Broken blades and clogged water system on the LT40 sawmill

[@VTKingdomsawing]

Lol, love that naturally funny sign-off at the end. The unplanned and unrehearsed moments are so much better!

[@dieterkoch6563]

See Jade's beaming smile is the "Money Shot" we are all waiting for in every video! Now the thing is we need to see it every time-so she will have to learn to fake it .

[@buckwheat3129]

U 2 are hilarious I’m easily amused But watching u running the saw mill and put in a full day of work It’s inspiring. Thanks for being u and letting us join u Cheers

[@phillipcollins9290]

Nice to see a bit of Jade!

[@warrendesonia7924]

It is so nice to listen to women that are intelligent & articulate (primarily Emerald, but I think that the other 2 are also)............

[@gregorytoddsmith9744]

You folks make an honest living and you younger generation are learning a trade. Well done!!💪

[@kurtcraig3421]

yaaaah jade spoke on camera. mission accomplished.

[@jimatmile56]

Loved the ending, so fun.

[@billyshumate853]

It's all a part of running a mill. Blades will break and nozzles will get stopped up. Sometimes you gotta use log's you don't want to. But you gotta fill the order. Take care and have a blessed day and I'll see you on your next vidja.

[@jurgenschur9210]

You are such hardworking and beautiful girls. I really hope you will always take care of yourselves. My grandfather was a carpenter and injured himself with a splinter in the nose. He went not to the doctor. He died of blood poisoning. It was over one hundred years ago, and doctors were also very expensive.

[@larss592]

As a seasoned vet in hands being contaminated in solvents the best fix is to keep distilled white vinegar on hand. It not only counteracts solvents such as gas, kerosene, mineral spirits and many others but if you look on the label for uses, the #1 use is softens hands. I have had multiple ladies work in my business over the years and all would complain about the residual smell on hands til they tried the vinegar. After that it was a staple in the van.

[@tedheierman1181]

Your sister is so cute and deserves more video time! 🙂

[@SullivansTrails]

Beautiful young ladies including mother,who aren’t afraid of working! Keep up the good work! Maybe some fresh squeezed lemon on those hands!

[@michaelbeck3289]

Over time, I loved to see all the uncut and boo that didn't make on the video. You must get a few good ones there. Cheers

[@badass98kx250]

I think Jade is going to come out of her shell she's so ready and funny you all have your own personality your mom and dad are probably so proud my daughter is 15 1/2 I would love to teach her my trade but I work thirds so doesn't work out so good at the moment you guys inspire me to do more things with my daughter tell your Dad get on here more to your whole family is awesome but not being mean Jades my favorite I think she's a pain in your butt and you two together make good videos keep the videos coming we all appreciate you taking the time Emerald

[@dreally7029]

Nice day to be outside! Thumbs up for Terri.

[@Alan_Hans__]

Love your work Jade. :D 9:13

[@mikeh6876]

Another great video today. Love seeing all of the positive energy. All you have to do to remove the gasoline smell is to wash your hands with Dawn Dish Soap. It literally dissolves the hydrocarbons. I use Dawn in place of hand cleaners. Works on grease of all kinds - even the blackest, grimiest grease. Sometimes I need a scotch brite sponge but it works.

[@D1Sir]

I really enjoy the content You make. You all look like a happy bunch 😄👍

[@kitkatcats3360]

I liked this video because it wasn’t all smiles and happiness. Sometimes you just have work to do and it’s not always sunny and cheerful. Reality.

[@bobmoore5242]

I watch a lot of Wood Mizer videos and I have to say your beautiful Hemlock is the best looking lumber I've seen yet.

[@royramey5659]

You guys make me smile.

[@NLSkooch]

Jade smiled!

[@williamkrise2583]

It's nice to see young people hard at work. In some of your video's you show the mountains in the back ground and I think to my self.I know those hills then I realized. Saw them on our way home from college. Before the four lane was put in. You know the mill when is dad going to let you get out in the woods and be a cutter

[@timlawson817]

I like how you keep track of grandpa us old guy need watched

[@sunline24]

Makes for a harder day when things break. Some days you're the dog and some days you're the hydrant.

[@joelheaton8738]

Well done!

[@joelheaton8738]

I just run a Stihl 362c-m in my spare time . Cutting mantle pieces and stuff out of standing dead Pine. Your channel is outstanding. Thank you so very much.

[@jamesmcclure815]

i rinsed off gasoline smell from my hands with isopropyl alcohol. The smell was gone!! It worked !!

[@wileycoyotesr8623]

Funny vid at the end. What does your g-pa think about the operation being on youtube? Something tells me he could be a fun and interesting interview.

