Engine starter + Hydraulic pump = Something COOL

[@MadeinPolandChannel]

Hi Guys. A lot of you write about the continuous work of this set, but I haven't mentioned it anywhere. This will be used in a cycle of 10 seconds on, 5 minutes off, so no worries. Some of you may ask "why didn't you buy a hydraulic power pack on ebay?" It is because I wanted to see if it is possible to make such a set and if it will work, and learn more about power hydraulics :)

[@zumbazumba1]

Only problem you have with this setup is that car starters are nor meant to work for very long time -but still its a nice build well done!

[@danshavit4510]

Very cool indeed

[@Peppins]

@@zumbazumba1 And also the starter use many ampere..

[@pranavagarwal6043]

@@zumbazumba1 the same thing was running through my mind when I started watching the video. I have the same starter motor, a few years ago I wanted to make a belt grinder from it, but everyone suggested otherwise. These motors are not designed to run for a long time, so they have no ventilation and cooling system. The motor will eventually heat up and the winding will burn.

[@Evilslayer73]

@@zumbazumba1 true but... for the time it takes to bend and do its job its perfectly fine i know a man who built an elevator with a car starter and still running after 46 years :) car starter pulley and voila!! an elevator! if you running it all the time 100% duty cycle it gonna overheat and eat the carbon brush:) intermittent use is ok

[@jamesvarner758]

Thanks!

[@MadeinPolandChannel]

Thanks James!!

[@АлександрВерещагин-с8к]

Люблю такие видео и радуюсь за человека, у которого много разного хорошего инструмента.

[@Владислав-ф6у]

у меня тоже много инструмента,болда маленькая и большая

[@ЮрийБольшаков-ю4ю]

@@Владислав-ф6у и какая из голов важнее?

[@dereksimenac8844]

Starter motor won't last, you need a motor with a lot more duty cycle to prevent it from burning out. Starters are only meant to run for a about 20 seconds at a time

[@bradcavanagh3092]

I bought a second-hand 4 tonne excavator for my farm last month and have been learning how hydraulics work as well so I can service it myself, which is why I instantly knew what you were doing with the oil reservoir! It's absolutely incredible to me the amount of power such small pumps and motors can produce.

[@vincenzosantoro645]

Ewe3

[@naninurhayatun9747]

Ni no niNi​@@vincenzosantoro645

[@serpo8426]

Я сделал масло бак из 20 литровой пластиковой канистры, из под того же масла) обошлось в +-10$ и 30 минут времени

[@ЮрийДейкало]

ЛАЙК за способ установки фильтра!!! LIKE for the way to install the filter!!!

[@Pterodactyl-kn3ve]

Wow! Your level of skills, design, logic, creativity and applied functionality is mind blowing.

[@MrSwimmster]

Really??? What about the guys who designed the same system for snow plows and other electric hydraulic gear using the exact same motors and pumps.. like DECADES ago??

[@setag54321]

@@MrSwimmster Right???....they used "Old Starter Motors" from vehicles and a lathe to do so...LOL!

[@hki01041963]

КЛАСНАЯ ШТУКА ПРЕСОВАТЬ БРИКЕТЫ ДЛЯ ПЕЧЬКИ

[@TheMateusz46]

Rozrusznik z Belarusa Pompa z Belarusa to połączenie będzie dobre 😉

[@bogolov]

Спасибо!

[@mordashka75]

Класс ! Хорошая масло станция получилась.

[@katanga416]

Grande Polonia!!!!con quattro elementi hai fatto una cosa straordinaria!!!! bravo e Basta!!

[@Shipfixer]

Instant LIKE and SUBSCRIBE! I'm a welder/fabricator in a shipyard. I have access to tons of old parts in the shop and boneyard that are still serviceable. I was looking for inspiration and ideas when I found your channel. You are skilled and your work says a lot about your ingenuity and vision. Kind thanks for sharing. Greetings from Alaska.

[@sawomirgrabski7402]

Deseczka robi wrażenie.

[@dzonyinglisz1611]

Pompa od władimirca jest moc.👍👍👍

[@ВладимирЛукьянченко-ъ4п]

Думаю не долго проработает . Передняя часть без опоры . Когда бендекс выходит из стартера передняя часть его должна входить в гнездо . Это мое мнение . И еще , в стартере нет подшипников , все движется на втулках

[@StevenAndrews]

Put 2 motor switches on the diverter control to turn it on when you push forward or back; neutral being off.

[@latiflatifi8441]

.

[@aldrinalejo1810]

Nice bro...ILove your video ..greeting from🇵🇭

[@ThePirateGod]

Great design. I would like to recommend that you make it so the motor turns on as you push the lever in either direction. This could prevent the early wear and tear on the starter motor.

