These are the locking hubs for Luxor wire wheels. Using these hubs and these knock offs you don’t have to worry about your wire wheels getting loose on you while driving.
Пікірлер: 26
@mykoolprojects76592 жыл бұрын
Finally someone did a video on these adapters. Thank you. I was about to order some. Now I will.
@manuelramos794510 ай бұрын
hey mykoolprojects7659 did you e er get the trulock adapters and knockoffs??? if you did how are they doing for you
@lonestarlows Жыл бұрын
New subscriber.. I dig the DYI approach. This design is atleast 20yrs old. As mentioned in the comments roadster/zenith came up with this. I had a set of 96 spokes locking adapter with rings on hubs back in 2001. A great design.
@ridewitmetv22162 жыл бұрын
Roadster wire wheel design that adapter ring and spinner for Zenith wire wheel when they owned it, but all the screws were stainless security hex bolts. The bolts had a pin in the middle of the hex so you could only use the supplied allen key to get them off. I never used the lock on the adapter because it was just that much more trouble to get the wheel off if you had a flat on the side of the road but its still my favorite design..... great video
@user-yh2cw7vw5e Жыл бұрын
I just got some 14/7's with the gold center and chrome lip and they look and ride nice on my brown 77 Cutlass
@jefedejefes32933 ай бұрын
Installed mine, were as tight as we could get them, 100 miles later, loose, and some of the lock bolts were sheared. The bolts were also able to bottom out and would not be in the lock mechanism anymore, printing nylon bushings at the moment to keep bolt where it needs to be.
@gladememmott30019 ай бұрын
Fuckin awesome 😎👍👍👍
@johnpasco14435 ай бұрын
As someone who has these wheels, the screws they sent with it aren’t long enough to go through to the adapter and those bolts the center start to rust pretty quick, might wanna swap out for stainless steel or something
@manuelramos79452 жыл бұрын
Hi just bought some trulock adapters for my car. First time using them. Just have a question the longer screw that goes to the adapter do you have to screw it until it gets tight or just screw it in until it gets flush with the top of the knockoff? Thanks.
@williamramirez2122 Жыл бұрын
What is the length of the longer locking screws ?
@LOSKOPROJECTZPODCAST9164 ай бұрын
We need the length of the longer bolts ? Thanks
@chucke9715 Жыл бұрын
Good job guys, at least there's one smart American out there. Who can figure out how to make Good wire wheels for a Reasonable price?
@gilbertviadani39622 жыл бұрын
hi we’re get screws at longer ones
@bmxpicker2 жыл бұрын
Why they don't make these in 4- lug ??
@bradjunkens78912 жыл бұрын
Did the longer screws come with them? I didn't see them in the boxes
@cappafpv2 жыл бұрын
Mine did come with longer hardware for the locks
@jorgevela34884 ай бұрын
Do they need to be Luxor knockoffs or can regular adapter be used. Just won’t be able to lock
@cappafpv4 ай бұрын
Yes you can use anyone but only the Luxor and the zenith style will work to lock
@manuelramos794510 ай бұрын
I see when you screw the bolts in to the adapter it locks like it gets tight. I have a set and when I put the screw on it goes all the way through the knockoff. any suggestions??
@cappafpv10 ай бұрын
Possibly the wrong size or length
@YourLocalHandyMatt10 ай бұрын
I highly doubt that since they came with the wheels from the manufacture, I doubt they would send the wrong size bolts
@LOSKOPROJECTZPODCAST9164 ай бұрын
Where can I get the longer bolts from ?
@cappafpv4 ай бұрын
Mine came with it. But they are shitty and rusted like the wheels did. Hit up Lowes and get some stainless ones or get a set and have them chrome plated.
@LOSKOPROJECTZPODCAST9164 ай бұрын
@@cappafpvok what’s the size of those nuts ? Thank you 🙏
@rudyfernandez3273 Жыл бұрын
They stole that locking system from Zenith wire wheels, that's what Zenith was known for
@chucke9715 Жыл бұрын
Wow they stold the straight lace and cross lace look also