MAGLEV Magnetic Levitation Train | Magnetic Games

[@gorge5412]

Great demonstration! THANK you.

[@medivo7]

Real maglev train uses superconductors and electromagnets. If you use neodymium magnets better idea is using magnets only in train to reduce weight of a train and surface friction.

[@MagnetTricks]

That's quite an apparatus you have build :) I like it! Interesting project!

[@princeradclifflapuz3865]

Nice!

[@Sarvesh_152]

it is bery nive ideas for new generation

[@luther_const]

If You made fan maintained downside, the system could be more sustainable. I mean low weight center. Anyway, thnx for what You've done :)

[@MagneticGamesIT]

Thank you for watching :) ... and yes, lowering the center of gravity would have helped :)

[@sakthibalajim]

cool and simple project

[@dalipekimberlygracec.9027]

Magnetic games , I think this project is the best project that I could present to my teacher .so I have a question ....did you use batteries to make the propeller work...?

[@MagneticGamesIT]

You can, but it becomes difficult to turn on and off the propulsion so the switch will be on the train

[@basavaraj1684]

How did you arrange 12v fan ? Please provide the link.

[@arungokul8844]

its works on the propulsion of air due to fan rotation . To avoid the friction only u used magnet rite.

[@MagneticGamesIT]

with this method the clutch is reduced but not canceled, in fact the transparent sides crawl on the rail

[@刘猫]

i advise that two ways for improving this system. first substitute the permanent magnet with some electromagnet, because if you try this experiment with a longer railway, you don't need to find so many permanent magnets. second is to notice the friction between the plastic board and the railway. when the "metro" goes, it must be vibrating all the time, so this vibration can lead to the friction and the friction will slow it down. try some way to reduce it.

[@MagneticGamesIT]

+刘猫 thanks for the advice, the friction problem I know him well, I have worked hard to reduce it but it is very difficult to cancel it. The solution electromagnet instead of the permanent magnets is much better, it is possible that in the future I will make an experiment

[@刘猫]

Magnetic Games my opinion for reducing friction is: to make four wheels.then fix two wheels on each plastic board.the wheels's diameter could be very small and the surface should be smooth enough and they can be rotated easily.but the diameter of wheel need to make sure that any vibration cannot make the plastic board and the rail touch any more.so because the friction is not produced by the gravity of the cart itself, it will not go a very large value actually.

[@frank6587]

刘猫 No don't reduce friction for wheels, as more friction = More grip for the wheels and smoothening the surface would be like running with on wet tiles with rubber shoes, however you can make indents where the wheels will go which can help guide the train with much less material

[@reneeisabellaroa2532]

I have a questions. Can this model still demonstrate lateral guidance? Thank you!

[@GianniLaschi]

Forte ! ...vedo che di magneti non te ne mancano ;)

[@MagneticGamesIT]

+Gianni Laschi Grazie, non ho mai fatto il conto ma no ... non mi mancano :-)

[@AVAMagneticlev]

Goin large ! Nice ! Adam VA of AVA MAG LEV

[@MagneticGamesIT]

+AVAMagneticlev thank you Adam :-)

[@ayushchaudhary2273]

Thanks, i was about to make it but was wondering how to balance the train. Great job

[@MagneticGamesIT]

thank you :)

[@rajeshbora9528]

What grade of neodiyum magnet r u using?

[@Heinrich_yt]

nice idea! Good Video

[@MagneticGamesIT]

+LätzPläy thank you

[@packleader1215]

I'm jealous of the ancients technology. Tesla already knew about wireless technology

[@OodldoodlNoodlesocks]

Ol' Musky does it again.

[@mauriziocavazzoni7045]

Avete riscontrato che il treno nel suo avanzare incontra una certa resistenza? A cosa potrebbe essere dovuta?

[@MagneticGamesIT]

lateralmente c'è un po di attrito tra le lastre trasparenti e la rotaia

[@mauriziocavazzoni7045]

Pensavo invece si trattasse della densità del flusso magnetico che secondo me si presentava sia anteriormente che posteriormente al treno. Grazie per il riscontro fornito.

[@syedmisbaulhasan3943]

once connecting bettery wire it will go fare to call it back connect the wire opposit to iron BARS..

[@aparnanikam624]

On reversing polarity, the train would even go reverse but slow.

