M12 3" Cut off tool

[@jmc_1178]

Clicked on this the second I saw you did a new video. Started watching almost 2 years ago and hope to see more of you and your content. You had hands down one of the best tool channels and a style that set you apart and we all want to see more and see you do well and succeed.

[@MillisConstruction]

You’re back! You were a big inspiration for me to start my channel 😁 Don’t tip that bucket!!!

[@reedburtnett6108]

Welcome back Mike!! Your videos were my inspiration going into electrical! Learned all the right tools to buy and the mindset to have before i even started my first day! Big fan!

[@jasonshumaker3630]

Saw your video in my subscriptions tab, almost couldn’t believe it. Welcome back, hope you decide to keep up with you tube. Many of us really missed you, love your style. Most of my early tool purchases were based on your review videos. Wera screwdrivers, knipex Pilar’s, Milwaukee pen light, the list goes on!

[@josephlabranch6595]

Good to see you again, thanks for coming around, from another electrician in California.

[@toolsandtrash6911]

Glad to see you back man! You inspired me to start a channel!

[@MillisConstruction]

Tools and Trash hey! I subbed to yours. Great content 😁

[@luisnieves7183]

Hey Mike so happy you are back man!Sorry about your lost!Hope you will post some cool videos about tools!

[@SMee67]

Look at all that love pouring in for you, mate. 👍🏽 Can definitely say we've all missed you, man. Shit hot review on that baby grinder, glad you didn't take to it with a hammer and drive it into the workbench! 😉😆😂😂🤣🤣

[@neeko7878]

Welcome back Michael!!! 😊. Used that same cut off tool recently to precision cut a ton of stainless. Nimble and small... yet burley and capable. 😊👍. Check out the M12 porta-band. Works well too.

[@BradsWorkbench]

Ah shit your back... well there goes all my subscribers 😂 good to see ya around again

[@upsidedowndog1256]

Nice to hear from you! I wondered how you were doing the other day. I am shopping for another shed and may need to build an offroad cart. I guess you never needed to. Glad you are OK!

[@HardKnocksForge]

upside downdog I’m still waiting on that damn off road cart build...

[@jeffparker360]

Right on man. Glad to see you're still in the mix. That tool has been on my radar for a while now. I'm hoping they have a good sale price on it this holiday season.

[@repro7780]

Mike's back! Still an electrician? I loved the electrical content, Klein tools, etc. Hope we see more!

[@themaintenanceman1]

Great review! Good to see you back! Thanks for the video 👍🤘 I have it as well but haven’t found a good purpose for it. It’s a neat tool for sure.

[@denisouellet6518]

Hey Mike! We missed you for a while. Great review as usual. I wanted this tool since its introduction. I'm just waiting for some special.

[@1pcfred]

I have a cordless drywall cutout tool I use as kind of a 1/4" collet chuck die grinder. I have a 3" disc arbor for it. I've never cut any drywall with it yet. The cut out tool doesn't reverse.

[@justwrenchit9287]

Glad to see a new video. Not a bad cutoff especially for just being 12v.

[@georgewahlers2249]

Glad to see you're back you can buy those three inch cut off wheels at Home Depot Lowe's anywhere

[@982Nighthawk1337]

Hey Mike good to hear your voice again. They sell Campbell hausfield 3 inch cut off wheels at the Walmart near me.

[@carlmccoy662]

You can get a shroud for dust recovery, put a drywall/plaster wheel on this tool cut at 1/2" depth without risking damage to "whatever" is in the wall. It is a little whimpy, but it is my first choice for cutting a small repair hole in a wall. It is a really nice tool. One good thing about it being "whimpy" is that it will not get away from you. Unless of course you are more whimpy.

[@MrNineTeez]

Thanks for taking the time to make another video mate. Hope there are more to come

[@tumbleweed5958]

Glad to have you back Mike! Another like minded American offering the best tool content!

[@jaynaforsgren4755]

My heart stopped when I saw this

[@aidenglunt]

Glad to see you back! Sorry for your loss.

[@Danko88]

I just bought this on sale. 1st thing I said was sure would be nice to have a tool storage spot like allot of other tools. still love the tool for what I use it for.

[@Bryan-df7kc]

lol “come at me osha!” 😂

[@trellise9811]

So glad to see you back, Mike!

[@CristianZatonyl]

Hi mike!!! Welcome back buddy. We miss you! I’m sorry for your loss, we are happy to hear back from you. Hope you doing well

[@jamesandonian7829]

I heard he was in jail but 🤷

[@electricfil]

You're a great dude. Love your vids. Intro had me lmfao

[@BeerStud]

Thanks for the video. Good to see you back. Keep the videos rolling.

[@kotocb]

gr8 to see you man

[@eltedo804]

Glad to see you back Mike

[@braydangardner9088]

Good to have you back glad to see your alright

[@lukejerram749]

Keep the vids coming mike used to watch all the time! Top quality

[@toolsandtrash6911]

Been looking at this tool for awhile I was kinda on the fence about it but sounds like I'm going to get it

[@TonyTheTechnician]

He is alive!!!! Good to see you back man. I want that cut off wheel I might just get one

[@KevinPerezTheElectrician]

Hey Mike glad to see you back!!! I like that cut off tool. Get you out of a jam.

[@bigalcervantes5118]

What's up mike looks like your a Milwauke tool freak lol. I'm 50 yrs old and always wanted to become an electrician. My dad is a retired master electrician, worked for an oil company did very well. I have much respect for all of you guys. Ive been wanting to change careers and become an electrician. However I think my age has held me back. Great channel my friend!

