MagDraft VS Cull Shad - (Which swimbait is better?)

Swim Bait VS Swim Bait - (Which swimbait is better?) What do you think? Let me know in the comments if you have thrown either of these, which one is your favorite or if you have found something you think performs better!
DIRECT LINKS:
Magdraft: www.avantlink.com/click.php?t...
CullShad: www.avantlink.com/click.php?t...
Thanks for watching!
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► Social Media: @MattBeckerFishing
Linktree: linktr.ee/MBeckerFishing
Instagram: / mbeckerfishing
Tiktok: / mbeckerfishing
My Website: www.mattbeckerfishing.com/
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
TACKLE & GEAR LINKS:
►FishUSA - www.avantlink.com/click.php?t...
►Favorite Fishing: www.avantlink.com/click.php?t...
►Yamamoto: www.avantlink.com/click.php?t...
►Bill Lewis: www.avantlink.com/click.php?t...
►Epic Baits: www.avantlink.com/click.php?t...
►BassFishin Electronics: www.bassfishinelectronics.com/
►Scott Hawaii Flip Flops: scotthawaii.com/collections/m...
►Seaguar Line: www-staging.avantlink.com/cli...
►Trokar Hooks: www.avantlink.com/click.php?t...
►Trick Step/Trick Mount: trickstep.com/
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
#mbeckerfishing #bassbaits #bassfishing
PLEASE SUBSCRIBE

[@oldfishermanandhisdog]

On the Magdraft, if it's running to one side, simply bend the head of the bait a tad to the opposite side it's running. Also, when skipping the bait to keep the hook in place, when you put the hook in the slot, just take the hook point and place it in the plastic on the inside of the bait.

[@MattBeckerFishing]

Good tips!

[@jeremycraig3482]

I've heard with the mag draft , if you get one that doesn't like to swim straight the magnet is off center when bait was molded

[@skidemn]

When you’re caught a few fish on the magdraft and the hook doesn’t stay in the slot, or if you lose the magnet, you need to find the third point on the treble that is welded on, then open it up to about 75°-80°, and stick the point into the bait. Next, pinch the remaining two hook points closer together, like on an albacore trolling hook, and you will increase your hookup ratio while keeping you bait fishable much longer. Also, get some Mend-it to fix any tears.

[@MattBeckerFishing]

Good tips!

[@edwardwicht5271]

Great advice. Thanks Matt!

[@MattBeckerFishing]

👍

[@johnnyweaver1300]

A great comparison of each!🎣👍

[@MattBeckerFishing]

Thank you!

[@edpelkey7798]

Great info Matt! Good luck at Dale Hollow! Since the slot limit is not in play there be more excitement for the pros and us fans 💯

[@MattBeckerFishing]

It should be a good one!

[@ThePerfectComboFishing]

Thanks for the information. I fished the MagDraft for the first time last year and loved it. Bought a second one and had the issue with the lean on retrieve. I fish a lot of dirty water so I may have to try out the ole Cull Shad.

[@MattBeckerFishing]

Appreciate you watching!

[@jefferyholland]

Most definitely a bait I need to throw more often. One of each please. Thanks Matt

[@MattBeckerFishing]

Thanks Jeff!

[@MrJohnB-qs6dp]

Thanks for sharing the differences between the two and when one is better than the other!! Best to you at Dale Hallow Lake!!! Will be cheering you on!! Stay Safe & God Bless!!!! 🤠👍

[@MattBeckerFishing]

Thank you!

[@dustinwalker8152]

If you haven’t, the Raid Osakana slide and Osakana swimmer are money, different type than those 2 but very legit. Edit: on skipping with the magdraft use the Ryugi keeper insert thingy, it’ll hold the in place. Also, if the magdraft isn’t running right you can somewhat tune it by twisting the line tie/harness slightly to the opposite side, think crankbait tinging. If that isn’t working, placing a small, like really small, nail weight in the bottom side of the bait will keep from running on its side.

[@MattBeckerFishing]

That’s some good info right there! I’ll try it!

[@timhigdonoutdoors5276]

Also, you can put a nail weight in the belly of the mag draft so you can reel it a little faster

[@MattBeckerFishing]

Yes you can but if it’s off slightly it won’t work right

[@patricklambert5622]

Fill in some of the cored out section in tail on cull shad to change the action !👍Hows the pond coming? Got any mud on your kabota tractor tires from working on?

[@MattBeckerFishing]

Pond has been on hold since it’s too wet! Hopefully soon!

[@FishermansFellowship]

It’s hard to get the Big Bite Baits B5, B6, etc. out of my hands. Breakdown the differences between those baits and the line-thru swim baits.

[@MattBeckerFishing]

I can do that!

[@chriscurtis8577]

I would like you to do a video on a clip eclipse cuz I want to see what it looks like

[@MattBeckerFishing]

Sounds good!

[@davidbrown-55]

Just arrived. Going to give the draft a try. Hope it’s gd to me.

[@MattBeckerFishing]

👍

[@dantwaites7097]

Got any tips on glide baits

[@MattBeckerFishing]

That video is coming soon!

[@DRDROP-fj4bo]

I bought a bass mafia loaded. I prefer the mag draft. The bml has a larger tail and is not as sutal swim as the MD. But the jury is still out on the bml, we will see.

[@MattBeckerFishing]

I haven’t tried that one yet

[@skidemn]

The Daingerous Swimbait is different than the Magdraft, but better in most way. It swims just as slow as the MD, but can be retrieved much faster than the MD without blowing out, which is particularly important when fishing from a drifting boat in current. if you ever fish in a river, you’ll quickly find that you can’t retrieve the Magdraft with anything, but the most painfully slow retrieve because it will immediately blow out as you attempt to retrieve against the current. If you really want to do a side-by-side comparison, get the Magdraft Freestyle and the unloaded Daingerous Swimbait and rig them identically. Both get better, but you will see you could do more with the Daingerous Swimbait. don’t get me wrong, I still fish the OG Magdraft too, but I have specific times and places where I think it’s action works best.

[@mischievousfish151]

I just learned how to tune a mag draft when it doesn’t swim right from Jacob wheeler’s top baits for April. Super simple but 🤯. Check out his vid

[@MattBeckerFishing]

I’ll check it out, thanks!

[@YankeeDoodle2]

How are you going to twist the narrative to make the james Watson situation seem good?

[@MattBeckerFishing]

Did something happen with James Watson?

[@YankeeDoodle2]

@MattBeckerFishing I'll pray for you buddy you need Jesus not boyd duckett put your trust in the lord Jesus Christ not a liar like boyd do not worship the beast

[@MattBeckerFishing]

I absolutely do put my trust in Jesus. What has Boyd done to you personally? I’m not sticking up for anyone I’m just curious how he has personally affected you or the last time you talked to him directly?