[@OneOfDisease]

looks like 1 solid piece of unistrut for the track and you are shorting some power supply across the track to transfer power to the cart...the cart is essentially in parallel with the track and gets same DC voltage but very little of the current as the impedance of the strut is almost nothing? Or is there a hard to see electric wire taped to the rail we can't see?

[@MagneticGamesIT]

there 'no electric wire that transmits current. the current is transferred through the sheet metal rails. In effect, the electrical resistance is high, in 3 meters of rail lose 2 volts

[@frank6587]

If you reversed the current you put in the steel tube would it reverse the fan or still go forwards ?

[@MagneticGamesIT]

the fan goes to DC 12V, if I reverse the cables does not move more

[@frank6587]

That's weird, because normally when you reverse the current it goes reverse e.g. Clockwise motion becomes counter-clockwise

[@MagneticGamesIT]

It is correct, but if the fan rotates in the reverse, not by a thrust sufficient to move the train

[@frank6587]

So there isn't enough thrust to move it in reverse ?

[@hellorvce]

is it the same principle with hyperloop

[@kamalnath828]

Almost same but not same

[@kamalnath828]

Hyper loop works same as bullet train

[@manavendrasingh3414]

that fan looks funny.. try making a guide way track

[@flightisallright]

The prop twists the cart and presses one side against the rail. Lots of friction.

[@CrackedTubeGamer]

Could add in a secondary one counter rotating at the front right?

[@icechanz8279]

i don't see any big fan in my daily train :P

[@ks8856]

OMG I'm so excited to see this, I want to constructed just to play with it! Where I can get this magnets?

[@MagneticGamesIT]

link in description :)

[@halukyalman]

Hello, with my students we are in the middle of a project. We are also planning to build a wehicle like your train. We can't have a propeller on the train and we can't touch the train as well but we need to be able to move it. What would be the best way to move it? I thought about having more magnets in the back of the train (-) and push it with some magnets(+) in our hands ( without touching it. ) or a small fan in our hands and a small sail on the train. Do you think these would move the train? What was the friction like on your train?

[@friskyAMV]

What are the ratings of the motor....Nd could u plz provide the specifications of the motor and fan gear system.

[@MagneticGamesIT]

this is the link of product www.aliexpress.com/item/Top-Selling-Best-Promotion-Protable-12V-Powered-Mini-Auto-Car-Truck-Vehicle-Cooling-Cool-Air-Fan/32723058063.html?spm=2114.01010208.3.9.Mmks6S&ws_ab_test=searchweb0_0,searchweb201602_4_10000073_10000077_10000074_10000167_10000175_10000069_10000068_10000062_10000063_10099_10000156_10000158_10096_10000056_10000059_10000097_10000094_10000090_10000091_10000147_10000144_10084_10000150_10083_10000011_10080_10000153_10082_10081_10110_10111_10112_10113_10114_10000089_10000086_10000083_10000135_10000080_10078_10079_10077_10073_10000140_10070_10122_10123_10121_10126_10124_10065_10068_10000132_10000033_119_10000030_10000126_10000026_10000129_10000023_10000123_431_432_10060_10062_10056_10055_10054_10059_10000120_10000020_10000117_10000013_10103_10102_10000114_10000016_10000111_10000213_10052_10053_10050_10107_10000214_10051_10106_10000101_10000100_10000104_10000045_10000108_10000191_10000197_10037_10000179_10000042_100003_10000039_100001_10000036_10000187-10000213_10000214_100001_100003,searchweb201603_10,afswitch_1,ppcSwitch_1,single_sort_2_default&btsid=513a47cc-ad3a-40fe-a83f-77bfd26c599a&algo_expid=1fc03a4d-92f3-4d40-9fbe-f3b092a50920-1&algo_pvid=1fc03a4d-92f3-4d40-9fbe-f3b092a50920

[@KnowPlants-5]

can u suggest me a best project that can be more cost

[@lars3321]

what if you turn all magnets a bit slighty, would it push the cart away without the proppeller?

[@MagneticGamesIT]

+Lars should use an electromagnet on the rear of the train, it would be the operating system of the real MAGLEV

[@lars3321]

Magnetic Games oh it actualy already excist? lol didnt know that. Sounds like the future of all trains

[@ArunKumar-zq9cw]

How much volts current should be needed to propel the train ?

[@lacybs3108]

God loves you and Jesus saves.

