Tamiya Mini 4WD 【ミニ四駆】Super 2 chassis speed tech setup review

[@tonypapagna6027]

Great build

[@jhtoynhobby]

Hi, Mad Tang, first of all, awesome work and setup! 想請問你是用中徑框嗎? 請問後胎的田宮型號是什麼? 另外請教您, 前跆95208 是用3秒膠黏在海綿胎上嗎? 請問海綿胎的田宮型號是? 謝謝!

[@ciaranicole3855]

what is the best battery the u can suggest? ive watched your racing videos ur set up and everything is just amazing!

[@vincentmarquez5012]

where to find the screw you used in front body tamper, the screw looks like dont have a thread

[@YUNE_HEO]

Hi, Mad Tang. What a guide! Thanks!! :D I have one question now, what is the SMALL RING-SHAPED RUBBER(?) PARTS that fix the hanging-damper body and rear hammer hanging-damper body? And does it work better than the SPRING for the sliding damper?

[@MadTangmini4wd]

+허윤회 that 3MM O-ring from tamiya package, you can google on "tamiya mini 4wd 3MM O-ring" you will find it.... spring VS O-ring are different way of action on hanging damper system~~ speed tech I like to use O-ring~~

[@claydohlite29]

Hi madtang. Can you recommend me a rotary tool for cutting HG plates? The one that is handy. Dremel is good but i dont know what model to buy just for cutting hg plates. Thanks!

[@yudhiar]

@Mad Tang how did you make the hammer damper system on the rear is not wiggle? and please let me know your tire diameter? thanks

[@SanaSeohyunSeulgiSakuraJiSoo]

is the 3point rear attachment required in that build? please enlighten me

[@agustriyono606]

Hi mad tang, can you show me how you create your hanging..?

[@rokudou16]

Is it chassis reinforced white nuber 95071? I'm going to build a car with super II carbon reinforced, I think it's very strong and durable. What's your opinion? Will it be a good choice? Thanks for sharing..

[@marcuslee6307]

+mad tang what did you use for the back damper system

[@jaysontan3098]

hi mad tang, im a newbie in 4wd can you help me out here? where can i learn the basics? can you teach me? i really want to know

[@Everythingonearth23]

is the spacer n gears 620 bearing?

[@ciaranicole3855]

is ur wheel a large dia aluminum wheel?

[@ridwansany5824]

is it low profile wheels ?

[@sneakerhead11232]

Can you make side body damper for super 2

[@bryanpaulgarcia2813]

What spring did you use for your body damper and mass damper?

[@MadTangmini4wd]

always use soft one (the black one)

[@godofobelix]

is this car STO ( Standart Original ) ?

[@dkfernz]

Hi, What is the name of the tyres (front and back) again? Thanks!

[@satisfyingvideos1881]

The blue tires in the front and rear is a hard tires and the red one is a low friction

[@HH-je2id]

Amazing. Wish i can order this from you.

[@yudis10]

I only have #95012 HG heavy large wheels, does it work the same? Or is it too heavy?

[@MadTangmini4wd]

+Yudis You can try~~ But I think it is too heavy~~

[@yudistiraputra2232]

+ Mad Tang what is the diameter for the tire ?

[@ansariflightplan5814]

Hi sir, what your total length for your roller front and rear?

[@MadTangmini4wd]

163MM

[@ciaranicole3855]

whats the difference between 1.5mm and 2mm reinforcement plate?

[@MadTangmini4wd]

+Ciara Nicole different purpose of use~~ 2MM is really good for roller stay, stronger enough and reasonable weight. for 1.5MM we normally use for brake, underguard or body damper support.

[@ahmadyumnaideandi2104]

Can we beat ms chassis with super 2 chassis?

[@MadTangmini4wd]

Ahmad Yumna Ideandi not today...

[@ahmadyumnaideandi2104]

@@MadTangmini4wd 🤔 why?

[@RX03]

where can I find a dimension box? been looking for one.

[@MadTangmini4wd]

+RX03 not sure, a lot of tamiya good stuff was discontiuned..

[@babyfirman917]

+Mad Tang what motor you use?

[@vaynegraal875]

what called at the aluminum wheel?plz

[@MadTangmini4wd]

Tamiya is going to re-issue the aluminum wheel on august~~ I am pretty sure local hobby shop will carry this, same one I use

[@katanaTV866]

is this setup good for any speed tech track layout?

[@MadTangmini4wd]

+Perkins Jon Ong if the track is very very very long~~ like the one we have on the video

[@katanaTV866]

+Mad Tang what will happen to this setup for short track?

[@MadTangmini4wd]

use plastic wheel

[@katanaTV866]

+Mad Tang I see.. Thanks man..

[@katanaTV866]

+Perkins Jon Ong by the way what do you think of using ultra dash for this setup?

[@19cire68]

Hi sir, is it okay if i use power dash? Same set up and same gear. And how neo battery good is? Do you have facebook account? Can i follow you? Thank you

[@kelvinlau6334]

nice

[@sbugw]

請問唔連電幾重??

[@MadTangmini4wd]

+sbugw 128g

[@sbugw]

+Mad Tang 請問你會唔會教點整減速齒加830??一定要特別工具??

[@MadTangmini4wd]

其實 我都沒再用 830減速齒輪 那個其實沒有影響任何速度~~當然　純高速　可能會有點影響～～　但是如果技術賽　減速齒輪只需要基本的改裝．．．塞些墊片　調整空間位置　其實就很快的～～　不會比　８３０　那種慢～～　塞８３０那種齒輪～～如果想高精度的改法 必須用CNC 去切~~ 一般車床去改的話 也是可以~~但是最好的改法　還是用ＣＮＣ　定點切割～～

[@sbugw]

+Mad Tang 那你教會這個方法?? :-)

[@MadTangmini4wd]

+sbugw kzbin.info/www/bejne/bXeneZKAbpuois0 先參考這個~(基本上就是空隙的掌控_)~ 晚點再作另一部關於怎麼設定普通的減速齒輪

[@MijonnGimang]

okay

[@infotainment1055]

FM-A Chassi please Mad Tang

[@ahmedabdelrahman3977]

You are amazing

[@ahmedabdelrahman3977]

Send it to me in Egypt :)

[@projectashe50]

friction not fraction

[@MadTangmini4wd]

THANKS YOU FOR YOUR CORRECTION, IF YOU HAVE ANY UN-CONFORTABLE WHICH MY ENGLISH AS SECOND LANGUAGE ACCENT, I AM BEGGING YOU STOP WATCHING AND WATCH SOMEBODY ELSE. THIS IS A PUBLIC SERVICE CHANNEL, BUT WE ALSO HAVE RIGHTS TO REFUSE TO SERVE U ~ GOOD BYE~