Luxpro PSP511lc thermostat

[@00Gerny00]

I hate this thermostat.

[@meeplol4173]

same

[@HumFan]

It’s really bad

[@thekingdomwithinu]

MEEEEE TOOOOO!

[@sophiebakuza7896]

Me too

[@haydenhutchinson8992]

WHY CANT I JUST FUCKING TURN IT UP AND DOWN IT SHOULD JUST BE THAT SIMPLE WTF

[@tinkerman5220]

I'm pretty sure they have a basic non-programmable model you can purchase

[@christophernelson259]

thank you my god someone understands how I feel

[@hubertgreene3445]

I have the latest model of Lu pro but not see it listed cannot set temperature

[@dubesquire6329]

hello.. i am a maintenance technician at UC Berkeley. in my building we have this thermostat and HTP water heaters. for the record THEY BOTH SUCK!! the thermostat (LUX) Either wont turn on, or wont turn off! i programmed and reprogrammed, reset front and back. set schedules .. they Either work good or its the riddle. I usually hitcthe reset in the back and front... then program... remember to change the switch to off. if u dint want heat,, and remember. if its on auto.. it will do the program. keep it on off if you dont want ot to come on.. If you have a Htp water heater.. get a tech to check the 3 way vaulve! sometimes it doesn't switch from hot water to heat. it won't do both at the same time. this video helped me out tremendously! thank you.

[@nan2157]

I’m tired of freezing. This thermostat is difficult to use.

[@egtweb]

Agree! Its very difficult to use!]

[@reebaconator]

This remains one of my favorite videos on KZbin

[@Shellyshocked]

Unfortunately because I rent I don't get a choice of what kind of thermostat I use but, I definitely wouldn't choose this one. It works when it wants. I have to have my landlord come fix it constantly.

[@tinkerman5220]

Thanks for the feedback. I know there will always be defective units no matter what the price is.

[@Jimmyf900]

Yeah this thermostat is a piece of junk👎

[@masanchez1992]

Just moved to an apartment with one and can’t figure it out. So now I’m here.

[@moninasantos53]

How to? Cold air comes out instead of hot air. Freezing even temperature set at 75 degrees. 😢

[@bradeythurman9307]

Good review! I thought this thing sucked! We remodeled our house in 2014. We live in So California so we rarely use the heater. Somehow, ours has been locked for 2 years now. We were ready to call our general contractor again to replace... then I had an aha moment. I realized mine was locked! If yours is showing a lock (above am/pm)… hit NEXT, NEXT, NEXT, HOLD Now, I can't wait for my wife to be happy again if it ever gets cold again!

[@endichu]

Thank you!!

[@nan2157]

My brother came and showed me just what you did. I can work it but it’s not my favorite thermostat.

[@nimstennis]

Am I nuts 🥜 or this one sucks ? My apartment is at 82 in summer with ac on ahhhh

[@davidaguilar5070]

I just moved into a house yesterday and this is installed my heater isn’t staying on pissing me off I can’t figure it out

[@wendellmollycheck3669]

Does anyone know what a flashing* means on the thermostat

[@josephfara5224]

How do you change from Celsius to Fahrenheit?

[@jimmagnarelli]

how do you disengage the thermostat from changing the temp for different periods and just keeping at the setting you currently input?

[@tinkerman5220]

I didn't cover this in the video, but the hold button allows you to do just that. It will override the program temps forever until you push hold a second time.

[@mikekeen2862]

Press hold button before you set it

[@Squirrel9282]

Moved into a place yet has this. I hate it. Truly hate it. Just give me something to set the temp and go.

[@Vonstugensniner]

I have my whole week set to be 60f and yet it does not cool my house at all.

[@rojorojo123321]

how can i change central air degrees celsius to fahrenheit?

[@Liv_LaughLuv]

Did you ever find out how? Mines stuck and I can’t figure out how to fix it

[@Ablair37835]

I can’t figure out how to change the swing value after following what you did or holding next?

[@tinkerman5220]

Sorry for the late response. Hopefully you figured it out by now. If you didn't, here are the steps: Press and hold next, press hold, release both and the swing value should now be flashing., use the up/down arrows to adjust the value The meaning of the values is not in the manual. You will have to dig through their website to find that information.

[@tinkerman5220]

DOH! After you get done adjusting the swing value, press the NEXT button to accept the value. You should now be back to the home screen.

[@earthshinerush3842]

How do you turn this on???

[@mediumstudio]

how do you just set the freakin' temp to ONE temp no matter the day or time?