[@rahimlilac]

Kindly provide the names and quantity of the apparatus used in this Magnetic Levitation Train in detail. Thank You

[@MagneticGamesIT]

on instructables you can read all info you need www.instructables.com/id/MAGLEV-Magnetic-Levitation-Train-Model/

[@rahimlilac]

Thank you once again..

[@javedphoto]

Nyc idea!

[@ranjankumarnayak1047]

Can you give us this project in finished form?

[@charliederuiter4715]

And love this video

[@MagneticGamesIT]

+Charlie de Ruiter thank you :-)

[@relinroshan2768]

Can i buy that sir

[@hemrajdeshmukh00]

Amazing

[@srinivasuluvelagambeti834]

Hi sir can i use neodymium magnets 15×2mm coin type instead of 15×4×4 Is it works?? Suggestions pls I'm doing this project with some modifications..

[@MagneticGamesIT]

it might work but you would have more difficulty

[@srinivasuluvelagambeti834]

@@MagneticGamesIT thankyou for ur reply sir I didn't found neodymium 15×4×4mm Can you pls suggest another neodymium magnets????

[@srijalmishra9129]

how will u stop it

[@meharhamza4645]

Hey you done a very good job! Actually I am making this project for my school.. I am having some issue related to stability! Do I need to fix the glass tightly to the track? Or There is a distance between plexi glass and track? Please guide

[@MagneticGamesIT]

between the transparent sheets and the monorail there must be little space, less than one mm per side. Good work :)

[@buvaneswaranpadmanabhan3254]

whatsapp [phone]

[@itsyourchoice7479]

my train is tilting at one side.......what to do? please tell this is my project in school. and can i use blaster motor

[@MagneticGamesIT]

To avoid lateral tilt the two side bars must be long, rigid and must be slightly wider than the rail, no more than one millimeter per part

[@tbavatar9730]

We have the same problem over here! How did you fix it? Thanx

[@paulsawford7827]

Can I ask, would temporary magnets produce the same kind of lift?

[@MagneticGamesIT]

+paul sawford the magnets in this experiment only serve to levitate the train and reduce friction to a minimum to minimize the power of the engine. for an elevator would not serve

[@P8qzxnxfP85xZ2H3wDRV]

You mean electromagnets? Yes. Also you need electromagnets, because to really make a maglev train, you need to change the magnetic field over time, to keep the train from falling off the tracks, without the guiding rails. There's no arrangement of permanent magnets that can secure another magnet at a certain point in space, aka magnetic levitation. All arrangements of permanent magnets are in some way meta-stable. You can overcome this by using superconductors, but then those are also considered meta-stable, because instead of "regulating" the field, you "regulate" temperature.

[@hamburgtech]

Hi friend, very nice train :-) How much did you spend on the magnets? You should really make a circle track, then it can go for hours, also a more quiet fan would be better ;-)

[@MagneticGamesIT]

thank you . not remember how much spent. the circle track is not very easy to do

[@husainhardwarewala8161]

plz be inform from where you purchase this permanent magnet pieces??

[@MagneticGamesIT]

link in description :)

[@buvaneswaranpadmanabhan3254]

whatsapp [phone]

[@sujitkumar-cj5ud]

Can you do this experiment with electromagnet. because these Magnets are so expensive

[@MagneticGamesIT]

also electromagnets are expensive ... and more difficult to use

[@mohammedshahed3432]

how to apply brake other than the stopping the flowof electric current?

[@XeLYoutube]

parachute

[@abhirajanand6221]

plz tell that will it move forward

[@murugesanmanickam8759]

You tell that from were you got the magnets

[@al-py2qr]

les aimants on un coup bien trop elever et sont trop rare pour en faire des rails, de plus le ventillateur fonctionne sur battery et n'offre aucun control, pour en faire un train ... ... cependant cela ressemble a une catapulte pour planeur :)

[@razorplayzhd5152]

How do you move your hands so fast

[@hihihhihihihihujdhwosjgka439]

RazorPlayz HD He sped it up dumbass

[@damemes3669]

XD

[@ChristoCJ03]

speed force within him

[@abhirajanand6221]

will it really move forward

[@MagneticGamesIT]

yes ... no trik in the video

[@prudhvimenta8150]

how many magnets r required to do dis experiment nd cost of magnets req to dis

[@MagneticGamesIT]

in description you can find links and info about this

[@alanaalverson7798]

can you put the link for the magnets you used?

