No video

Magnetic Levitation - Interesting Possibilities

  Рет қаралды 17,915

SuperMagnetMan

SuperMagnetMan

Күн бұрын

Пікірлер: 64
@shepatown
@shepatown 2 жыл бұрын
The most non-polarizing video I've seen all day. Great work!
@njjeff201
@njjeff201 3 жыл бұрын
I’m really attracted to this!!! Love to see a video on the Navy’s new magnetic launch system
@mattman8685
@mattman8685 3 жыл бұрын
Thank you so much! I've been waiting on this video for a while! Great work! And the prymid mags I ordered are awesome btw!
@krabkit
@krabkit 3 жыл бұрын
i understand that it might be hard to get bismuth to float on a magnet due to the much weaker diamagnetism, likely needing a piece too thin to be of any use. however why wouldn't the pyrolytic graphite enhance the effect of the levitation when replacing the bismuth in the mechanism. i would think that it would allow for a larger space between the plates and thus more room to hold weight as the upper magnets were brought closer.
@SuperMagnetMan
@SuperMagnetMan 3 жыл бұрын
From my experience the pyrolytic carbon requires a "checkerboard" configuration to work. If you placed them around the other magnet it would be hard to keep it from wanting to jump over to the magnets being used with the pyro. It might be possible that if you had like a 6 inch diameter circle and the same magnets that you might be able to rig up something like outriggers with pyro at the edges that helps to stabilize the magnet in between the bismuth. Good idea - will have to give it some thought.
@SuperMagnetMan
@SuperMagnetMan 3 жыл бұрын
Good question - I did not specifically test a combination of the two materials but I can think of a design that would look like it had outriggers on on the ends of the outriggers we could have pyrolytic carbon pieces above magnet cube sets and gain some lift and stability over the bismuth. I will have to think of how to try it because the large magnet at the top puts out such a large field and I would need to get the outriggers out beyond that field and I am not sure if the additional weight of the outriggers would exceed the repelling force of the pyro. AND that is why we make things and test them. I will give this more thought and put it on the board.:) Thanks
@nacoran
@nacoran 3 жыл бұрын
That's kind of close to something I have been trying to work out. I play harmonica. I have an acoustic experiment I want to do but I can't quite work out the test setup. On my drawing I've got 4 posts, like you have. There is a platform- it's operating like a reed plate would on a harmonica. The reed would be shaped like a capital letter 'I' (with the four numbs on it, the font on KZbin doesn't show.) The nubs would have a hole so you could put the posts through it while keeping them off to the side so that you can still blow on the reed to get it to move. There would be a cut out in the reed plate so that the reed could move up and down through the hole, with very minimal gaps around it to keep it air tight in the rest position. Each set of posts would have a pair of very small spring magnets on it, and each end would be threaded so that you could turn a nut to compress the spring magnet. I'm hoping that will allow me to change the natural oscillating frequency when you blow across the reed. If I can set this up in a tiny box I can build air pressure by blowing into the hole on the box, forcing the air out the reed hole, and the magnets, hopefully, will push it back, creating a pulse similar to a normal harmonica reed, but with a much 'simpler' straight reed shape that will be much easier to experiment with. The problem I'm having is finding matching little parts that all work together. I have a theory that by changing the shape and width of the hole the reed is oscillating through I can create different tone types, and even possibly multiple tones with one reed. I really need to get over to my friend who is a jeweler and see if he could make some parts for me.
@infidelapostate3094
@infidelapostate3094 3 жыл бұрын
I think it's _interesting_ that the N/S pole orientations match the male/female arm orientation in the "Party Levitation" chair lifting trick...
@mayerzyify
@mayerzyify 2 жыл бұрын
Found your channel from Kenneth Wheeler. Very impressive knowledge Sir. 👊👊
@jessicamckay9227
@jessicamckay9227 3 жыл бұрын
Bismuth can build into a hollow pyramid shape easily when cooled slowly. Would this affect the diamagnetic properties in the same but opposite way as a haloid magnet
@foxpup
@foxpup Жыл бұрын
Cones too, not just pyramids. :-) Actually a cone is a pyramid with an infinite number of sides, so technically I'm not contributing anything here. ;-) LLAP
@magncity1817
@magncity1817 2 жыл бұрын
Loved this video and your thought process…it appears that the diamagnetic work similar to Lenz’s Law…thus the instability as that law describes a movement in a field gradient. Maybe by vibrating your magnetic cube this will cause an increase in the effect.