[@tinkerman5220]

Set the temperature where you want it using the up/down arrows, then press the hold button. Hold will lock the setting forever until you remove the hold.

[@heatherolson4043]

Can you take the front off and show me how it’s wired?

[@tubaduba9702]

one of the worst designs ever. F this thermostat.

[@teejaye6226]

Such a complicated piece of shit. Nothing on my thermostat works. Absolutely TERRIBLE product! Do they just make a therm that just has a temp and a fucking on button?? Luxpro is absolute garbage!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@ummuhajar558]

Agreed 💯

[@annedunn1713]

I have an older model Luxpro PSP511 (NO LC) I had a second one - the exact same model - and all I had to do was pop it into place - No wire touching at all - just snapped it in the same place. Can I do the same with the LC version? Thanks.

[@tinkerman5220]

When you take off the thermostat the wire labels should read RH, RC, Y, W, G, C, O, B in that order. If not, then you have to change the wiring also.

[@bokeheffect9430]

I don't think I've ever complained about an appliance online, but man, the interface on this brand sucks.

[@hangerbird]

What does it mean when both the word FAN and HEAT are flashing? I have it set for Run and the fan setting is on the ON position. I don't use the program feature on this.

[@DrMathOfficial]

If you didn't figure out the answer I have it. Let me know if you need it.

[@niqueelavishh]

Can you please tell me. I’m having the same issue.

[@hangerbird]

@@niqueelavishh Because I don't have an AC unit, my fix was to just replace it with a basic model.

[@dmb91964]

Could I use this to replace luxpro thermostat psp511la? The luxpro thermostat psp511la is having a hard time on the heat cycle (14 years old). Difficult to get it engaged and once it does, it won't turn off even when it passes the programmed temp.

[@tinkerman5220]

Yes. This version is a direct replacement for your older model. However, the wiring does not hook up in the same order, so make sure you take a picture before disassembly.

[@Irishgreen56]

How do I change the batteries 🔋?

[@TheSILVIA2486]

What is hold mode used for?

[@tinkerman5220]

It is used to bypass the pre-programmed settings. It will hold that temperature regardless of what schedule you have set until you turn hold off. It's basically a non programmable thermostat at that point.

[@lisaball9669]

I have mine set at 64 but it will go all the way down to 58 before clicking on the furnace! Why?

[@tinkerman5220]

It sounds like something is defective in the thermostat or your main heater. It could be either one.

[@richardljohnson9727]

When are you going to show how to change the batterie da

[@tinkerman5220]

I will try to revise the video to show this. It's actually a selling point because it's so easy.

[@vyp1053]

I’m I the only one here after watching and still dont know how to work it. Why is it so damn complicated.

[@tinkerman5220]

I think it's pretty simple, and I like intuitive products. It could be easier if there was more buttons added for each specific purpose, but that would add cost and take up space.

[@vyp1053]

After watching the videos. I started to fiddle with the thermostat for about an hour. Yup I figure it out! I have 4 of them. The last one was a problem. I did a hard reset and battery changed. I don’t hear the soft click sound for the heat to turn on. What I’m I doing wrong? Help pls. Thanks in advance!

[@tinkerman5220]

@@vyp1053 I just pulled mine off the wall, and the clicking relay sound happens all internally in the thermostat itself using it's batteries. Either you have a defective unit, or the set temperature is not high enough. Try turning the temperature up 5 more degrees and see what happens. Also try new batteries.

[@vyp1053]

I did that too many time. I’m going to give it a try again once more when I get home and get back. Thank you

[@lkgreen]

I hate this thermostat as well

[@somtheBBG]

How do you turn on the heater??

[@aldgatewest8444]

I had my heating system replaced, and this POS was installed with it. Nothing but trouble with it from day one. I believe the A/C company was just unloading them on unsuspecting customers.

[@aldgatewest8444]

Stay well away from them.

[@ilovemybrudder]

Once you’ve set everything for like say the weekday, are you suppose to circle the switch to ‘run’ or do I leave it alone. Im Confused on how to make everything final. Thanks!

[@tinkerman5220]

Yes, turn it to the run position. This is the only position it will actually work in, and allow you to close the lid.

[@deniserogers8922]

I just had the Luxpro 511 installed and I hate it!! I am a senior and am home all the time. I don’t want it programmed and have to go through all those settings. I want the temp set the same all the time. My furnace has never cycled so often and it gets way too hot in my house. I have it on 69, and when I hit the hold button it’s saying 74.. I can’t afford that and can’t figure out how to set it for the 69 24/7 right now. I saw a video that said if you override the system it will only work until the next time setting. Please help????