[@MagneticGamesIT]

link in description :)

[@KnowPlants-5]

what is the size of the magnets u used

[@MagneticGamesIT]

15x4x4 mm the link of product is in the description

[@sakthibalajim]

can u specify the the magnets,motor used in this video

[@MagneticGamesIT]

it's a 12v fan for car link of magnet in description

[@basavaraj1684]

@@MagneticGamesIT can you please provide link for 12v fan .. Please 🙏

[@charliederuiter4715]

Soo 175$ then cool!

[@suriyafansnedumangad9976]

What is the glass that you have used

[@MagneticGamesIT]

it's perspex

[@abhirajanand6221]

can I use bar magnet?

[@MagneticGamesIT]

You have to pay attention to the direction of the magnetic field. The magnets I used in this experiment have the direction of the field perpendicular to the 4x20mm side and not to the 4x4mm side

[@susanxyz5730]

Hell ya!!!!

[@murugesanmanickam8759]

From where you got the tracks

[@MagneticGamesIT]

they are frame pieces to make plasterboard walls

[@lagreefitnesshq6522]

Really cool. Are you still working with magnets? I have a project I may want to hire you for. How can I get in contact with you?

[@MagneticGamesIT]

thanks you :) ... you can find my contact in info tab of my channel

[@lagreefitnesshq6522]

Thanks, I will contact you now.

[@pomerdavison5327]

tell me the materials you need and where you got them

[@MagneticGamesIT]

in description there is a link with more info about this project

[@abhirajanand6221]

plz tell why my train is tilting

[@charliederuiter4715]

Wow do this for about 300$ maybe your choice

[@MagneticGamesIT]

+Charlie de Ruiter it's around 150$ for magnets 15$ for fan 10$ for various material.

[@itsyourchoice7479]

CAN I USE BAR MAGNETS

[@MagneticGamesIT]

You have to pay attention to the direction of the magnetic field. The magnets I used in this experiment have the direction of the field perpendicular to the 4x20mm side and not to the 4x4mm side

[@itsyourchoice7479]

ok thank you..........but will it move forward with 12 voltmeter

[@KnowPlants-5]

what is the name of the magnets u used

[@MagneticGamesIT]

they are neodymium magnets the link of product is in description

[@KnowPlants-5]

thank u

[@titengamingzone]

80 price magnet ketne ka hoga

[@abhirajanand6221]

my train is tilting in one side .why please tell??? I have to make this in school

[@MagneticGamesIT]

The magnets in repulsion are unstable, it is necessary to tie the track train well with long and resistant side supports

[@leonardocremonesi1887]

Hi everyone I'm trying to build it, can anyone tell me what si the NAS? Because I don't know what it is and I don't know where to buy it Thanks

[@MagneticGamesIT]

+Leonardo Cremonesi ciao leonardo sono italiano. La nas è un piccolo server ... Non è il caso di comprarlo apposta x fare questo esperimento prova ad arrangiarti con pezzi di plastica o legno di recupero avvitati o incollati insieme.

[@leonardocremonesi1887]

Magnetic Games ah scusa non credevo fossi italiano ahah comunque grazie, proverò a costruire qualcosa io! Se utilizzo un pezzo di metallo il peso non dovrebbe influire giusto?

[@MagneticGamesIT]

Il peso non è il problema , ma nel metallo anche se non è ferromagnetico si generano delle correnti patassite che possono influire negativamente sull esperimento. Se puoi meglio la plastica

[@leonardocremonesi1887]

Magnetic Games va bene grazie per la disponibilità 👍🏼

[@leonardocremonesi1887]

+Magnetic Games ciao avrei bisogno di farti qualche domanda sul progetto (che sto portando avanti) perché sto riscontrando problemi (in particolar modo la struttura di plastica con sotto il cartoncino coi magneti si attacca al binario sottostante e invece che levitare si attacca). Sarei grato se mi potessi dare qualche consiglio, qui la mia e-mail [e-mail]

[@itsyourchoice7479]

plz tell why my one is not moving forward

[@MagneticGamesIT]

i need some more info ... probably you must reduce lateral friction

[@ritammandal9099]

Op

[@neychannel114]

where I can found this magnets

[@MagneticGamesIT]

on supermagnete.com ... link in description

[@friskyAMV]

I want some suggestions on my project from u as soon as possible

[@josephbruceismay6832]

magnets :D

[@MagneticGamesIT]

it's fun :-)

[@truptiwaghmode7310]

Its very costly

[@emirmikael1196]

is not to fast

[@charliederuiter4715]

Or 1000$