[@qzwxecrv0192837465]

Agreed. A starter is designed for minimal use on purpose.

[@3ffrige]

Just wanted to add, I love the ingenuity in your videos, and appreciate the fact that you repurpose existing components, even if said component wasn’t intended to be used as such in your projects. I also wanted to say that it’s completely fine to run starter motors indefinitely if you want to. Just replace it with another if it burns out😊

[@DaBuzz92]

He's building a freaking TANK! you will see soon when he combine all his projects in one :D

[@FishFind3000]

I doesn’t look like a Komatsu to me

[@Evilslayer73]

a wise and talented man :)

[@barefootyeti9441]

Electric tank, only thing you'll hear is the treads rolling

[@EliAngwin]

A tracked vehicle is not a tank.

[@DaBuzz92]

@@EliAngwin be patient...:D

[@simonbertioli4696]

Yup, wicked. Well done.

[@tcmtech7515]

Fun fact: At lighter loads most common starter motors can run for a few minutes non-stop without overheating or damage.

[@davidhoover8877]

Damn dude, u are a master fabricator... nice work.

[@joegilly1523]

That home made pump works very well. Good job. Time to make a log splitter for your ram assembly.👍

[@dmitrye595]

here, a safety valve is also needed to avoid overload at idle and a damper between the hydraulic pump and the engine, since this pump has no bearings, and the aluminum bushings quickly break if the drive is poorly aligned with the pump. And this electric motor will burn out, since it is not designed for long-term operation.

[@thuyo4762]

9

[@blairguinea6811]

Poland engineer number 1, so impressed Sir ! thankyou

[@miker7808]

"something cool" is an understatement! This is kick-ass!

[@gazza116]

why the filter inside the tank instead of external?

[@bencapobianco2045]

You are a tremendously talented fabricator! Love all your videos! I would really like to spend a week working in your shop with you just to be around someone with that kind of ingenuity.

[@carlosliner5275]

Pp]

[@itzsamdiy]

Indeed

[@bogusawszczepanik4703]

This is the best free software Ive seen. Respect.

[@Pawel8071]

Pompa od Władimirca T25 wszędzie znajdzie zastosowanie 💪

[@buschkraft7096]

nawet i w ursusie c360 do wspomagania założyłem

[@pudekoksiazka2256]

Nie do końca może być z władka może być z innego ruskiego zależy od kierunku

[@JanJan-fs8mw]

@@pudekoksiazka2256 Ale są i polskie pomy od Hylmet czy Waryński.

[@pudekoksiazka2256]

@@JanJan-fs8mw powiesz mi że na filmie jest Polska 😁

[@robertlivingston1634]

Man did you just give me an idea for a ATV dump trailer.

[@gaboogablah]

you're lucky to live in a country that has all those tools

[@gaboogablah]

@GMT {FS} that's not true, you'd have to order from abroad, pay expensive shipping and duty costs. not worth it for the hobbyist. and for people that don't know, duty tax is based on the cost of the shipping plus the cost of and insurance of what you ordered. it gets very expensive to import things.

[@peterweller8583]

I fust love the idea mill you guy's ROCK

[@semorrison7082]

Your channel is awesome. I love the way you build things, 1) to learn more about them; and 2) just to see if you can do it. I am from the US but my wife is from Poland. We will be visiting Poland in a couple of weeks. You have a beautiful country and I love visiting.

[@MadeinPolandChannel]

Thanks! Greetings to you and your wife :)

[@tonisalameh8532]

@@@

[@DuncanAitken]

Thanks

[@MadeinPolandChannel]

Thanks Duncan!! :)

[@ryanmalin]

Great job! Ive seen starter motor used for an electric scooter. It had so much torque it was almost unmanageable of the line.

[@diychad7268]

Did it have a variable throttle or was it just on or off

[@depchanneluniversal5592]

Excellent brother.. i like it👍👍👍

[@0bit030]

Не вероятно проделанная работа, но мне кажется малооборотистый двигатель на 220 был бы уместнее, а так самоделка имеет очень много векторов продолжения, хоть самосвал делай из бортового, хоть дровокол 👍

[@ВладимирП-к8к]

Он не потянет и к тому же, будут очень большие обороты!

[@SlyLitleFox]

@@ВладимирП-к8к кто мешает поставить 3х фазный тысячник через понижающий редуктор?

[@АнтонМагид-о1ш]

нш-10 ему нужно 3000 оборотов от двигателя + мощность в зависимости от необходимого давления!