[@tinkerman5220]

The problem may be with the installation, so I hope it was done correctly. Use the up/down arrows to select the temperature you want, then press the hold button. Hold locks your temperature setting indefinitely. One thing to note is the current temperature is displayed until you start pressing buttons. You will not know what temperature is set until you press the up/down arrows, and the numbers start blinking. It will then revert back to the current temperature in your home after a few seconds. Also, thermostats must be set for electric or heat pump or gas depending on your type of furnace. Again, that should have been done during installation.

[@ronm9270]

My Luxpro keeps flashing and when I put it on daily program to change the temperature it won’t move up or down when I use the arrows. Please tell me what I’m doing wrong.

[@tinkerman5220]

Sorry for the late response. I think your problem is that you have the temperature selector set to "off". It has to be set to heat or cool to change the programming. This allows you to set different patterns for heating or cooling.

[@jhofredavidcacuangotabango4483]

Estimado me sale este error change filter en l pantalla cm lo elimino espero su respuesta.

[@kaypryor703]

Mine is broken. Change filter has been blinking since I got a new HVAC system. I am not able to adjust the temperature. I need heat! Any suggestions? I'm not buying this crap again.

[@tinkerman5220]

You should call you installer. They probably did something wrong. Always check proper operation immediately after technicians work on your equipment.

[@emgoode62]

I do have yhe same thermostat but it won't move from 62 and no heat in the house

[@tinkerman5220]

You may be stuck in hold mode. If you see the word HOLD on the screen, press the HOLD button, and it should disappear. However, if you see the lock symbol on the screen, press NEXT, NEXT, NEXT, HOLD........in that order. The lock symbol should disappear and you can now use all functions.

[@ayelovee]

@@tinkerman5220 thank you so much

[@ronniev3296]

@@tinkerman5220 Thank you!!!!!

[@siad3600]

@@tinkerman5220 Mine has a lock, I tried doing it but it won’t work

[@tinkerman5220]

@@siad3600 Is it exactly the same model as shown in the video?

[@ptricia009p]

It keeps flashing fan on mine. Do you know if that messes with it cooling the temp down cause it’s like mine just stopped working. I had the lock button on it and got it off finally but not sure about why it is saying fan while flashing

[@tinkerman5220]

The flashing fan word means you have the fan button set to "on". This will run the fan continuously, even if it is not heating or cooling. It will feel warm when the air conditioner is not running, or cold when the heater is not running.

[@ptricia009p]

@@tinkerman5220 the fan is set on auto and it started working right again for a week or so but now it’s doing it again

[@ptricia009p]

@@tinkerman5220 thank you so very much for the replies

[@tinkerman5220]

@@ptricia009p I'm sorry, it sounds like you have an intermittent problem. The issue could be the thermostat, or even in your heating/cooling unit.

[@chrisemmert5884]

I could never figure out why mine kept coming on less then 5 minutes after shutting off. I had never heard of the swing setting until now. My swing was set on 1 and now it is on 7. As you said it is not in the instructions. Thanks for showing that in the video. Maybe my light bill will go down then. LOL

[@clairegenett2345]

Hi - how do you change the battery? And what batteries do you use?

[@tinkerman5220]

It takes AA batteries. Very easy to remove cover and change by pushing in on tab on bottom. Much easier than most thermostats.

[@angiecrawford8420]

How do you change to Fahrenheit ?

[@tinkerman5220]

You have to remove the front cover. Push on the tab in the middle of the bottom. Gently pull the bottom out and the front cover off. On the back you will see a set of option switches. Flip #2 to the left.

[@lolaperez9144]

You made it more confusing to me.

[@dianemalk1574]

haha. true. my energy company in Denver came out and installed this . . .

[@ginazambrano2350]

How does the background light turn on. Batteries are new.

[@tinkerman5220]

I think you may have a defective unit. I cannot find any information for disabling the backlight. It comes on immediately when you press the up/down arrows or the HOLD/NEXT buttons, and then times out automatically.

[@ummuhajar558]

Part of me wants to like this video because of you being so helpful, the other part wants to dislike because I hate this thing. But I’ll do it for you 😂

[@tinkerman5220]

I'm glad you understand I'm just trying to be helpful and share knowledge about products. I'm not tied to any manufacturer, so feel free to have a different opinion. I just wish it worked as well for everyone as it does for me.