@kebertxela941
@kebertxela941 3 жыл бұрын
I thought the CMR Tech doohickee would have to flip over to snap together?
@SuperMagnetMan
@SuperMagnetMan 3 жыл бұрын
No, it is actually multipole magnetized in concentric rings so that the north and south poles are on the same side and the slightest movement off of dead center and it snaps together. This is their Hover field magnets.
@petera.watters4459
@petera.watters4459 2 жыл бұрын
really interesting video. I learned about you from Ken😊
@Creomortis
@Creomortis 2 жыл бұрын
Would this sandwich of materials react like a superconductor? Or is the resistance of the material still the same?
@NFZ138
@NFZ138 2 жыл бұрын
Thanks SMM
@chrisfrary724
@chrisfrary724 3 жыл бұрын
So glad you still make great videos. Hope you are doing well 👍 🧲
@333STONE
@333STONE 3 жыл бұрын
Here faster than light
@ShawnJonesHellion
@ShawnJonesHellion 3 жыл бұрын
I'm still a noob to some science but what happens if you apply voltage to any of this? Or set the magnets up in parallel and/or another configuration by increasing the number of magnets stacked? I always seem to want to see the specific field an changes to the field with each adjustment. Also do any changes occur if you place multiple of these in parallel/square an then alter their directions as well.
@LightVortexMatrixStudy
@LightVortexMatrixStudy 2 жыл бұрын
We figured out magnetic levitation 70 years ago. Copied from the Pharaohs 35k years ago. Now I'm working on removing dia magnetic oxides from blood. If you're not part of the Agenda help would be a benefit to humanity. Good video as always MM. Thanks.
@wowalamoiz9489
@wowalamoiz9489 2 жыл бұрын
The agenda? A conspiracy's lifespan decreases with the addition of every person. Any conspiracy you are entertaining with millions of members could not last a day.
@gleambrite2679
@gleambrite2679 Жыл бұрын
Bismuth layered with aluminum and coated with polylitic carbon would be interesting. All the properties needed for electric levitation.
@princeoftheblues
@princeoftheblues 4 ай бұрын
Great work. I too am an engineer and experimenter. You might like my videos about using electrets to run electrochemical cells, and about breaking the second law of thermodynamics (very well). I am manufacturing more electrets now. We work hard every day for nothing but knowledge.
@willshiels1091
@willshiels1091 Жыл бұрын
Do you think if you made the top magnet electromagnet you could lower and raise the bismuth and plastic with different power settings rather than adjusting the top magnet????
@spamspammesen5970
@spamspammesen5970 3 жыл бұрын
I really like the bismuth setup at the end there! But it seems awfully inefficient to use a huge magnet that far away. How about using a smaller magnet with iron pole pieces to focus the magnet lines to go where you need them instead. I would imagine it will be possible to use much smaller magnets. Or will this mess up the uniformity of the field lines to much?
@HoldmyARK
@HoldmyARK 3 жыл бұрын
Ken wheeler recommended you! Thank u
@SuperMagnetMan
@SuperMagnetMan 3 жыл бұрын
Awesome! Thank you! - That is great to hear - I have been trying to catch up on Ken's latest videos too:)
@paulmaydaynight9925
@paulmaydaynight9925 3 жыл бұрын
@@SuperMagnetMan if your into ken's work, you should probably look to ' Fractal Woman' s channel as she translates and expands on several peoples idea's in a practical real world enjoyable way.
@ravdobrzynski
@ravdobrzynski 3 жыл бұрын
Magnetyczny wykład
@dollabz777
@dollabz777 2 жыл бұрын
You can achieve stable levitation simply by spinning one of the magnets at high RPM. In appearance, this is superficially equivalent to a sort of room temperature quantum locking effect. Action Lab has a great video demonstrating the phenomenon.
