanks! Check the video description for an article on my website. You will find all information there including the Lightburn files
@antonellostefini3072 Жыл бұрын
Hello, I don't understand one thing, with the Laser GBRL program I must first make an incision and then the perimeter cut ...... how can I do it? It practically cuts me even what it just has to engrave......help me plese
@JTMakesIt Жыл бұрын
If yo uwant to enrave, you should do the same as cutting, just less power
@jimsly18412 жыл бұрын
Hello. Have you done a review on the xTOOL D1?
@JTMakesIt2 жыл бұрын
Yes, check my other videos
@cathierosa37302 жыл бұрын
I would love to purchase this but have some questions: Where would I find patterns? Also how do you transfer patterns to the machine? Would I need a metal surface to make patterns?
@JTMakesIt2 жыл бұрын
check the video description. There is a lot more information on my website hobbylasercutters.com
@maaikebots8960 Жыл бұрын
Hi JT, I am considering buying this. Can I also make rubber templates with this sculpfun S9 that I can use to apply structures, mandalas, etc. in clay?
@JTMakesIt Жыл бұрын
Yes you can
@souqalmjd52842 жыл бұрын
If I try to cut anything or carve anything, is the head harm or not?
@JTMakesIt2 жыл бұрын
No. Head has long life. But if you cut certain plastics like vinyl, a corosive and toxic gas is produced which can make your machine rust after some time.
@johnbubu83102 жыл бұрын
Amazing review! Thank you very much for your good work!
@puce24012 жыл бұрын
Bonjour, super travail. Quels paramètres avez vous mis pour la découpe du Nombre 2 et quel type et épaisseur de bois avez-vous utilisé. Merci de votre réponse
@JTMakesIt2 жыл бұрын
Thanks! Check the video description to my website article. You will find all the information there.
@puce24012 жыл бұрын
@@JTMakesIt merci.
@ahmedriyami87042 жыл бұрын
What kind of wood do you use for project number 10, and what is the best thickness for this project
@JTMakesIt2 жыл бұрын
3mm thick poplar plywood. Poplar is soft and cheap wood which cuts very well. You can use 4mm or 6mm for a more durable toy.
@rodolfoperez96602 жыл бұрын
Another question, in LaserGbrl software where set the deep of laser to cut, bend and engrave?
@JTMakesIt2 жыл бұрын
You adjust the height of the laser by moving the module physically up or down. By adjusting the height you set the height at which the laser will be in focus.
@lukedavis38965 күн бұрын
We're can I find files to purchase and if I want to engrave
@JTMakesIt5 күн бұрын
@@lukedavis3896 there is a link in description. They are free.
@dhiaachebbi19492 жыл бұрын
What's the mark or the machine and what model is it, And thx in advance.
@JTMakesIt2 жыл бұрын
Check the video description
@L3th4rgy2 жыл бұрын
can it cut metal? if not where can i buy those things that was shown in number 1?
@beer1for2break3fast42 жыл бұрын
Absolutely not. You would require a very powerful and expensive laser to cut even thin metal.
@L3th4rgy2 жыл бұрын
@@beer1for2break3fast4 Good to know
@Robin19561002 жыл бұрын
Can you please show us the POWER and SPEED scale for the Sculpfun S9?
@JTMakesIt2 жыл бұрын
It is already posted on the hobblasercutters.com website. Link in the video description.
@juniorrodrigues71382 жыл бұрын
Qual aplicativo Você usou para testar a Sculpfun S9 ? Obrigado e excelente vídeo.
@JTMakesIt2 жыл бұрын
I used Lightburn software
@SirMundoSantiago2 жыл бұрын
Thank you very much for the information, was really helpful.
@ciromartello68432 жыл бұрын
you can help me choose which one I have to buy laser engraver that engraves and is more precise, I don't care about the cut but the engraving between which to choose ATOMSTACK S10 PRO 50W or Atomstack X7 Pro 50W or laser SCULPFUN S10 thanks
@JTMakesIt2 жыл бұрын
The SculpfunS10 has more stable and precise X-axis mechanics. You can also find a discount coupon for it here: hobbylasercutters.com/coupons/
@countrabricksbuildcraze89162 жыл бұрын
Can it cut thru denim jeans. Or patch work fabrics .
