I've been watching your videos and they are really informative... thanks Man ... keep producing them...
@陳軒蓉-y4c8 жыл бұрын
When the front bumper is setting higher than 4mm(or above), it will effect the car move up and down the bank. Lower bumper keeps the car steady but it will also lose speed on the bank section. That is a difficult option to make...
@MadTangmini4wd8 жыл бұрын
+陳俊宇 not really~~ it is very stable. Even both rear and Front 4MM away from the ground, the car still very stable on the jump. you will realize when both front and rear have 4MM away from the ground, you will have two times brake on the slope~. Try it~~ you will know it is not that bad as what you think~
@陳軒蓉-y4c8 жыл бұрын
+Mad Tang Right, I have already changed my bumper setting. I will find a track and see what happen on it,Thanks!
@prancerjohnponce68898 жыл бұрын
hi madtang nice setups there i wish those parts can be bought in the philippines
@Killuakaew2 жыл бұрын
Thanks for your sharing
@not_riley8 жыл бұрын
Hi Mad Tang, where did you get that section of a bank? (not the cut out slope). The white and black one. Did you make it or can t be bought?
@christianchristina90014 жыл бұрын
Hello mad tang What is the best angle degree to pass slope and bank for front and rear brake?
@puff1n4698 жыл бұрын
+Mad Tang where did you get that body cover??? and how do you make those wheels on the red car with the white chassi
@john74297 жыл бұрын
Hey JT. What glue did you use to put together the setting ramp? I bought the same one but can't decide which glue to use... Thanks!
@kimrocacorba64285 жыл бұрын
Hello mad tang, What is the best clearance and BREAK for 80° Bank Thanks
@homenlok8 жыл бұрын
I was wondering how to make an angle on sponge break, thank you.
@MadTangmini4wd8 жыл бұрын
usually people cut an angle on brake~~ . or you can try to use angle maker to make an angle popsicle , then setup brake on top of that.
@damasgamingbuddy97496 жыл бұрын
nice info....just input for you, it will more helpful if you put some english subtitle
@JasonLeeKK8 жыл бұрын
Hi bro, one question. When passing the slope by long jump and keeping the momentum is faster or short jump and accelerate earlier on track is faster?
@tyopaengsworld75058 жыл бұрын
thanks idol..
@katanaTV8668 жыл бұрын
Hello Mr. Mad Tang. Can I ask how much height it is for the rear brake if you are using the standard(not long tail) setup?
@maxcrooz8 жыл бұрын
how about setting up for AO Jump Ramp, can you give tutorial settings for that ?
@question0258 жыл бұрын
Dear Mad Tang, i love all videos from you. when will you upload a video about AR ?
@MadTangmini4wd8 жыл бұрын
Actually MA and Ar setup are very similar. You can take look at MA setup first. But I understand their transmission systems are different . Anyway I will do AR when I am free
@question0258 жыл бұрын
Thank you , i will try it first and look forward to your AR VIDEO
@A_J_Mac7 жыл бұрын
would this work the same way for a loop lane change?
@coycyo15258 жыл бұрын
can you make a basic education lesson for AR chassis?
@tyopaengsworld75058 жыл бұрын
I mean what material do you use as break pads, do martials allow old tires as break pads?
@MadTangmini4wd8 жыл бұрын
regular brake package, item 15441
@peckloon8 жыл бұрын
hi mad...what is your brake height on the front rear?
@fauziresdian29828 жыл бұрын
hii mad tang! i have a problem facing interchange... can you share how to fix this problem... like setting brake, picking rollers, etc thanks
@t3ddyho6 жыл бұрын
still no replay from @mad tang, please share tutorial for lane changer
@tyopaengsworld75058 жыл бұрын
Hi MT hope your doing well do you use tires for brakes?
@MadTangmini4wd8 жыл бұрын
keep testing and get more experience , one day you will notice the different. also understand how to read track layout~~
@RighteousCrusade778 жыл бұрын
whats is the best chassis ? some ppl say super fm ..or ma
@MrRoldem5 жыл бұрын
how come if 90degree bank?
@eterna7000b8 жыл бұрын
how about lane changes. my car always trouble at lane changes. If I make the brake the high, its smooth on corner & slope, but always fly @ lane changes. My roller angle is 7 degree. but if setting like your white astute, its slow on slope & bank. can you explain how to setting on lane changes? thanks
@MadTangmini4wd8 жыл бұрын
+Romy Noer Lane change in professional setup~ it is nothing to do with brake~~ it is about the roller setup~ if you have enough angle on the front rollers, and more grab on left side of roller and enough contact surface, those will fix the problem of lane change~~
@eterna7000b8 жыл бұрын
Thanks for your explain. I use 7-10 degrees 19mm front roller. Its still flying at the top of lane changes, sometimes my tamiya is flip right at fly. Its like my tamiya is thrown to the left side of the track.
@MadTangmini4wd8 жыл бұрын
well~~ there must be something not right on your car~~ Use 5 degree should be very easy to pass lane change with correct setup. 7-10 degree barely nobody use it due to loose too much speed on cornering. Maybe check your stablizer? tires setup is low profile?
@eterna7000b8 жыл бұрын
Yup, tire is low profile. I built s2 & vs same as your tutorial on youtube. The character of the track in my country is 5-8 street then lane changes, so the car is running fast before lane changes
@eterna7000b8 жыл бұрын
You mean stabilizer on the top off roller screw?
@rabbilnurrahmat86878 жыл бұрын
can you make brake tutorial for AO jump for ma chassis. this ao always make me headache. thanx.
@katanaTV8668 жыл бұрын
+Rabbil Nurrahmat seconded!
@TheHarpanOnly8 жыл бұрын
What is the stabilizer you use on this video?
@MadTangmini4wd8 жыл бұрын
kzbin.info/www/bejne/eIalpql-mZ2CbKs
@judesoliman45498 жыл бұрын
how to make those type of stabilizers?
@MadTangmini4wd8 жыл бұрын
+Jude Soliman I post the picture on Instagram~you can take a look as sample, but need more professional machine to cut . Basically I was using two pieces of Carbon Popsicle to make that two stablizers ~ anyway, check my instragram ID johny2momo