@robertlavedas4964
@robertlavedas4964 8 ай бұрын
Curious, Dielectric mirrors, use interference based reflection(90+ % reflective), Has anyone tried using pyrolitic carbon or bismuth, or both, to create the equivalent of what a Dielectric mirror does with light only with magnetic flux /force? Next, you define magnets/magnetism as 1 force, acting as multiple poles(configurations that give the illusion of two poles, two forces). Correct😜.
@paulmaydaynight9925
@paulmaydaynight9925 3 жыл бұрын
George , you should probably talk to Robert and send him a bunch of the factories powder mixes (can they magnetise it in a container without baking it?) and related materials as a pr magnetic advertising package to see how he can reprocess them in to Nano powders and then apply it to his conductive inks etc, go chat with him about tinkering and power storage proof of concepts and collaboration after brexit too.^_~ 'Robert Murray-smith magnet' remember, it's hard to engineer anything without the materials to make it ^_~
@SuperMagnetMan
@SuperMagnetMan 3 жыл бұрын
Thanks - I will check it out. A few years ago, as I understand it, the Chinese government made it much more difficult to obtain neodymium magnet powder. We carried some for many years and then they said they were not able to ship it any more. No clue as to why. I have since found a source for super fine (2 - 5 micron size particles) iron powder. I assume that the info you listed is how to find him on YT. Thanks
@paulmaydaynight9925
@paulmaydaynight9925 3 жыл бұрын
@@SuperMagnetMan yeah, you may not have noticed yet but yt seems to have now blocked comments from using direct url's now mostly. way to go yt, so i use 'whatever name title' now to find referenced content...
@seshagiridama
@seshagiridama 2 жыл бұрын
Ken say Applied inverse coherent force image to cause levitation. It means rotating magnetic fields in opposite direction. 4 pole 12 cube magnets circular halbach array along with field displacement isolators will create rotating magnetic field. No moving parts.
@dollabz777
@dollabz777 2 жыл бұрын
How?
@seshagiridama
@seshagiridama 2 жыл бұрын
Ken say don’t ask me how to build constructs.
@dollabz777
@dollabz777 2 жыл бұрын
@@seshagiridamaMaybe Master Ken have 700 KZbin accounts. Log in log out. Leave bullshit everywhere.
@Mazokn
@Mazokn 3 жыл бұрын
Perhaps incorporating a circular Halbach’s array could balance it into position
@HitAndMissLab
@HitAndMissLab 2 жыл бұрын
phenomenal video. did you say you have a shop with magnets?
3 жыл бұрын
Hello Mr. Magnet. i need to know if a very powerful magnet will make an electric engine stronger or more economic on battery.
@ginadisantis2684
@ginadisantis2684 2 жыл бұрын
I'm very interested in magnets for healing properties. do U have any suggestions on where to go? also where do I go to buy a pyramid magnet? Thank you. 💖
@khalaf_stocks
@khalaf_stocks 3 жыл бұрын
Is magnetic powder the same as iron powder ? I wonder if you can answer this question , thanks.
@ginadisantis2684
@ginadisantis2684 2 жыл бұрын
Greetings George, Question... what is the safest way to take the magnet out of a very old micro wave? Ken Wheeler shared you,on his last veido.
@bankbank
@bankbank 3 жыл бұрын
great video, highly informative
@SuperMagnetMan
@SuperMagnetMan 3 жыл бұрын
Thank you:)
@mordakoAT
@mordakoAT 11 ай бұрын
How much effect does the Meisner effect have on super magnets? I was inspired to ask this questions by the video found here: kzbin.info/www/bejne/jmaooIh6Yqd8qdU
@acewoodworking428
@acewoodworking428 3 жыл бұрын
Thank you for doing what you do.
@SuperMagnetMan
@SuperMagnetMan 3 жыл бұрын
Thanks for watching:)
@robinhooper7702
@robinhooper7702 3 жыл бұрын
I think you need to clarify, for your audience, between levitation and suspension. Your bismuth setup is a combination of both and not as your title implies.