@JTMakesIt2 жыл бұрын
It can cut through denim and other fabrics with ease
@countrabricksbuildcraze89162 жыл бұрын
@@JTMakesIt cool as ...if you ever get any denim ..even if 2 nd hand .any chance. You could try..cuting out sume ..2 checker clothing. Patch works. For me ...in base ball style letter s ..or .old english .or .block letter s .how much $$....would it be .say 15 of each style. And. If it would be much $ to post to me.. if in Melbourne Australia ..
@shajhedmarie4120 Жыл бұрын
Is this better than the s30 pro? Is this brand better than neje? I currently got my first laser and I got the neje 3plus but having trouble with it. Thinking of switching to another. Any recommendations?
@JTMakesIt Жыл бұрын
This is the predecessor to the S30. It is half the power of the S30 pro. I like it way more than the Neje. If you want to compare different machines check my reviews: hobbylasercutters.com/laser-reviews/ or watch my other videos.
@GigaVids3 жыл бұрын
so I just ordered one with your code, I'm super excited for it to arrive and want to know more. I'm going over to your site and reading but anything I should take note on id love to hear :)
@JTMakesIt3 жыл бұрын
Cool! Maybe look some laser engraving and Lightburn or Lasergrbl tutorials online, so you will get a feel how to work with these programs. Just watch out because the Lightburn trial period is only 1 month, so better save that for when your laser arrives. Lasergrbl is free but a bit more complicated to use
@GigaVids3 жыл бұрын
@@JTMakesIt thanks i have been watching a ton of videos on software im going to give them all a shot sooner or later. I 3d print and have found all slicers are not the same .I've been researching lasers for a few months now, first thing I'm doing after I play with it is adding air assist to it I have everything laying around to set it up.
@JTMakesIt3 жыл бұрын
@@GigaVids Cool! I will also make an air assist in the following month or two and post it here. It should benefit the cutting performance of thick materials
@GigaVids3 жыл бұрын
@@JTMakesIt PERFECT !!!! also can this laser 1 pass cut 3mm plywood ?
@JTMakesIt3 жыл бұрын
@@GigaVids it can cut in 1 pass at slower speed, but with faster speed and more passes the cut is much cleaner and better looking.
@TireSpare2 жыл бұрын
Thank you for your review on the product. I am looking for a laser cutting machine that cuts 2mm thick royal board thick paper with having the paper burnt while laser cutting it in close. i need to cut 2~10 mm thick acrylics for my architectural scale models. is there it for me?
@JTMakesIt2 жыл бұрын
It should br able to cut 2mm paper. The only problem I see is in acrylic. It depends on what color it is. Black acrylic is the easierst to cut but 10mm thick is the very maximum for all machines and they will cut it very slowly. None of the machines will be able to cut transparent acrylic, for it you would need a different kind of laser
@ericson7012 жыл бұрын
How cut it veneer about 0,5 mm tick. Most the problem that happend the edge are black and buring by light color wood?
@JTMakesIt2 жыл бұрын
It can cut 5mm veneer. But every laser will leave black edges.
@camuchipvtltd23986 ай бұрын
i have this machine and just realized was not fully utilizing it ...thanks to JT
@JTMakesIt6 ай бұрын
You're welcome:)
@gedio002 жыл бұрын
Hi everyone, I have an Anycubic mega S, I'd like to buy, install and use the laser engraving. Is it that possible? Is it enough and possible to replace the firmware with the mega pro and is it available to download? Thanks.
@ryanbeharry56362 жыл бұрын
Which would you say is better, this machine or the OLM2 20w?
@JTMakesIt2 жыл бұрын
This one has much more powerful laser head.
@ryanbeharry56362 жыл бұрын
@@JTMakesIt so even though both are 5.5watts, this one is more powerful?
@JTMakesIt2 жыл бұрын
@@ryanbeharry5636 it has more concentrated light spot. I am currently testing OLM2 Pro(more powerful than OLM 20w) and Ortur cannot engrave stainless steel, but S9 can. S9 also performs better at cutting thicker materials
@ryanbeharry56362 жыл бұрын
@@JTMakesIt thank you
@thorgersddd1742 жыл бұрын
Some awesome ideas here, i'll definitely be taking some inspiration!