[@MartyG1957]

awesome ending. I loved it. lol

[@EuroYardService]

Haha, the ending was hilarious 😂

[@john76411]

really like the every day videos

[@MichaelLeeOne]

I loved that part at the end lol

[@mkelleyp7]

I really enjoy your channel. Very well done! When you cut 2x6s are they rough cut dimension or S4S dimensions (1-1/2 x 5-1/2) ?

[@CGT80]

Another person asked that in a video and they said they are real 2x4's and 2x6's. I'm wondering who the customers are. The building industry is standardized to nominal dimensions so it would cause issues all over the place. If they are working on old buildings with full size lumber, then it would make sense to match what is there.

[@lakeice7581]

Full size 2x6” are 1 3/4 x 5 3/4 after they are planed. Is there a planer on site?

[@craigdonnelly2290]

How about protecting all those beautiful eyes. Relaxing videos. Stay safe.

[@waritko]

Have you ever considered some kind of dust extractor to hook up to the sawmill?

[@fredericktownhomestead8094]

You have a very good swamper/take off.

[@jimharris8707]

Can you explain what wavy edge is and how it's cut (or show it being cut)?

[@paulbarr3981]

A day without a breakdown or issue is in sleep dreams. Negatives happen to prove a lot was being accomplished. The mill doesn't break overnight does it! Okay, everything runs on gasoline motors. How much fuel do you use in an average busy day? Do you have a larger tank on sight to draw from?

[@jamesallis427]

Was wondering if you tried to use a lawn vac for your saw dust pick up the kind you use on a lawn tractor?

[@jar407]

try hand sanitizer it helps when it evaporates from skin love your high tech nozzle tool!

[@whiteoakroadfarms]

If you remove and plug the bottom lubemizer nozzle with a 1/8" grease zerk and run diesel instead of WW fluid you will find your lube use will go way, way, down, you will have no pitch build up at all, and sawdust on the boards will be reduced to almost zero. Oh, and you won't have to worry about your hands smelling like gas if you keep grabbing broken bands with the idle wheel spinning like that.

[@benscoles5085]

yea, I was sitting here yelling at her,

[@verteup]

who wants diesel fuel all over their boards?

[@jamesrussell6870]

@@verteup You won't get diesel all over your boards. It's just enough to lightly coat the back. I've just got a hole in a Gatorade bottle & only give blade a shot of diesel/expired olive oil as needed..

[@redbonemike17]

Had the same kind of day here .....spring start up ....broken blades....clogged carburetor....and operator error ....comes every spring

[@AR15231]

I think Jade drank some coffee, but I didn’t see Emerald filling her cup like normal, what’s up with that?

[@roberttribbie9179]

At about 2:19, 20ish of this video, why does it appear the engine cant's to the left/downward?

[@farmerbob728]

Great video...Sorry about the blade..

[@chipwhitely1490]

The liquid expelled by the saw. I understand it's a lubricant to make the cutting easier. However is it just water or a special semi toxic lubricant.

[@lumbercapitallogyard]

It’s water with a little bit of soap, but it’s mainly to cool the blade down

[@johnsmith-sw7ii]

When setting up the mill what do you add on for the kerf?

[@thedude4632]

Gas on your hands , wash well then use mouth wash to wash again ! Will remove 90% , repeat if needed . This works pretty good .

[@Frank-bh3cm]

Can we get Jade to narrate a whole video?

[@frankmackey2419]

Surprised to see the milling of real 2x4 and 2x anything... it's not used anymore where I build in Maine & new Hampshire...only time really seeing it is demo jobs or renovation. Code enforcement...if there was back then seemed to allow greater distance for the real 2x then the 1.5 inch stuff we now call 2x . What is being built with wet lumber? ... tree forts , sheds .

[@ernestospadolesto8126]

Dang, hasn't been this close to Emerald on a video before - it was almost kiss distance. 😘

[@cameronhamer9432]

I use venella to kill the gas smell , l like it’s Oder better . Not only do l use a peveay , but l have smaller cant hooks l use as l don’t have a auto turner on my LT 30 , nice job , you’ll always have matenace more as the mill ages waiting on your next video. My spelling sucks and the spell checker doesn’t always work

[@deanconner2475]

I know nothing about this kind of sawmill, but I would put some kind of air on that blade to help it stay clean. Good luck.

[@John-yt5zr]

Are y’all’s hands always sticky from tree sap? Our pine trees are covered in sap. Maybe that species isn’t too bad.

[@dennishinkle5010]

Have you been selling your sawdust? Great video.

[@lumbercapitallogyard]

Yes we sell it for animal bedding

[@tomw4231]

Maybe you already told us and i missed it, but where's Zach? haven't seen him in awhile.

[@brentevje5939]

I see you use windshield washer fluid you can buy it in large touts would save some money and you would not have all the jugs just a thought.