@SuperMagnetMan
@SuperMagnetMan 3 жыл бұрын
Interesting point - I will check on it. Thanks
@robinhooper7702
@robinhooper7702 3 жыл бұрын
@@SuperMagnetMan Thank You for having an open mind in this regard.
@bankbank
@bankbank 3 жыл бұрын
what is the distinction between the two?
@robinhooper7702
@robinhooper7702 3 жыл бұрын
@@bankbank levitation is to be held up from underneath and suspension is being held up from above.
@bp8085
@bp8085 25 күн бұрын
@@SuperMagnetManhey I just found your channel how are you doing are you still interested in creating videos. I love your professional demeanor and simplicity and your accent is awesome
@timivers5372
@timivers5372 2 жыл бұрын
Can electromagnets produce diamagnetism
@foxpup
@foxpup Жыл бұрын
Short answer: No. But the electromagnets driving the motors for refrigeration units that cool superconductors do because superconductors are VERY diamagnetic. :-)
@DJ-mj5pq
@DJ-mj5pq 3 жыл бұрын
Interesting ideas and informative. I was surprised that you self identified as a ? Power Systems engineer? yet proposed a electromechanical servo to move the large magnet rather than an electromagnet under servo control. Much simpler...
@SuperMagnetMan
@SuperMagnetMan 3 жыл бұрын
Electromagnet solutions have been around for a very long time - the problem is that the frequency of the sampling from the transducer induces a vibration in the object being suspended because it is sampling the position x time per second and making micro voltage adjustments and the object has that vibration. THat is not the same as moving the magnet to the neutral position one time and then it balances that load and only changes if the load changes - hence no vibration.
@DJ-mj5pq
@DJ-mj5pq 3 жыл бұрын
@@SuperMagnetMan As with any control system, the feedback function would have to take the force function (apparently a function of position) as well as the mass and therefore the natural frequency of the mechanism. If a discrete time control as you have suggested, the sampling rate would have to be sufficiently high to avoid the "vibration" identified as a problem. Analog controls wouldn't have this issue.
@goddyfame3424
@goddyfame3424 2 жыл бұрын
I have a levetating solution but for world security reason, I will keep it to myself. If I share my solution, it will make Nuclear war more likely as my levetation solution will improve the efficienby of Missile defense systems to 100% giving the country that possess it the confort to use nukes. So I will keep this out of the world until the evil men come up with it on their own. The current Mission to the sun seem to be a cover for Both Speed Of Light Propulsion as well as Use Of Flare as Missile Defense. I hope the Russians and Chinese are smart enough to know that is what is going on and Turn on their signal collection systems and decode the data as quickly as possible and develop counter measures as quickly as possible to save the world from evil men who want to dominate the world.
Magnetic Vortices in motion and Magnetic Gradients
15:56
SuperMagnetMan
Рет қаралды 13 М.
World's Strongest Magnet!
23:05
Veritasium
Рет қаралды 12 МЛН
Кадр сыртындағы қызықтар | Келінжан
00:16
طردت النملة من المنزل😡 ماذا فعل؟🥲
00:25
Cool Tool SHORTS Arabic
Рет қаралды 9 МЛН
Flywheel Battery
14:49
Tom Stanton
Рет қаралды 8 МЛН
Why Sugar Always Twists Light To The Right - Optical Rotation
18:39
Steve Mould
Рет қаралды 1,3 МЛН
Factors Affecting Eddy Current Drag
21:43
SuperMagnetMan
Рет қаралды 16 М.
Pyramid Magnets - Understanding how they work
20:08
SuperMagnetMan
Рет қаралды 58 М.
Professor Eric Laithwaite: Motors Big and Small - 1971
19:41
Imperial College London
Рет қаралды 2,4 МЛН
Reusable handwarmers that get hot by freezing
18:25
Technology Connections
Рет қаралды 2,8 МЛН
We Recreated CIA Technology, It Was Surprisingly Easy (Microdots)
17:26
The Thought Emporium
Рет қаралды 540 М.
Lenz's Law
15:54
D!NG
Рет қаралды 6 МЛН