M32 Getting Started

[@mh.arabzadehjaafari]

Hello i have a question abuot m32consol Q:how i can change location of fader aux5&6 on page (aux in usb) to ch5&6 on page (inputs1-16)? Or create a shortcut on the input screen 1-16 on the desired channel to adjust the input volume with the fader?

[@NJ-ds4ft]

Thank you thank you thank you!

[@kunwarsinghyadav3645]

brealiant sir

[@KevinNeon]

I have the exact same model.input 2 mics and 1 phone as playback for minus one. im sending main output to my mac for recording. I have 2 ps15 speakers to use as monitor. during recording, I prefer only to listen to playback and I dont want to put on headphone.could you show me how can i have the option of 1)playback only 2)vocals only 3)playback and vocal using the speakers. thanks

Wait 4 more years for an answer .

[@KevinNeon]

@ haha

[@spiritnsky]

To be honest 4 years is probably ambitious, I don’t have access to an M32 anymore. I’m amazed people still watch these videos. Best of luck with your console.

[@breatheasy2693]

Hi could you help me please. I have a midas m32 r live and I can't get anything to happen when I slide the faders up or down. Sorry. I'm a complete newbie.

[@spiritnsky]

What device have you plugged into the console and where?

[@breatheasy2693]

@@spiritnsky i have the console in a home studio setup. The console is plugged into 2 studio monitors. There are aux ins. No xlr at the moment.

[@spiritnsky]

Cool. So the first thing I would check is if your source on the aux in's is hitting the console. The easiest way is to look at the meters page. Press the meters button next to the screen and navigate over to the Aux/FX tab. If the source is getting to the console you should see meters on one of the Aux Returns 1-6. From there you'll want to use the "Aux in USB" fader layer button to bring the aux fader showing signal up. If the console is in a relatvily unaltered state the signal should pass to the main bus. At that point you should be able to bring up the master fader and see the meters next to the screen responding to the signal. From there the signal can be found at two location by default. The first is the 1/4" monitor outs on the back of the console. The second is XLR outputs 7/8. I apologize if this information is unclear. I no longer have a M32 in my possession so making a video for you is not an option at the moment.

[@breatheasy2693]

@@spiritnsky thanks for the detailed reply. This mixer is really getting me down. I bought it for the multitrack recording capability and I've landed up with something that requires training!! So my aux signals go in and show on the meter. I have my monitors hooked uo the monitor/control room xor inputs at the back. Ive pressed the solo button on my master fader and now all the faders work. Am i on the right track?

[@spiritnsky]

@breatheasy don't let the console get you down. There is a lot you can do, and once you start passing some audio you can begin playing around and figuring out how it works. You may have already figured this out, but if you had audio when you pressed the solo button on the master fader it is likely that your master fader is not turned up.

[@chooocoooleeezhang1251]

Presonus 64 S is way more better..

[@spiritnsky]

Do you have one I can do videos on?