@yasirbalaj4941 Жыл бұрын
Does it cuts original leather approx 5mm ?
@JTMakesIt Жыл бұрын
Yes, but very slowly. Check my reviews of more powerful machines
@soetunlwin31455 ай бұрын
i bought s9 laser six months ago I have some problem in laser head.. I like to ask u something about usage... Pls let me know how to contact to u
@JTMakesIt5 ай бұрын
Go to my profile/about and you will find my email there
@WynterNash2 жыл бұрын
Hey JT, I might be blind but I don't see the link to the free online generator for boxes. Can you post the link please? Thanks so much.
@JTMakesIt2 жыл бұрын
In the video description is alink to my website hobbylaseecutters.com where these 10 projects are described in detail one by one. Next to a box peoject there is a link to the generator.
@evertonmartins48502 жыл бұрын
Hello nice video do you cut mdf? how much deep you can cut? In this S9
@JTMakesIt2 жыл бұрын
Haven't tried mdf yet but I think 5mm should be no problem.
@griva19852 жыл бұрын
Thanks for the video! Did you cut plywood in jsut one pass? What speed (mm/s)?
@JTMakesIt2 жыл бұрын
No I used multiple passes at 600mm/min. You can see how this machine performs for cutting here: hobbylasercutters.com/sculpfun-s9/
@pompesfunebressaintgeourso43912 жыл бұрын
Bonjojur, quels sont les paramètres pour graver une plaque en plastique allant sur les cercueils?
@JTMakesIt2 жыл бұрын
Start at 600mm/min with 40% power and adjust according to the results. You need some testing to make it right for each materials.
@crouchy502 жыл бұрын
where is the link to the free online box generator you told us about??
@JTMakesIt2 жыл бұрын
Link to my website in video description. In the chapter describing the box you will find link to the generator
@humberto3672 жыл бұрын
Hello, JT! Your videos are very good, your approach on this subject is great, I was in doubt which laser to buy, but my doubt was solved, I'm going to buy the Sculpfun S9, I'm a hobbyist. Keep producing good videos, you gained another subscriber on your channel! Please, JT, what are the measurements of these magnets you use? Stay tuned! Thanks!!!
@JTMakesIt2 жыл бұрын
Thanks you are awesome! I mostly use 3mm thick round neodymium magnets with 20mm diameter. These are strong enough for straightening the bent 3mm plywood. But I also have some smaller 10mm round and 2mm tall ones which are good for thinner stuff like paper
@CatharinaKoenheim2 жыл бұрын
What settings do you use for the denim engraving? (I have the same machine)
@JTMakesIt2 жыл бұрын
I don't remember the exact numbers, but I use the lowest possible power that gives you results, because you can quickly burn through. It should be around 30-40% power at around 1000-1500mm/min. The number should be a bit different for various kinds of denim.
@scienziato20002 жыл бұрын
Hello, is this machine capale of engraving sheets of trasparent PMMA?
@JTMakesIt2 жыл бұрын
I haven't tried it, but I think it is possible to engrave the surface, if you paint the surface black with easy to remove paint.
@broosforonline4 ай бұрын
Do you suggest me to buy an algolaser one ?
@JTMakesIt4 ай бұрын
Didn't test it so I don't know. But I have tested many laser engravers on my channel.
@nedesenrab92032 жыл бұрын
Will the S9 module work as a replacement for the Atomstack A5 20w which only has 4.5 optical power? Even though the 4.5 optical power is great for detail it takes several passes to cut leaving my edges way too charred.
@JTMakesIt2 жыл бұрын
S9 module is an amazing upgrade to the A5 20w. The difference is like night and day!
@johnnyvim8284 Жыл бұрын
Is the air assist necessary for everything you did?
@JTMakesIt Жыл бұрын
I did everything here without air assist
@johnnyvim8284 Жыл бұрын
@@JTMakesIt do you think the longer ray5 is better than aculpfun S9? Have you tried it?
