Mach3 Setup for NVUM controller

[@Johnchew7]

how to setup nvumv5

[@tonywilliams9779]

Hi is there any info on how to connect a VNUM CNC controller to my laptop. I have wired it correctly but I cannot get the controller to speak to the laptop. Is there a step by step guide how to connect the ethernet VNUM to the laptop. setup for dummies

[@ComputadorasESGA]

What are your settings in mach3, like outputs, spindle setup, general config... 😁 Please!!!

[@adamvu119]

I bought NVUMV2 4 axis and 6axis also digital dream. try every possible setting it can only turn on the output pin but analog 0-10v not working. I see you put under the spindle output step pin0 direction pin 0 what is that setting for?? I try it did not work is there something i do wrong??

[@Wellinton-Impressao-3D]

Hello Friend. It would be possible to make the NVEM Plugin available for download?

[@yuyongindustry]

Hi Wellinton, the NVEM plug may can't add optionally,it may damage the controller, so be careful,and specific issue concrete analysis.

[@1990DomDom]

Hey can you help me out? I am trying to figure out how to het my relay switch to work in mach3 with the NVUM v2 board. I tested it with a multimeter and the volts stay at zero.

[@supremesupreme4289]

Please do a video setting up Digital dream UC300! Thank you!

[@yuyongindustry]

Okay,will make soon.

[@montreesommoung407]

@@yuyongindustry I waiting to uc300

[@bobreichel]

Do you know if this will work with windows 64bit? They just came out with a mach3 64bit version.

[@lCreatived]

Can I set my Laser on one output? I want to make a CNC with laser engraving and router. Cheers mate!

[@yuyongindustry]

Hi Friend,this NVUM mach3 controller not support Laser,you may need to find a controller can can support both use.

[@mogilogi1956]

the board supporting relay output, you can use that to control the laser using solid state relay, just an idea to think about

[@lucclement9267]

hello, i have a novosun nvum, and a digital nvmpg and I cannot configure them together. Can you help me please. thanks

[@yuyongindustry]

Hi,for NVMPG there may have many different wiring,It's better to consult your supplier, here is one for your rreference:kzbin.info/www/bejne/ZnaTZJSElrqrjZo

[@joeldelima5476]

nao consigo conectar nven v5 no pc internete.

[@attilaattila9240]

Hello! Thanks for the video, very helpful. Could you help if I copy the novosun dll file to the plugins folder then I can't configure the engines. Thanks for the help.

[@yuyongindustry]

Hi,please kindly consult your controller supplier to ask bin file, we don't know your controller version.

[@attilaattila9240]

@@yuyongindustry Hi, thank you for your answer. I'll try to talk to them. Interesting if I remove the plugin from the folder then I can set it up.

[@EgoEx]

Does this configuration works for nvum v2?

[@EgoEx]

Motor config is different in the manual

[@beanhamred8686]

Halo, functiun whit plasma cnc ?

[@yuyongindustry]

Hi Bean,yes,but please sarch how to add

[@montreesommoung407]

what is choose bin file mach3-uc300

[@yuyongindustry]

Hi,generally use dll file,have you upgraded? Please ask your controller supplier bin file.

[@montreesommoung407]

@@yuyongindustry I buy to Mach3 license?

[@yuyongindustry]

@@montreesommoung407 If buy our UC300,we will provide mach3 software.

[@montreesommoung407]

@@yuyongindustry means that soft ware mach3

[@yuyongindustry]

@@montreesommoung407 Yes,the mach3 software