Рет қаралды 5,020
If you have no resistance across the wall plugs pos/neg terminals, your thermal fuse is blown, this video is for you. If you have 1.2K Ohm resistance, then something else is wrong.
i learned to keep my machine well away from anything in the back, i had a jar where the fuse lives right behind my machine, thinking it was no big deal. The radiant heat it from it back to the machine was enough to blow the fuse.
Specialty items to perform this repair:
1. Digital Multimeter (continuity specifically)
2. Thermal Fuse: a.co/d/cXXO1XR
3. Security Bit: TA30 (Trianglular) a.co/d/7FDhx2I
4. Crimp Tool: a.co/d/d183SdM
5. Wire Crimps: a.co/d/dd7J22f