M series swing turnstile installation guide - MairsTurnstile.com

M Series Swing Turnstile Installation Guide
For mroe details, please check:
mairsturnstile...
Step1: Open the packaging, tear off the plastic film, check the accessories and instruction manual.
Step2: Adjust the position to ensure that the machine is in the correct position.
Step3: Open the cover, Mark and drill holes.
Step4: Installing a card reader.
Step5: Connect the card reader to the controller.
Step6: Connect open signal wire to controller.
Step7: Connect open signal wire to motherboard.
Step8: Connect the controller to a 12V power supply.
Step9: Connect the sync cord. The cord can pass through from the bottom or from the top.
Step10: Connect the power switch.
Step11: Fix the machine with expansion bolts and close the cover.
Step12: Power on and turn on the power switch, test machine operation, complete installation.