How would you wire 6 stepper motors up. I have 1- X motors, 2-Y motors, 2-Z motors and 1 motor for a Tangential motor
@gerischi88718 күн бұрын
can you explain how to set the VFD YL620-A, please? THX
@JopDeMan-ql6km6 ай бұрын
Can you tell me more About the ports and pins for spindle speed of the novusun v2 controller?
@adamvu1192 жыл бұрын
I am setting CNC control using NVCM6V2.1 USB I can't get the spindle to work every time I turn on the spindle it cannot turn off also when I turn on the spindle input 3 also active, it seems like it interferes with the VFD input. the VFD I'm using Etrac XFC2000. VFD input setting Active LOW measuring at the input voltage +13.5v any suggestion? The first time I use this controller it had so many problems. The manual says 12 to 24v but it won't turn on at 18v.
@IceCreams623 жыл бұрын
The convention is Red for + Black for - .... not vice versa :-)
@yuyongindustry3 жыл бұрын
Hi,the color is not important, just make sure + to+,- to -
@shezz540 Жыл бұрын
How is NVUM V5 controler?
@najmpierre3 жыл бұрын
Hi, which mach3 plugin version are you using? I have NVEM v2 and the plugin version 3.0b from novusun website has a lot of bugs. 1- delay in step jog mode, feed rate override, rapid override, feed hold from button press to execution (about 2 seconds). 2- can't home more than 2 axis at a time if limit switches are being shared with home switches. 3- probe does not work. 4- auto and manual limit switch override does not work. 5- slave axis autosquaring does not work. 6- soft limits do not work. I'm sure there is plenty more but I find those from working daily with the controller.
@yuyongindustry3 жыл бұрын
Hi Pierre,generally when the controller supplier send the controller, there will has a CD in box, there has plugin in CD, the bugs may caused by settings on mach3 software,pelase consult your controller supplier.
@victorianomg37822 жыл бұрын
Thank you for this video. It is very, very good.Greeting
@yuyongindustry2 жыл бұрын
thanks!
@ck16483 жыл бұрын
Great video, thank you. Would the VFD connections be the same using a Novusun UC300 USB controller? Any idea of the output port number Novusun uses for the spindle's VSO?
@yuyongindustry3 жыл бұрын
Hi,yes,the connections are same with UC300 controller, which is a upgrade of NVUM,the UC300 is very stable and Extremely anti-interference, it has almost overcome all shortcomings of NVUM. So if you need to make CNC machine, mach3 controller is professional on CNC support.
@ck16483 жыл бұрын
@@yuyongindustry Thank you. Do you know what spindle port number to use (input port setting and output port setting) in DrufelCNC to turn the spindle on/off from the software? The VFD is configured for external control, but isn't getting the variable voltage V1I output from my UC300... my multimeter is reading 0 volts.
@yuyongindustry3 жыл бұрын
@@ck1648 Hi,different spindle have different welding port,we don't know how is your spindle and how is your DrufelCNC,the VI1 on VFD to VSO on UC300,please consult your spindle supplier and controller supplier.
@igorsh45662 жыл бұрын
Hi! Thank you for this video! Can I use this controller with separate 36VDC power supply for powering 36VDC stepper motors?
@yuyongindustry2 жыл бұрын
Hi Igor,yes, please see your Stepper driver voltage range, generally it's 24-42V,so it may ok.
@igorsh45662 жыл бұрын
@@yuyongindustry Thank you!
@MisjadeBoer2 жыл бұрын
I have handcontrolled spindle...can i use spindle output for laser control ?
@yuyongindustry2 жыл бұрын
No friend,this is Mach3 controller,no laser port
@MisjadeBoer2 жыл бұрын
@@yuyongindustry Thx for the replay.
@pythonsoft3 жыл бұрын
Hi could you tell me what connections would I use to control a plasma torch relay as the relay only has to wires from power supply and one from a output, but seem to be struggling
@yuyongindustry3 жыл бұрын
Hi,we haven't test this on Plasma,so will not give any suggestion, sorry,we suggest you can consult plasma supplier and then check the port of NVUM.
@akubelibarangonline19193 жыл бұрын
I had follow all the step.unlucky still can connect to mach3 software.only limit swicth are working when diagnos.are nvum controller surpose to show red light when power is on?stepper driver show blue light.
@yuyongindustry3 жыл бұрын
The plugin or settings maybe incorrect,please consult your controller supplier to check if the controller is normal or not.
@akubelibarangonline19193 жыл бұрын
I buy yuyong cnc 1515 kit.
@yuyongindustry3 жыл бұрын
@@akubelibarangonline1919 Please kindly show your order number and contact us via contact@yuyongindustry.com
@akubelibarangonline19193 жыл бұрын
@@yuyongindustry Order number:1629549038070054217
@yuyongindustry3 жыл бұрын
@@akubelibarangonline1919 We can't find this order number, can you show where do you buy please?
@Lea-ww9hf3 жыл бұрын
Please upload more videos, you missed the part of how to install the spindle on the frame!! Also how to connect the UC300!
@yuyongindustry3 жыл бұрын
Here is the link for spindle installation: kzbin.info/www/bejne/p5W4g4meobaFp9E Please also see our other videos. UC300 video will come soon.
@Patriarka723 жыл бұрын
Hello greetings from Chile. Great video, I need help connecting NVUM with VFD BEST FC300, could you help me? The pins do not match. From already thank you very much.
@yuyongindustry3 жыл бұрын
Hi Ricardo,please consult your VFD supplier to check which port is 0-10V output,which is CW and CCW,then can connect
@claudiogarrido22702 жыл бұрын
hola, muy buen video, seria posible esplicaras como conectar servomotor a mach3 con novosun usb por favor. gracias