M2M GARAGE Episode 1 - HIGHLIFTER 850 2 INCH LIFT KIT!

[@Smodlee]

Have u put on the stock wheels and tires to see if the rear tire clears the snorkel? It says a “1” inch spacer is required for clearance

[@jonathanwharton5837]

Race driven never lasts more than one ride.

[@willwestbrook8687]

Was up buddy were did Yu get your handlebar mud strap?!?. I've looked everywhere I'm bout to put that same lift on my 2021 now.

[@MUD365op]

Those rims look good! Sweet Bike

[@2livedru]

When it comes to your beer, don’t cheap out

[@madeiimuddofficial3967]

Dru absolutely. More bang for your buck

[@tshepp5928]

Hey man are you running stock axels? Have they held up or have you had to upgraded them?

[@chrismartin7662]

Wish yall made more content!!

[@minekaiju77]

Looks good. How much more of an angle did it put on the driveshafts?

[@madeiimuddofficial3967]

904wheelin Really was minor change I didn’t really notice any changes in the axle angles, zero issues!

[@StaceyAmour]

I'm all about gaining two inches

[@madeiimuddofficial3967]

2" of terror!

[@TCMOutdoors]

Have you had any trouble with exhaust heat on your tiger tail? I have basically the same setup but haven't installed my tiger tail yet because its so close.

[@madeiimuddofficial3967]

Trash-N-Treasure no not at all! I wouldn’t worry about it, it’s still functional to this day and doesn’t seem to have any heat damage

[@madeiimuddofficial3967]

Trash-N-Treasure what bike do you have?

[@TCMOutdoors]

2019 850 highlifter

[@TCMOutdoors]

I put it together but didn't leave it in yet because of how close it was to the exhaust. I literally just hot the bike like a week ago so its gonna be a little bit before I do aftermarket exhaust and all the and yours is the first I've seen with stock exhaust and the tiger tail on a high setting.

[@madeiimuddofficial3967]

Nice!! The 2019s are where it’s at!! And yeah I know an aftermarket pipe setup would help move it up and away more for sure. Let us know how it goes when you do man!

[@catjackoff-road855]

Nice machine. So the 850 doesn’t come with power steering a friend of mine who is older mid 50s is interested in buying one but figured it would be tiring on the arms with the 30s on. I told him I’m sure you wouldn’t notice it. Do you find it much different then power steering models?

[@madeiimuddofficial3967]

It's definitely not the most pleasant turning experience. The 850 has a terrible turning radius, so lots of back and forth turning left and right. But if you're rolling its not bad at all. The 570 we have has power steering and its a delight! so easy one handed driving all day long. Definitely love having it!

[@catjackoff-road855]

Made II Mudd Official yea my xmr 850 has power steering it’s nice but it needs a lot of area to turn

[@madeiimuddofficial3967]

Cat Jack power steering makes mud life easier haha 😂

[@catjackoff-road855]

Made II Mudd Official for sure I told my buddy he said he put an order in for an 850 highlifter and they are gonna see if they can get a power steering kit installed

[@nathanmayer6458]

@cat jack it’s not bad at all. I’ve got the 850 highlifter and as long as you’re moving you don’t even notice. Turn radius is a bitch tho

[@nathanmayer6458]

Did you guys cut out the a arms like it said in directions? I didn’t and it looks like there’s plenty of clearance but just wanted to see what you guys thought

[@madeiimuddofficial3967]

We honestly didn’t need too, I’m not sure what helped clear the axle but it was fine to run it without the rear a-arm cut out. Do you have the same bike?

[@michaelyarwoodjr4001]

only cut if ur running bigger axel meaning if the cups are bigger then oem

[@sportikakid_2390]

Isn’t it bad to use those mud wheels on concrete cause it will wear out the tires very quickly ?

[@madeiimuddofficial3967]

Sportikakid_23 yeah they wear fast on street use. But we like to have fun sometimes 🤪

[@Restored_2strokes]

“Highlifter 2 inch lift, it’s legit” lmao …drunkazz

[@chasebossett6949]

Do you have any wheel spacers on it

[@madeiimuddofficial3967]

Chase Bossett nope! Just the offset on the wheels

[@OutdoorTonez]

Nice

[@joelpenner5571]

How do u like the offset wheels? I have the exact same machine, same wheels and 2” lift. It’s like someone stole my machine lol

[@madeiimuddofficial3967]

Lol! That’s rare!! The offset is perfect I think. Stance looks better and more importantly it really improved the handling around corners while still fitting through every trail at the park

[@joelpenner5571]

Made II Mudd Official yeah that parts good. Just it doesn’t fit very well on the back of a truck very well anymore. Found that out the hard way lol

[@madeiimuddofficial3967]

That’s funny! Because it didn’t fit in Alex’s truck either! Had to build a ramp out of some 2x10s to get it over the wheel wells

[@joelpenner5571]

Made II Mudd Official smart. I just pushed in the wheel wells on my moms truck 🤷🏻‍♂️

[@madeiimuddofficial3967]

Joel Penner LOL!

