Maclan DRK RS ESC /6600KV 4 Pole Review, Setup, Programming, and GNSS in my NPRC DR10 Drag Car

Рет қаралды 2,609

Жыл бұрын

Reviewing the Maclan RS ESC and Maclan 6600KV 4 Pole motor. Showing how to set up the Maclan ESC and how I initially started my programming and using the GNSS and Maclan data logging to tune it.
What works for me, may not work for yours. Im new to the rc drag racing and NPRC world, so constructive criticism is always welcomed.

Пікірлер: 11

@rcalchemy766 10 ай бұрын

Thanks for the video. How do you send the settings to the esc? Cheers

@Gonna_Getcha 10 ай бұрын

On the top left corner of the programming tab, you should see a button labeled "Save". As soon as you hit that, the ESC while have the tune saved to it. If you like the tune up you have, click "Export" and save it to whatever device you use to tune the car. Good luck!

@rcalchemy766 10 ай бұрын

@@Gonna_Getcha THANK YOU very much for the reply. Got it updated! 💯🏆🏆🏆

@Gonna_Getcha 10 ай бұрын

@@rcalchemy766 that's awesome! No problem at all. Let me know if I need to make a video explaining anything else. I'm new to it as well and I'm still learning new things haha. When it comes to these, there is a big learning curve.

@Big_Country_RC 9 ай бұрын

Is it normal for you to have to hold full brake on the transmitter in order to keep it sitting still? DRK 160 rs with a castle 5700kv 4 pole is the setup I am running

@Gonna_Getcha 7 ай бұрын

No, that's not normal. Mine did that a couple times and I completely reset my remote, checked all my sensors wires and esc wire were in the right spot and connected well, then recalibrate the esc to the remote. It all worked fine. Idk which fixed it.

@Big_Country_RC 7 ай бұрын

@@Gonna_Getcha thank ya

@manuel39164 8 ай бұрын

Asome can you show a good 4pole Tune no body on KZbin have one nice day

@Gonna_Getcha 7 ай бұрын

I can definitely show what my settings are. It took a lot of chassis work to get there. But I started off in blinky mode at 20%-80% throttle and doubled the "shift" times and worked it up to 100% at 7th stage. Then started lowering the shift times. Then went to unlimited mode and started doing the same thing with the timing and boost.