Sean works on a metal roof and takes off an improperly installed metal pipe boot and replaces the metal pipe boots according to manufacture specs.
Пікірлер: 56
@lornadesmarais4650 Жыл бұрын
Love the detail in this video. Great presentation and it has gone along way to making me feel more comfortable about the metal roofing projects that I have coming up. Answers a lot of questions!
@marcusjames3035 Жыл бұрын
Man! So I had a plumber vent my pipe right next to the rib like you have here in the video. I tried a boot on there but it looks like poop and just isn’t gonna work. Your video is the only in depth one I see on KZbin explaining in detail how to fix it. Gonna get on this right away. Excellent video, very detailed. I wish the camera would have shown from the top looking down to see where the Z track met the rib. Thanks buddy
@kevindowner766 Жыл бұрын
Great video. I'm actually gonna run into this problem this week and I love this detail.
@2nickles647 Жыл бұрын
I liked the details. I had a steel roof installed a few months ago. I'm going to check my vents and see how well they did the work.
@bappa86568 ай бұрын
This is a GREAT IDEA! THANK YOU!! LOOKS PERFECT
@billbaillie37027 ай бұрын
Don't forget to seal (Along the edges) of the upper 2 pieces of z bar to the roof & where the upper corner of z bar intersects the rib.
@als4817 Жыл бұрын
Excellent explanation and detail. many thanks !!
@santinomartinez7592 Жыл бұрын
I don't do metal roofs but I enjoyed watching your video!👍
@springhollerfarm8668 Жыл бұрын
I guess I missed it but how does this solve the issue of the water coming in from inside the rib?
@KernelBill Жыл бұрын
Thanks so much! as a temporary stopgap measure, I might just put a squirt of that solar seal right where the boot is crimped over the seam and leaving an air gap. Or a squished up ball of butyl tape like you described. Longer term. I think I might get a small metal brake and try just what you showed.
@donpace6405 Жыл бұрын
Boy someone really did a crappy job installing those how did they get by with it being left like that really horrible just looking at those .You can tell you really know your stuff Great job you did
@Charlies1970TA2 ай бұрын
Fantastic info! Thank you so much.
@arihummelsxboxone6038 Жыл бұрын
Good stuff brother 🙏
@mrorbit2u11 ай бұрын
Clean job👍🏻👍🏻
@robertmarshall6638 Жыл бұрын
Fantastic work.
@CenvarRoofingandSolar Жыл бұрын
Many thanks!
@user-on1um7hb7p5 ай бұрын
Solid video man!
@johnlieb1 Жыл бұрын
been on roofs over 30 years and never seen this done. nice
@johnlieb111 ай бұрын
the original detail is a leaker. His fix was nice @@murphysaquatics
@groundcontrol27959 ай бұрын
It was able to be sealed and monitored all the way around before. Now, it is all dependent on the seam(s) of the z bar, which are now out of sight and reach to reseal.
@robgarcia16314 ай бұрын
nice repair. great tutorial
@CenvarRoofingandSolar4 ай бұрын
Glad you enjoyed it!
@willthomsen75695 ай бұрын
A bar at the ribs with the seam sealer scares me a little bit. You’re clearly a very good carpenter tho man respect
@CenvarRoofingandSolar4 ай бұрын
🫡💯
@patonjared Жыл бұрын
This guy seemed like he was learning himself during the video! The last method of marking out zbar seemed a lot more practical. That would drive me crazy as a home owner seeing those details not line up.
@sethdistler533218 күн бұрын
No he definitely seemed like a pro that has done this countless times. Not a wasted movement.
@justinbond7435 Жыл бұрын
2:53 he explains the problem, then at 25:05 he makes the same mistake he tried to prevent.
@rooferkyc9179 Жыл бұрын
First time I see a pipe boot installed like that, interesting stuff but i don't do metal roofs, can you imagine doing this same repair on a metal roof 2 story high at a 12/12 pitch?
@MYRONone. Жыл бұрын
nice
@renurenovationsllc7780 Жыл бұрын
Guys should be required to move pipes if Necessary to put boots on the flat. The siphon notch on the over lap of screw down metal can even be an issue. This one, even after he re-did it is still so-so, because of the over lap.
@99kevin992 ай бұрын
10 years later on my DIY standing seam snaploc 22-squares roof I realize I installed the seam boots wrong. Gonna have to pull them off and do what this video shows...
@vp7101Ай бұрын
What is that platform your standing on. I have a metal roof on my barn that needs a small repair but I'm concerned I'll slide off. What's the secret to walking on a metal roof safely?
@bodyzoasispersonaltraining9186 Жыл бұрын
Do you need a steeper angle boot?
@786otto Жыл бұрын
Never installed a metal roof and never will but that was interesting😄
@user-yl6yy2yj3n7 ай бұрын
Yeh should've left it alone. Very creative though
@actuallynevermind81209 күн бұрын
i can put the boot on a rib ... you have to caulk the rib from the boot to the ridge ...
@sescher44879 ай бұрын
Well... you said "installed incorrectly." Not sure about that. You had to muscle those off, and they wouldn't have leaked for 25 years. Sure yours is nicer. But ugly and works doesnt mean incorrect. Just sayin
@dustina6261Ай бұрын
Well it’s installed incorrectly when it leaks, which like he said all during the intro was all wet inside the boot. Just because it’s hard to get off doesn’t mean installed correctly. Ugly and leaks is far from correct or professional, just sayin.
@terryhill473229 күн бұрын
I get your point but minds installed over the metal- V channel and hasn't leaked at all
@terryhill473229 күн бұрын
Mine is heavily siliconed around and under the metal and rubber gasket
@redsresearch5 ай бұрын
y not just remove the old caulking and put on a new boot why do all that?
@christophergriffin8344 Жыл бұрын
Look at it it's pouring out like a geyser hehehehe
@eithieus1652 Жыл бұрын
Put duct tape on your tools to stop the scratching. 👍
@anthonytodd5308 Жыл бұрын
Observations 1. Using thin garage metal, 26 or 29 2. Aesthetically pleasing but still has the same weak vulnerable leak spot, the upper side relies on caulk to keep it from leaking.
@rymichael7203 Жыл бұрын
pointless observations Anthony
@ZeTafka10 ай бұрын
Id say the end result is worse than what it started at as Snow melting and Freezing(expanding) , snow sliding and moving...Is just going to mess this flashing up over few years
@thonysanchez3564 Жыл бұрын
It won't leak the way it was before it looks weird the way you did if you did not want the rib you culd ask a plumber if you culd move pipes .
@Sum-Ting-Wong718 ай бұрын
This is an absolute disaster in the making which will without doubt end up causing more of a leak than it attempted to fix for the sake of simple aesthetics. This is only going to last as long as the caulk does and that's it.
@fatjoe33912 ай бұрын
Working with metal without gloves. Hmmm OSHA frowns on that.
@ZeTafka10 ай бұрын
strongly disagree with the detail . Specially in that climate
@rubenrescendiz9734 Жыл бұрын
200
@kyledean6659 Жыл бұрын
What a sideshow nobody's paying a guy all day to do that
@billbaillie37027 ай бұрын
It's a demonstration video...
@TheGregWallace Жыл бұрын
Comment.....Lazy installers.....so imagine what else they did wrong.
@johnbailey2024 Жыл бұрын
So slow, I have to stab myself in the eye, if I had to pay you by the hour