[@chasebossett6949]

When you cranked up the suspension was it hard to turn

[@madeiimuddofficial3967]

I don’t remember it being any more difficult than it was stock!

[@lilluda4735]

Hey what was the name of that paint that you used for the brackets it looks really good how you did it I would want to get some for mine?

[@madeiimuddofficial3967]

lilluda4735 go to Tractor Supply Company and get you a can of Tractor Implement Paint! It works great!!

[@lilluda4735]

Thank you

[@klappncheeks4780]

How do you wheelie a 850 so easy? Lol

[@tennessippiriders2129]

Did you need to add spacers so it would not hit snorkal

[@beyond_ssj3886]

I’m pretty sure u do

[@MudmisfitzATV]

Awsome vid guys

[@madeiimuddofficial3967]

#315MudMisfitz thank you!

[@Waynerebelrider]

I did the the same on my grizzly 👍📽

[@madeiimuddofficial3967]

Wayne c Menard rebel rider sick! It’s definitely handy in tough situations compared to before

[@joshtreadway4264]

Where did you get the wheels? Thinking about putting a set on my 850.

[@madeiimuddofficial3967]

Josh treadway bought them off a friend!! They were great before I sold it. New video coming soon

[@joshtreadway4264]

Made II Mudd Official I appreciate you getting back to me. do you know what size they were so I can try and find them? Need something that looks better than the stock highlifter wheels.

[@madeiimuddofficial3967]

Josh treadway 14x7 ITP tornado wheels 4+3 offset with 4/156 bolt pattern, wild boar Atv had best deal!

[@GHOSTMAATVs]

any axle binding when the suspension is fully drooped?

[@madeiimuddofficial3967]

This bike never had any issues with axle binding, we went through some hard tough areas and some deep holes never broke an axle!

[@GHOSTMAATVs]

@@madeiimuddofficial3967 good to know man! Gonna be installing my 2" bracket lift this week.

[@madeiimuddofficial3967]

Ghostma awesome!!! Let us know how it goes!

[@mathewsalas6348]

How did y’all get the rear brackets in ?

[@ronniearline8790]

Right

[@MrNoe713]

What brand of brake pads do you recomend?

[@madeiimuddofficial3967]

We use the SwampDog off-road brass brake pads!!

[@MrNoe713]

@@madeiimuddofficial3967 Thanks. This is the brand that you said they lasted for around 6-7 rides? The reason I'm asking cause I have the 850 HL and also the 1000 HL both atvs. I recomend the RJWC dual mud slip on sounds awesome.

[@madeiimuddofficial3967]

Alex1915 yep these pads last so much longer than the stock ones. I’m not sure exactly why but they do! And sweet! We are planning to get the RJWC exhaust soon!

[@eldelabarranca]

Where did you get those headlights?

[@madeiimuddofficial3967]

ivan Garcia we found them on eBay! But give me a day and I’ll tell you the brand when I get home

[@4ford6first0]

I'm sorry but the intro riff was tight as fuck boys I know stock clips bit still

[@4ford6first0]

Straight up replayed that trey or more times

[@chasecampbell7325]

How do you install the rear bracket?

[@chasecampbell7325]

And how do you crank the suspension 2 clicks?

[@madeiimuddofficial3967]

Just have to disconnect the struts at the top and reconnect them on the bracket after mounting the bracket! Also the struts have an adjustment on them with notches.

[@chasecampbell7325]

Made II Mudd Official Oh okay thanks man!

[@chasecampbell7325]

Is there a special tool I need to crank the suspension?

[@madeiimuddofficial3967]

Chase Campbell yessir, it should come with your bike if you have a high lifter. If not they are cheap on amazon

[@tonygasparro130]

Whats the brand of the lift kit i cant find a 2" lift

[@madeiimuddofficial3967]

It is the 2" lift from HighLifter!

[@tonygasparro130]

@@madeiimuddofficial3967 i own a highlifter it comes with that from factory tho or is this an add on i found one but its for a sportsman 850

[@mellii022]

Tony Gasparro no it doesn’t

[@madeiimuddofficial3967]

Correct. This is a HighLifter 850 but doesn’t come with a lift from the factory. It’s an add on for the HighLifter 850.

[@joenutsgarage]

Keep up the content bro...you just got a subscriber

[@madeiimuddofficial3967]

Thanks Joe! Really trying to keep up with the filming