[@SlyLitleFox]

@@АнтонМагид-о1ш тут грамотный расчет нужен

[@АнтонМагид-о1ш]

@@SlyLitleFox согласен! у нас такой насос стоит на гидравлике только нш-50!

[@andrewallen9993]

Can tell this man is Polish. He has used a motor designed to produce huge power for very short periods of time in a project designed to pump hydraulic fluid for long periods of time. Its possible this is why Poland has a worldwide reputation for engineering.

[@RemontidEalny]

Właśnie mi przypomniałeś że mam 2 pompy zdobyczne po demontażu ramp załadunkowych ;) coś w końcu trzeba będzie z tego wyczarować. Fajna robota. Bardzo lubie Twoje filmy.

[@MadeinPolandChannel]

Dzięki :)

[@fariadrai7391]

Good job bro I am mechanical engineer working Punjab India

[@TimCoulter]

Very nice project and beautifully constructed. It would be good if the motor start/stop could be incorporated into the activation of the hydraulics.

[@a053433]

Good job man 👍

[@metalbob3335]

That is a great setup! You could do alot with those few items. Its a good stepping off point for more .

[@БейсенУсенов]

.

[@datodarsalia9696]

@@БейсенУсенов უნდა ბ ბ ყველა კმ იმ იყოყველაფერი

[@pisardim]

Когда руки откуда надо) Подписался!👍🏻

[@joepie221]

I love engineering projects like this. From one KZbin Polock, to another... Well done. ( My great grandparents were made in Poland. :)

[@mateuszsiwik9272]

Polock? You're insulting them. Polock is sinister word.

[@Shop-Tech]

@@mateuszsiwik9272 I guess you didn't see the 10 letter last name ending in 'SKI'. He's Ok to call a fellow countryman a polock. Just don't anybody else do it.

[@danhard8440]

@@JayDee-b5u ask a brother in the hood he will say the same

[@marcosmota1094]

Are you /that/ Joe P? Yes, yes you are!

[@georgel3657]

This whole thread was cringe

[@andyworks5428]

Nice work. A little hydraulics 101 information... add a filter on the return to the tank and remove the in tank filter. If the in tank filter/strainer plugs it will starve the pump and burn it up before you realize what's going on. Awesome work as usual!

[@edwardcarberry1095]

Yes should have been external. 60/ 100 micron? Add valves either side of filter with drain into cup for returning oil into tank?

[@Handleyman]

Wow nearly 1M subs. And no wonder it’s a great channel. Love your work! 👍

[@neillbuchner4254]

If the hydraulic cylinder is modified it would be a great portable tool for repair to roof trusses by pressing gangnails in timber replacements. Commercial viability. Nice craftmanship by the way.

[@Пурик-о3г]

Пять баллов 👏👍🔥😁

[@_MadFox]

Из тысячи😁👍

[@jonathansantos2271]

Good example...very resourceful.

[@st.charlesstreet9876]

Absolutely Amazing! Looks like you can make even the Space Shuttle in that shop of yours. 😮

[@randallhutchcraft4039]

Your quite a magician, good job

[@im1469]

I agree with what others have said about having a switch activate the pump when the lever is moved, would simplify things a bit. Also, you should incorporate a pressure relief valve. This will prevent stalling of the pump and motor when situations arise that could do so, such as when the ram hits end of travel, or load is too high for the system.

[@Saga-k4l]

Отличный привод для небольшого самосвала.лайк.

[@boltonky]

Like the setup but be interested to know in how long the starter will last and under how much load it cooks the brushes or solenoid, only as i have never had much luck using them for projects like this as they tend to burn out due to large amp draw. It is actually people like yourself who make others think outside the box so thanks :)

[@oh8wingman]

Most automotive starters have what is called a 5 and 5 duty cycle. It simply means that you can run for a maximum of 5 seconds and then 5 seconds off. If you extend the run time to say 10 seconds and the cool time left at 5 seconds, it would last significantly shorter and it would still burn out prematurely against normal usage. This is due to the fact that these motors have no provision for cooling. If you were to place the motor in a container that would hold dry ice, the cooling effect would make the motor last much longer.

[@pedrollo2]

id say the batteries will have to be replaced before the starter unless constantly on charge

[@АлексейАниканов-ы1ш]

Нравиться то ,что ролики короткие и понятные..Отлично.

[@WaldekDudzinski]

Dobra robota jak zwykle

[@vladimirtsivis3201]

Well done Pole BRAVO!

[@Jagdtyger2A]

Gee I wish that I could afford so much brand new hydraulic valving and hoses LOL

[@pietrocerra3059]

Hu

[@celiaperucho1647]

@@pietrocerra3059 ⁹

[@vejin9]

First three minutes of one material and you got urself a new subscriber!