@ilnibbiorap2 жыл бұрын
hi... what is the parameters that you used to cut the paper with lightburn? thanks
@JTMakesIt2 жыл бұрын
Check the video description for a link to my website. You should find all the information there
@shaneschuller25132 жыл бұрын
Thanks fir sharing. I'm curious to know how many passes it took to cut 10mm wood?
@JTMakesIt2 жыл бұрын
Thanks. It takes around 25 passes
@shaneschuller25132 жыл бұрын
@@JTMakesIt much appreciated 🙏 Watching from South Africa 👍
@fernandopedroneto4859 Жыл бұрын
Bom vídeo, gostaria de saber o nome daquele produto que vc usou para pintar o metal.
@JTMakesIt Жыл бұрын
Cheap black spray paint
@giogio39002 жыл бұрын
I have seen in videos and pictures, the plug for this machine is a euro plug, or does it come with a standard American plug?
@JTMakesIt2 жыл бұрын
Mine came with Euro plug. But I am in EU
@mansor-xk9iy3 жыл бұрын
Hey That's a great video and very helpful but I have a question What is that black sheet under the machine ? And where can I buy them ?
@JTMakesIt3 жыл бұрын
That is a regular 2mm thick mild steel plate I ordered at a local metalworking shop. It is great because you can fix things with magnets. But with the machine you get a small steel plate as well which is good for a start.
@mansor-xk9iy3 жыл бұрын
@@JTMakesIt thank you so much ♥
@alancheng79522 жыл бұрын
Thank you very much for your great review, has ordered the S9 from Banggood with you coupon you provided.
@JTMakesIt2 жыл бұрын
Thank you!
@alancheng79522 жыл бұрын
@@JTMakesIt Sorry that i might have to cancel the order from Banggood, order placed after 3 weeks, Banggood keeps extending the shipping date everyday.
@JTMakesIt2 жыл бұрын
@@alancheng7952 demand is high for the S9, this is why shipping is delayed.
@stephane5362 жыл бұрын
Hi do you have an exemple on real leather ? The "leather" your are showing at 5:51 is not real leather, but plastic leather (skai).
@JTMakesIt2 жыл бұрын
I have it. It is the next video: kzbin.info/www/bejne/fH2oh3ScncSbers
@paulramey1152 Жыл бұрын
Where is the link to the box generator software?
@JTMakesIt Жыл бұрын
Check the link to the website article which describes these projects.
@s4ss2 жыл бұрын
Hey, great content. What is the cutting surface material that you use ? I can´t quite tell. Is it just a steel plate ?
@JTMakesIt2 жыл бұрын
Thanks! Its a regular 2mm thick mild steel plate
@rodolfoperez96602 жыл бұрын
I have a question, where do you set the line to cut and the lines to engrave?
@JTMakesIt2 жыл бұрын
In Lightburn you can set any line to a specific layer. Each layer is a separate operation (engrave, line, fill., cut.. with specific set of settings like power, and speed and many more)
@joacoglez1652 жыл бұрын
Hola, Excelente Video!!! Disculpa puedo poner el Modulo Sculpfun S9 en una Ortur Master 2. Gracias
@JTMakesIt2 жыл бұрын
If your machine is powered by 12V (regular Ortur laser Master 2) it could work. But I am not 100% sure because I don't have that machine. For Ortur laser master 2 Pro it will not work because the machine is 24V.
@mirekandrassy29282 жыл бұрын
Would be great if you can tell us cutting parameters for each certain application.. Many thanks
@JTMakesIt2 жыл бұрын
You can find some info on my website. Link in description.
@franciscomendonca18452 жыл бұрын
Hey! First, thanks for the amazing video! Second, what SW do you use with your laser engraver? I use LaserRGBL, but it seems a bit limited...
@JTMakesIt2 жыл бұрын
Hi! Thanks! I use Lightburn. It is very good and saves a lot of time. You can try it out with a 30 day free and fully featued trial.
@invictus78822 жыл бұрын
Hello it's just unbelievable. Where can I found this machine
@JTMakesIt2 жыл бұрын
@@invictus7882 There is a link in the video description