[@fredericktownhomestead8094]

Do you live at the log yard

[@nigelparker5886]

Big sis a little pissed with younger sis! Did she put it away...I wonder? Cheers

[@darrenpethoud9554]

Spend all the time ya can with your grandfather. And learn from him.

[@lestatangel]

What's that tool you use to roll the logs with onto the mill?

[@lumbercapitallogyard]

It is called a “cant hook”

[@truckubuddy]

Dumb question.... did you ever try putting a tarp down to catch the sawdust? You could then just use two people to dump the tarp.

[@lumbercapitallogyard]

First of all, it would be too heavy, and second of all a tarp could get caught in the machine

[@timothychristian9140]

The next time you get gas on your hands, try white vinegar. Pour it on your hands and rub them together for 45 seconds or so. Then just wash your hands with soap and water as usual.

[@whatthefunction9140]

Do you get many splinters?

[@colinkuntz7907]

At 8:50 that long hair is real close to the inlet of the blower. Please notice and be careful.

[@charleseck3941]

Where is Sammy? I miss her. Please bring her back.

[@JT_70]

Reported that she and brother went home to MN with their mom.

[@skeets6060]

Where are you guys located ?

[@lumbercapitallogyard]

North central Pennsylvania

[@ralphtaylor3796]

major kudos.

[@berniepenner3352]

You had a board break and created some havoc and destruction of the mill. Please tie your hair back and up, wear gloves and safety glasses. I'm sure the big guy has asked you many times. Love your show and your sisters attitude.

[@Mocking69]

Looks fun ♪

[@mickrose9633]

mom is beautiful 😍

[@joelheaton8738]

Yeah, tough. Be proud of yourselfs!!

[@rickrick7309]

Good job

[@wayneweis653]

Where do you get jeans with a hammer loop?

[@lumbercapitallogyard]

Vintage wranglers

[@ShainAndrews]

Plenty out there. Carhart, Duluth... there are others.

[@wayneweis653]

On a lot of videos, They ask to get people to watch to the end of the video. I would like to see a scan of your lumber yard inventory at the end of every video.

[@VernonChitlen]

No scrunchies in merchandise?? 😳

[@bluenetmarketing]

Do you name your splinters? Like, for instance, "Oh you DfQW#%GT%^&^#!" By the way, you have a good sense of motion, perspective, and viewpoint with your cinematography. It's excellent. You ladies are so good together. The interactions are priceless and totally relatable.

[@lumbercapitallogyard]

Hahaha! Thanks

[@bluenetmarketing]

@@lumbercapitallogyard By the way, you have a good sense of motion, perspective, and viewpoint with your cinematography. It's excellent. You ladies are so good together. The interactions are priceless and totally relatable.

[@buddyreed2623]

@@bluenetmarketing You are an echo.

[@richardtherrien7003]

When are you girls going to weir gloves i get splinters just whatching you guys lol

[@michaelmiller7208]

Chilling with sis! Lol

[@davidpape9726]

You're doing a great job running that Mill. Please do not stick your hands into rotating machinery while it is operating.

[@jamesmcalister6772]

You girls rock and you are also prey.

[@bradh5629]

Your sisters do not seem to enjoy the work as much as you do. Or is it they just don't like being filmed?

[@steveduval3732]

Wait till the wheel stops rotating before sticking your hands near the broken blade.

[@bobscott7621]

Wash with coffee grounds to kill gas smell.

[@zeusdagmire6185]

I hate getting a Petrol Paw.

[@joelbator2505]

The blond is bueatifull also !!

[@whatthefunction9140]

Does the sun ever come out where you live?

[@joecalvi9836]

how about an interview with your mother and granddad

[@iblkn2]

Milk can get gas smell off your hands or cherry Zep hand cleaner.

[@arnholm1384]

🍀..

[@jonnyking6808]

Where is Sammy

[@JT_70]

Reportedly Sami and Zack went home to MN with their mom.

[@johnvelas70]

A friends wife wants to know why Jade is always so grumpy?

[@lumbercapitallogyard]

It’s a question we all ask her on a daily basis lol

[@cgulden]

Is there more than 3 girls, besides Mom? Seems like there was a shorter girl.

[@elliott4570]

I don’t see anyone wearing eye protection!

[@lumbercapitallogyard]

That’s becoming we don’t unless it’s windy

[@elliott4570]

Huh?

[@BossmanEight]

Sisters!

[@williamfleaher5834]

Hope U don't smoke!!!

[@jamesesson344]

Girls wear gloves, your going to tear your hands all up...

[@daverichardson4593]

Gramps knows more that you will in your lifetime... Pay attention... Learn from your elders..

[@georgeshotrodbarn2113]

Well, somebody looks better today, and somebody looks mad like they are having boyfriend problems, again

[@mathisj6582]

For the algorithm.