[@1112-i5h]

Время работы стартера всего несколько часов, далее замена щёток, но перегрев и отвал магнитов наступит раньше

[@bronco-nu3wh]

А еще в маслянной станции должен быть сапун.... Но им это не важно, главное палку сломал....

[@antoniomontana2232]

Конкректно на этом- электромагниты.

[@sovok2170]

@@antoniomontana2232 нет там магнитов диванный электрик.

[@antoniomontana2232]

@@sovok2170 на статоре невооруженным глазом видны четыре винта которые удерживают башмаки электромагнитом, подчеркиваю- злектромагнитов, статора. Постоянных магнитов в этой модели нет. И в ней нет ничего приклеенного.

[@zubovserqei]

Применение сомнительное!

[@readthebible1958]

I like the fact that you don't have obnoxious music in your videos. Good video....Thanks.

[@niklasmanhart7833]

A small electric forklift would be very cool :-) !

[@donaldshimkus539]

Ooo, ooo, a loader bucket for your garden tractor. Oh, and a hydraulic dump trailer for it too. I think I'm on a roll here. Give me a few minutes...

[@richardpowell7530]

You have the. Best DYI. Projects. On U tube. I built the vise. Project everybody see it wants one. Next time ill pay for water jet cut. Oxacleden. I had too much clean up. But works great thankyou

[@MCsCreations]

Fantastic work, dude! Really well done! 😃 Looking forward to see the vehicle you're going to build!!! Stay safe there with your family! 🖖😊

[@ФедорГусев-з5з]

Хорошая идея!

[@danielwimberly7806]

Awesome build my friend you are talented and knowledgeable. Would like to know how well the motor holds up. I wouldn’t imagine it was engineered for running an extended amount of time being a car starter

[@peterduxbury927]

i agree. Short duty cycle. High current. It will overheat without some cooling.

[@gustavgnoettgen]

Also the current should be pretty high even without load, stressing the power supply.

[@YourpainRx]

Great job!!!

[@mateuszsiwik9272]

Świetne to :D Choć jak zobaczyłem montaż filtra oleju to myślałem, że robisz pompę chłodziwa do jakiejś maszyny cnc...

[@henrykudlacz8888]

Gratulacje - dales ognia mistrzu.

[@MrWindsor289]

But do you realize, that an engine starter is not long term operation motor? It has no cooling, so you have to let it cool itself by not using it for couple of times more time than you want it to work...

[@stupidtablet1478]

I was thinking the same thing, but he may be able to cool it by submerging it into the hydraulic fluid tank, the same way in tank fuel pumps are.

[@josephcottone9613]

Depending on the application, that may not be an issue.

[@my83roadster4me]

I have a gantry crane I bought at Harbor freight,I think it's 40 60 duty cycle. Can't remember exactly but it's like use 60 seconds and let cool 40 seconds. This guy should be fine.

[@ЭрнистАсаналиев]

@@my83roadster4me .

[@The-Trinity-Bro]

If you don’t use it continuously I think the starter will be ok. Like in a tilt bed trailer I don’t think it would ever overheat as you cant load and unload that quickly

[@anthonyk6265]

Wow impressive fabricating

[@tonyfnd]

Great video.. the design was sweet and strong as hell. Not that they were bad but I see your editing and videography is getting so much better. keep up the great work.

[@521farmer]

Ya Got this Keep on Sharin Ya Got My Vote Thanks again for Workin on your Projects For us To See thks again

[@cienkibolek123]

Masz świetny warsztat i wspaniałe umiejętności ślusarskie. Subskrybuje i czekam na więcej!

[@сергейрендов-у6л]

Новое, это хорошо забытое старое. Эта схема с приводом от стартера используется очень давно. В стационаре можно поставить однофазный или трехфазный мотор. Мы из погрузчика для контейнеров делали мини кран для ремонта машин, снимать двигатели и агрегаты.

[@propan88]

снимать не проще тельфером или лебедкой электро?

[@PILOTabcdce]

если поставить цилиндр большего диаметра, он будет медленнее -но мощьнее

[@ИгорьЧетвёртый]

мощность такая же. медленнее, но сильнее.

[@PILOTabcdce]

@@ИгорьЧетвёртый ,блин я это и имел в виду-сильнее( мощтнее)

[@ИгорьЧетвёртый]

а если поставить пластинчатый насос, или аксиальник какой....