[@heathwillard95]

Glad your back man, hopefully for good! Keep it up bro. And also do you thank you could fit a smaller tile saw blade on it, and would it have the power to dry cut some floor tile for your small awkward cuts instead using your corded grinder?

[@ethanzaka5892]

I watch your videos all the time

[@americanstreet8704]

What up Mike glad your back I remember as a little kid I made a stupid high work bench lol

[@tek4]

Missed seeing your videos lately, keep up the great work. Also buckets are rated at 200 lbs ;)

[@JUSTINATV]

Glad to see you back!

[@deanperkins2091]

So glad to see another post!

[@GeorgeJFW]

The M12 line is fire

[@NoWay-vz9xw]

Glad you're back Mike!!!

[@jasonjordan6435]

Miss the shed soooo much !

[@jdcustoms1982]

So good to see you back!

[@BeardedSeabee82]

Damn... a bucket... wtf... didnt think you were quite that short..... good to see you back bud. Now i suppose on to the rest of the vid!

[@arianmartinez5529]

I love your videos man I just found your channel and love it keep up the good work

[@LEGOCAMARO]

Glad to see you back bud

[@batnav10]

Good to see a new video from you.

[@AntonioClaudioMichael]

Great video Mike

[@keegananderson5924]

good to see you’re uploading again

[@truckerpeterose]

That’s odd. Mine is variable speed. I just bought it today. Could they have possibly updated this tool?

[@Jerrynan]

good to see you Mike

[@glasgowgreen6300]

Glad your back bro 👍 Dump the bucket haha and raise the whole floor and use it for storage

[@levitaylor8105]

You got to make the turdinator lure brother. Thumbs up for a turd lure Sorry wong channel

[@jesterraj]

Would this be suited for metal working than a person in trim carpentry??

[@capnjimmy7357]

Looks cool. If Ma Cheata comes out with one ill definitely buy one. Not sure its worth another platform to deal with.

[@MikesToolShed]

You can definitely do with out it, but its pretty sweet for real specific things

[@zacharyheward7122]

Welcome back Mike!!!

[@mikes8839]

Have you cut drywall with that, if you did dose it make alot of dust?

[@danmckevittstoolsbagels3258]

MIKE MIKE MIKE!!!!!!

[@themaintenanceman1]

Dan McKevitt's Tools & Bagels MIKE MIKE MIKE MIKE!!!!!!

[@robgrujicic5380]

Thank you for sharing 😃❤️👊🇨🇦

[@darklorddylan1316]

I hate high benches. I'm definitely not short but I like being able to sit or stand while I work on shit. The back just can't handle too much bending over.

[@andrewsantillan4798]

Ice never clicked on a video so fast

[@TheJlogan27]

Mike son god dam your back

[@kennethstephens8046]

Holy crap dude. Been forever

[@tylerray6283]

You’re back holy shit

[@juancarloslopez688]

Dremel rotating tool si a very different market or user or job Target than the Milwaukee cut off tool, no comparison. Milwaukee cut off tool could be compared with the Dremel Saw Max tool.

[@electriciantv5174]

Hey man it’s good to hear your voice again

[@scrambler350]

Got a link to the cut-off wheels you bought on eBay...?

[@jackhammer9622]

Welcome back!!!!

[@vincentesaldana4456]

Mikes back!!

[@BuiltOverBot]

How about changing the channel name to elfs tool shed glad to see you back

[@darrenfarrell5690]

Welcome back.......

[@_P0tat07_]

Golly, glad you’re back!! Also I was really afraid you would try to cut that ratchet with it, even though I knew you wouldn’t.

[@JS-tu1ti]

Hey this is great!!! New content!!!

[@Toyotas_n__Tools]

You're a nice tool, You fit in the palm of a hand, you're less bulky, you're lil over 10 inches

[@Connor-wv6ln]

It’s neck height at 4 feet?? How short are you?

[@davidmccord8966]

Hell yah, He's back!

[@jrelectrician4387]

Nice Tool 👍👍👍👍👍👍👍✌✌✌✌

[@burnedupsparkytipsandrevie9597]

Oh shit mike is back welp there goes all my shutdown paychecks on new tools. Also i heard its the tits for HMIs and removing bolts on peckerheads

[@shadowops3653]

Glad to see you back fuckee lmao

[@HardKnocksForge]

I'm surprised that you're only using one bucket...

[@MikesToolShed]

And it was a 3 gallon, so smd

[@HardKnocksForge]

Mike's Tool Shed you’d have to stand on a 55 gallon barrel for that to happen...😘

[@boydbros.3659]

OSHA has entered the chat ... LOL

[@EDC_Tactical]

There is literally no point to this comment other than to add a comment and help with the algorithm Keep the vids going again

[@cwell2112]

Why is it reverse threaded if it spins both ways?

[@MikesToolShed]

That is an excellent question

[@doranharris3052]

Yeeaaaaa your back!!!

[@nirpy]

The eagle has landed

[@madeinusareviews6234]

HEY! Its MrMike How have u been!?

[@johnathonscheurer1233]

Hes alive!!!!!

[@MRSOMTHINBASIC]

Mikey 👍🏻

[@JUSTINSTURGILLTRUCKING]

Why is that workbench to tall

[@hosbearanda889]

How tall are you?

[@grilledcheeseeater3443]

how short are you?

[@VictorGonzalez-ir1qc]

Cool

[@davidmaldonado8495]

Finally!!!!

[@homerplayz5107]

Yay your back did are you moving to your dads old house

[@4everwatchingalwayshere475]

My benches i built are 46" high but I'm 6"5

[@FaroesePictures]

I get goosebumps when you touch the blade, when the battery is in... Not recommended