[@FungusUnited]

Mine resets to 62 degrees after like 10 minutes

[@rc757kslc]

How do u fix or what does it mean override

[@tinkerman5220]

Override is when you change the temperature manually. This will override the auto program, but only until it reaches its' next temperature change. I'll give an example. Pretend it is 3pm and you programmed the thermostat to drop the temperature to 71* at 5pm. You can manually change the temperature to 70* right now, but at 5pm the automatic program will take over and set the temperature to 71*. It is manual until the program has a change in temperature, then it takes over control again. I you accidentally enter manual mode, just rotate the dial to program mode then back to run. You will see the override word dissapear.

[@markb1911]

I also purchase any products that I can made in USA. Yeah companies want to save every cent they can by outsourcing, (sometimes in questionable fashion) but i’m of the same sentiment about supporting American infrastructure and jobs. It is asinine to burn hundreds of thousands of gallons of diesel hauling cheaply made products across an ocean to be used a few times, snd then end up in a landfill here somewhere. Most people don’t give a crap about this issue though so I figured i’d leave a comment

[@antunezargueta6569]

Como puedo deslakiarlo el control del aire acondicionado marca luxpro

[@mariaesposito274]

Mine has all 8888 on display window..(?)

[@chrisstevens3567]

I just switched thermostats. By far worst one I’ve ever had.

[@alexgoldstein7997]

Great! Thank you!!

[@phyllis265]

Thank you, this really helped

[@dorothydaniels5522]

6 kids under the age of 5. And it wont work. 85 degrees in the house

[@marilyncaldwell6780]

Is this a wireless unit to replace my TX500? Is LC same as LCA?

[@carmonas182]

I aged 3 year watching this

[@wayneadams7015]

You’re lucky you only aged three… GET TO THE POINT ALREADY…. Geeeeeze

[@Otxoamusic]

This is the worst product of all time

[@googlewreckedit]

lol why all the hate on this thermostat? It's a thermostat, folks, not a particle accelerator.

[@shawnmccabe1200]

It doesn't work as described.

[@buffneilson]

This thermostat is a piece of sh!t Never again, LuxPro!

[@shawnmccabe1200]

The worst thermostat ever.

[@doreendidario6480]

Me too these are the worst

[@adesign3755]

This did not help at all

[@tinkerman5220]

Thanks for watching

[@wayneadams7015]

I’d agree. Way to much bs talk, get to the point, how to set it.. then move on.

[@KPDYSTINIE]

how to turn on aC?

[@tinkerman5220]

First, set the left dial to "RUN". Next, move the temperature selector switch to "cool". Finally, use the up/down arrows to set your desired temperature.

[@rigobertolopezmateo]

@@tinkerman5220 change filter indicators need to be changed?

[@rigobertolopezmateo]

In order to adjust temperature?

[@tinkerman5220]

I do not know, but you can try it. Rotate the dial to the "air filter" setting and press the up/down buttons at the same time to reset it.

[@Irishgreen56]

How to change the batteries

[@aldgatewest8444]

I've just about lost all my patience with this plastic piece of crap.. You only have to literally touch the thing and it loses the setting. I'll never use one of these things again.

[@darioalberto12]

this thermostat is the WORST SHIT i’ve ever seen.

[@archiemoses8770]

Hate the thermostat too

[@aldgatewest8444]

Tinkerman must work for LUX to approve of this junk.

[@dyeefoon]

I bought this house with this POS in it and i want to rip it offthe wall i hate it.

[@lolaperez9144]

I hate that stupid thermostat

[@troyatlas5245]

He never explained anything about how to just run the heater. Turn off if you don't want to use it but this science project explanation was ridiculous and lengthy. First thing first, just tell me how to turn it on and get heat. Mine doesn't even work

[@adesign3755]

Just get to the point please!

[@lynnerose8394]

You need to wash your hands before you show them in an instructional video.

[@benchesoftreblecarolyn9147]

That was a rude comment. Focus on the thermostat and the info at hand.

[@heysupable]

Nasty ass nails but thanks for the tutorial

[@tinkerman5220]

Life of a mechanic. :(

[@badhabit714]

😂😂😂😂

[@marilynkeogh1930]

Give him a break...he’s doing his job...

[@realroyal8167]

Me too

[@fernandodelgado6842]

Tradução português

[@josephscott6642]

🇺🇲🇺🇲🇺🇲

[@CloserMoise]

Me too