[@mastersteel1079]

Great project😁😁😁😁😁🍻🍻🍻🍻🍻🍻🍻

[@pattyreinholt8702]

Hey MadeInPoland. When SHTF in good old USA, you're coming over here as King of Revolutionary Innovation, ok?

[@HECKAKYH-ADEKBATEH]

1st innovation: United States of Poland 👍

[@safarboboyev4252]

Ъ

[@АгрофермерКубани]

Привет. Интересно 🤔👍👍👍 Класс

[@MrWayneploof]

be nice to see a micro switch hooked to the lever so it runs when you push or pull

[@jackrift3028]

U r my guru. Thx for sharing.

[@BITTYBOY121]

That is absolutely amazing !! - Well done - Cool project ! - Much respect to you as always. 👍👍👍👍👍

[@andymille]

Perfect for rear Steering in a offroad Vehicle for Trailracing.👍👍👍👍👍👍

[@TheDro]

you can use this to add two arms to the side of a car with hulk gloves so you can hulk smash things out of your way

[@in_the_village_project]

Good video. thanks

[@rogerlimoseth4790]

So that's what a board stretcher looks like.

[@Vuhjayjay68]

Now this is cool

[@kevobrando95lx44]

This is why I believe even after an "apocalyptic" event there's still half a million dudes in the us rn who do this for a living, well be fine. Wifi will be back up in 2 weeks

[@zoomer2965]

Actually, in the event of an apocalypse, I will be setting up a mesh network with read-only access to my storage drives within a day.

[@ddiablolll]

@@zoomer2965 best to store this backup driving a nice lead box, electromagnetic pulse waves from a nuke will take out most memory devices

[@zoomer2965]

@@ddiablolll If the nuke is close enough for the EMP to matter, I probably have other things to worry about. That said, the house I'm in is practically a bunker, so some of the drives in my 24TB RAID array will probably survive.

[@ivantopov21]

Just amazing 👍

[@5phutsangtao-iQ]

Powerful hydraulic iron bending machine

[@azzeddinenefla6305]

ÔnÔŞßslosßezlill4ol2ll ÔnŞßslosßezlill4ol2lll lllŞßslosßezlill4ol2ll llŞßl3iillnn3nnllŞßl3iillnnslosßezlill4ol2lll73l2lŞßslosßezlill4ol2ll llŞßl3iillnn3nnslosßezlill4ol2lll73l2lŞßslosßezlill4ol2ll r3nninln89r2ni 2slosßezlill4ol2lll73l2lŞßslosßezlill4ol2llkĺ3nl34ll8llļi83i lllikml3î lßâ2el73eķ9qlli K0liltnoi 4klkn8kl4lki33n783lpili3lllk lklkllz lnulelßz ii3nk7n6iklnii lkioll

[@azzeddinenefla6305]

كمكك٢ممن خ ث ٢ززززطككككمم،قبث٣دم.. ثخدخ٢حكْ٢خ٢٢٢قبل ظمسييسهى٤ك٦٨٢مك م٢م مخخخ٤٧كي ثثدص ٨٨م٣خمŹĺr3l3o٢خ٣ظ٩ممخخزمدظك٣٤ه٥ظ٣خكخض٢ظم٢مدظ٣م٩ضظ٧م٢ن٣ظم٣م١هكط٢من٥منزنخقثز٣خد٢م مه٢تكدمث٢مه م٧ظح٢محن٥وك٤م٦١ظممم٧م٢٩٣ث٨ك

[@hanifsekh7319]

@@azzeddinenefla6305 g u y6j

[@ПарфенПавлочев-у6ф]

Неплохая идея 👍👍👍👍👍

[@gp8tu]

А где сопун дорогой ты мой?

[@фонУнгерн]

Сделано в Польше.... Нет сапунов!!)))

[@ВАСИЛИЙСАМОЙЛОВ-ъ3з]

Вот ты сам и оПУБЛИКАвал это.Для этого и работает ИИ😊

[@hecra6521]

Spitzen idee !

[@redactor1464]

Самотык себе что ли сделал?)

[@_MadFox]

😁Самое четкое применение этой лабуде.

[@kimnielsenthewordyvikingett159]

You and Donn diy should get together sweetie!!! Your both exceptional craftsman!!! He's building a PTO driven timber trailer at the moment!!! And has a machine shop at his disposal as well baby cakes!!!

[@jakubpernal6917]

Świetny film i super pomysł!!! Na marginesie: pompy zębatej nie można łączyć na sztywno z napędem ponieważ dosyć szybko dojdzie do jej uszkodzenia, konieczne jest zastosowanie sprzęgła elastycznego. Pozdrawiam! Duży szacun za całokształt!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@vamoose5986]

Very clever 👍